Harvesters and Processors For Sale

2023 Ponsse Ergo 8wd -26 hours on machine -Tracks come with machine 2 sets are new -H8 head Available as a package deal also for the fowarder in pictures(700 hr)

2018 Ponsse Scorpion King Harvester - H7 HEAD Harvester Head with 11,000 hours. Typical weight Scorpion King 49,604 lbs Length 316 in Width 104–112 in Ground clearance 25.8 in Transportation height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor/Harvester H7 head 2 owner 13k hours Complete refurb by Ponsse Currently on the job in use daily 2014 Ponsse Wisent forwarder also available

2007 PONSEE BEAVER 17,000 HOURS H6 HEAD RECENT HEATER FAN RECENT LENGTH SENSOR WOODS READY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH NO PAYMENTS GRANITEHE.COM

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Rottne SMV with Processor Head, RG81 Crane ,Engine Hours Reading 11.000 Hours, Rebuilt Hydraulic Pump, Enclosed Cab with Heat and Air Conditioning, Good Tires, One Set of Tracks Good Centers Operating Weight - 38,580.9 lb Length 31.5ft in Width Over Tires 9.45ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.25ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

12K Hours 561 SP Head New Computer Pre Heater Leveling Rotate Runs Great

2008 H855 Tigercat -All major components have been done -Engine -Pumps -Rotec Bearing Swing Motor -Gearbox New Outer Feed motors -Waratah 622B -20,000 hrs on Carrier -Under 3500 hrs on all major components. -Lots of spare Waratah parts and spare engine.

2018 TIGERCAT 1185 HARVESTER, TH570 HARVESTING HEAD

2018 Tigercat 875 Processor -11909 hours -Waratah HTH623C head -Updated H16 software -Tight and dry machine Work ready

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Tigercat H822C processor with 575 Dangle head, Approx, 10,000 hours, Complete new undercarriage, 1 Owner, Very very Clean, $269,500

2018 Tigercat 1185, 4353 hrs., TC FPT N67 Tier 4F Engine, rated at (230 KW) 308hp, Tigercat Extreme Duty pump drive, trans., and hydraulically balanced bogie axles, $449,500

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

2003 Timbco T425D Log Max 7000 Processor head with 404 bar and chain Approx 15k hours Good UC

Timbco 425D with squirt boom and Waratah 620 processor. Will sell head separately

2006 Timbco 425EXL with Logmax 7000 Processor Head, Hours are 8,000.00 Rebuilt Computer Measuring Device, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 85% No Leaks, Tight Machine. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 TIMBCO 425D HARVESTER/PROCESSOR 14,706 FRAME HOURS 8.3 CUMMINS 80% UNDERCARIAGE PUMPS CHECK OUT OK LOG MAX 7000 GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT IN-HOUSE FINANCING FOR LOW CREDIT GRANITEHE.COM