Frick For Sale
.gif)
3624 Results Found
.jpg?width=220&height=170&mode=crop)
Call for Price
2024 Sawmill World SH300 Air Defect Cut Off Saw with 13' Infeed Conveyor, 10' Outfeed Conveyor, 8" Processing Plank Width, 3" Processing Plank Thickness, 480V 7.5 HP Motor
Call for Price
.jpg?width=300&height=200&mode=pad)
2025 Sawmill World Board Grooving Machine: Grooving Width 2", Grooving Thickness 0.2" to 1", 7hp Motor, Discharge Conveyor Length 60" & Discharge Conveyor Width 16"
Call for Price
2024 Sawmill World Mat Assembly Machine
Schneeberger 9 Sculptor Profile GrinderSwiss Made, Schneeberger Automated High Precision Grinder for Finger Joint, router bits, saw blades, straight and milling Cutters. Specifications: -- Grinding Motor: 1,500 - 3,000 RPM. -- Cooling Pump: 2,800 RPM. -- Grinding Wheel Speed: 3,000 - 6,000 RPM. -- Grinding Wheel Diameter: 50 - 200 mm. Grinding Wheel Bore: 30 mm. -- Cross Travel of Grinding Wheel: 200 mm. Vertical Travel of Grinding Wheel: 400 mm. -- Grinding Head: Swivel-able. -- Worktable Travel: 400 mm. -- Coolant Capacity: 25 liters.Dimensions: 1,226 mm length x 1,160 mm width x 1,180 mm height; Weight - 320 kG.10" Width cap., 11.5" dia., max. profile depth 5.5", radial clearance angle up to 35ø, lateral clearance angle up to 15°Equipped with & Features; -- 2 HP - 1,500 RPM motor, variable grinding speed 2,000 - 4,000 RPM, three-sided full jet cooling. -- All std. grinding equipment for HSS grinding, 1-1/2" spindle arbor, (2) wheel flanges, (1) knife holder, and dresser.
Call for Price
Schurman Gang Saw Infeed Positioner
$ 38,500
Schurman 6TA48 Combination Edger SN: 2121 3 phase 480 volt (2) 200 HP motors
Call for Price
9' Sherman Transfer Deck, 16' wide with H78A roof top chain, gear reduction drive, 16' jump up roll case, (9) 24"x6" rolls
$ 17,250
6"x42" wide overall, includes infeed and outfeed rollers, working condition
Call for Price
SCHURMAN SINGLE ARBOR GANG SAW 6" x 60"
Call for Price
Shurman 6SBA 42 S/N 1171 Gang Edger with 150Hp Motor
$ 64,500
10D G60 thin kerf double arbor schurman gang edger; this item belongs with stock #729, which is also listed in our equipment for sale. Call Jeff at 574-370-5050 for more info.
$ 41,000
Belt, drive system, edger guide system -Call Jeff for more info at 574-370-5050
$ 14,050
Infeed to 10" Schurman gang edger; this item belongs with stock #727, which is also listed in our equipment for sale. - Call Jeff for more info at 574-370-5050
Call for Price
Schutte model 280.100 Hammer Mill Includes: 125 HP Motor - 480v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand
Call for Price
Schutte Hammer Mill #40 S/N 111375-R
Call for Price
Grinder. This machine is a Shutte grinder. With Webster vibratory infeed. Item #C625
Call for Price
Schutte Hammer Mill Horizontal Infeed HZF40 w/100HP Electric Motor and Attached Blower
Call for Price
Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.
Call for Price
Schutte Swing Hammer Grinder
Schutte Pallet Hog - Model 56-35 heavy duty horizontal hog. Features 50 inch wide horizontal feed opening with top and bottom powered rolls; 50 2-way, reversible swinging hammers with hardsurfaced tips ; 250 HP direct drive electric motor; 3/4" thick screen with 1-3/8" diameter holes; Rear discharge. Electrical cabinets included. Hammers are approximately 1-3/4" x 5" x 8". Serial #0506071.
