Logging Equipment For Sale

Omef Forestry Pruner CS200 Forestry pruner for professional use, suitable to prune and chop small and medium trees. Its blade made in special XAR500 anti-ware steel guarantees the best cutting performance. The hight-force generated by the hydraulic cylinder and its 360° rotation system, ensure the maximum flexibility and grip during working operations. It is an attachment for excavator from 3,5 up to 6 tons.

Omef Forestry Pruner CS300

Omef Forestry Pruner CS400 Forestry pruner for excavator for professional use, suitable to prune and chop small and wide trees. Its blade made in special XAR500 anti-ware steel guarantees the best cutting performance. The hight-force generated by the hydraulic cylinder and its 360° rotation system, ensure the maximum flexibility and grip during working operations. It is an attachment for excavator from 10 up to 24 tons.

Omef Forestry Pruner CS400H

24 inch Husqvarna bars brand new never been used. $40 plus shipping. We also have chains that go with them 72LPX084 for $25 each. Also we have 9 of the OR90PX45E for $10 each. If interested text Tim 251-366-3237 Kameron 251-242-5493 Gavin 601-394-7796

2019 Eltec 227 Processor, Equipped with a Ponsse HAHD Processor Head, Undercarriage is a D-7 Caterpillar at 70%, Engine Cummins 9.2 with 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, more pictures coming soon, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This is a chute that came off a 2590 Bandit wood chipper we’re pretty sure. We have welded holes that were worn into it. Asking $500 for the chute. If interested in this chute call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The chute is being sold from our lumberyard, it is located in State Line, Mississippi, 39362, 467 St Peter St.

2002 Peterbilt 377 Log Truck -3406 E certified rebuilt CAT with warranty -Reman transmission 18 speed -2 rebuilt rear ends -All new breaks -Good tires all the way around -2017 Rotobec elite loader

Pitts Pup Trailer Used for 6 months Good rubber Adjustable bunks Like new

2000 Ponssee Cobra HS10 Harvester Cat 3116 125 crane Eberspacher Preheater 700/45-22.5 Tires New batteries Work ready

2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work

2008 Ponsse Buffalo Fowarder -17,400 hours -New boom chains -Re- sealed crane pump -Tracks are new -Recently repainted machine -Owner operated and on a job working

2022 Ponsse Bear Processor -2300+ hrs(working) -H8 head -Tires 95% -Tracks 95% -Tight and dry

2000 Ponsse Bison -Uknown hours -Perkins 6 cylinder diesel -New iQan control system for the crane and steering (100% joystick controls) -New Webasto preheater -Tracks and tire chains included -New Red Dot heat and AC system -Brand new LED lights -Good glass on sides and rear, front isn’t bad but not new -Has a few small leaks but otherwise ready to go to work

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Ponsse Wisent Forwarder 9500 hours 2 owner Nice machine Currently on the job in use daily 2011 Ponsse Ergo processor with H7 head also available

2011 Ponsse Ergo Processor/Harvester H7 head 2 owner 13k hours Complete refurb by Ponsse Currently on the job in use daily 2014 Ponsse Wisent forwarder also available

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Ponsse Buffalo Forwarder, Equipped with a K90 Loader, Mercedes Engine with Only 5600 Hours, Enclosed Cab Heat, Air, Radio, 1 Set of Tracks, All Maintenace records, Synthetic Oil 80 AW Hydraulic Oil, Four Bunks, Slide in and out. Ready for the Woods. More pictures coming soon. Weight 46,297 lbs Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.