Hogs and Wood Grinders For Sale

Challenger Grinder with 10' Infeed Steel Belt, On Board Hydraulics.

Challenger Grinder as pictured

This grinder was removed from service in good working condition. It is ready to load/currently in storage 200 HP Main Motor Cutters 117 F-Cutters Screen (4 ) 22" Diameter Wide with 1-1/2" Holes The width is 51” and the height is 17” (infeed opening)

Believe Champion Swing Hammer Hog 30"

CP100 Can Flattener --220V, 1200 lbs per hour --Infeed Conveyor --Magnetic Separator -- New belt included

CRESSWOOD EF-30LR HORIZONTAL WOOD GRINDERThe Cresswood EF-30LR Shredder is built to take on your toughest wood waste challenges. Designed for high-volume shredding of pallets, crates, rippings, cut-offs, blocks, and particle board, this horizontal end-feed grinder ensures consistent material flow and maximum throughput. Its durable construction and smart engineering make it ideal for heavy-duty use in lumber yards, manufacturing, and woodworking facilities. With an intuitive design and powerful components, it's built for long-term productivity.Key Features & BenefitsOptimized Material Flow with Variable Speed Feed Roll• Get consistent feed performance, no matter the material size or density• Automatically adjusts feed speed to prevent jams or overloads• Handles a variety of wood waste types with easeRugged Construction for Long-Term Durability• Built tough to withstand years of industrial use• Heavy-duty steel frame resists vibration and wear• Spherical roller bearings increase strength and longevityAdvanced Cutting Technology for Maximum Output• Delivers consistent particle size and clean, efficient cuts• Equipped with a high-efficiency Destroyer Cutterhead• Replaceable anvil supports extend component lifespanSmart Operation & Maintenance Features• Designed for easy servicing and user-friendly controls• Easy access panels simplify maintenance and part replacement• Standard 12′ vibrating conveyor ensures reliable outfeed

CRESSWOOD HF-36-30 Wood Grinder --Motor HP 30 --Cutting Chamber 36″ x 45″ --Ram Stroke 30″ --Rotor Diameter 10″ --Grinding Head Speed 50-150 rpm --Frame Thickness 3/4″ --Number of Cutter Teeth 42 --Shaft Diameter 4″ --Mid-Range Hopper Volume 2.5 Cubic Yards --Floor Area of Unit 71″ x 195″ -- Includes Control PanelShipping Weight 5,700 lbs. Specifications are subject to change The output of these machines can be optimized for your application by selecting different screens, amount of cutter teeth, cutter teeth placement, and rotor selection";

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

Cresswood EF24-50 Grinder No infeed conveyor 50 HP Motor

?Cresswood EF-60 Grinder 100 HP 60” Wide Feed Opening Includes 60”W Vibrating Conveyor (shaker table)

2012 Diamond Z DZH6000 with a C-27 1000hp engine with 6,185 hours. Extra parts and screens, service records available. Weight 93,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Diamond Z 6000 Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Diesel, Hours are 6361 Original, Wireless Remote Control, Tri-Axle with Air Brakes, Ready to Grind. Length 44' 1" Width 11' 11" Height 13' 10" Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Diamond Z 1463B Tub Grinder, Frame hours are unknown at this time. 400 hours since 3412 rebuild. Everything runs as it should. Grates supports will need to be address as some point. Weight 98,000 Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

EVASHRED EV60E Dual Shaft Shredder with Infeed ConveyorEvashred is a well-known brand of commercial mobile and stationery shredders for solid waste designed and manufactured by F.V. Evans and Sons also known as Evans Engineering.Every type of shredder is designed specifically to shred a particular type of solid waste including Documents, Car & Truck Tyres, E-scrap (Hard Drives, Computers, Printers known as E-waste and e-scrap), Plastic, Foam rubber, Green Waste, Building Waste even Hospital WasteSpecifications: --30 kW / 40 HP Maximum Power --28-30 RPM Cutter Speed Rotation --Width 640 mm x 37 5mm Cutting Chamber Opening

EXCALIBUR- 1042-60, ...Dual Shaft ShredderSpecifications: -- Motor: 60 HP. -- Opening: 42x 25". -- Cutters: 1 1/8" Wide. --Includes Control Panel -- Includes Stand but no Hopper÷ Loaded onto your Truck.

2022 Fecon Stumpex Stump Grinder..... more info soon, call for details. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25HP -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" --Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand Alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GENSCO 8" DTX 200 ALLIGATOR SHEAR --Blade Length: 8" --Foot pedal control

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP. -- Feed Opening: 62" x 40". -- Dual Shaft with independent Driven Shafts -- Includes: Feed conveyor & discharge conveyor, extra feed hopper; an extra pulley roller that is magnetized for exit end of discharge conveyor (current pulley roller in use is nonmagnetic). -- includes: (2) Service manuals and catwalk structure.