Feller Bunchers For Sale

2017 KOMATSU XT-460L FELLER BUNCHER #12475

2016 Komatsu 430 L -6,300 hours -Quadco 22B 360 head -UC 50% -2 idler wheels been done -Few small leaks -Tight machine -Turntable bearing is tight Ready to work

2014 Komatsu 430-2 Feller Buncher, Equipped with a Quadco 22" Saw Head, Enclosed Cab with Heat and Air Conditioning, Cummins 300 HP Engine with ONLY 8,200 Original Hours, New Batteries, Customer Rebuilt Saw Motor at Cost of $12,000.00, Complete Valve Bank and Celluloid Rebuilt. New PM Service all Fluids, Customer took excellent care of the maintenance on the Komatsu, Ready for the Woods. Length 26 ft 10 in Width 10 ft 8 in Height 11 ft 9 in Weight 64,460 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Komatsu 430 Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist, NEW UNDERCARRIAGE, Hours are 8,800, Non Def Engine, Espar Heat, Enclosed Cab with Heat and Air Conditioning, New Swing Bearings, Pump, New Sensor for ICAN, New Starter and Fuel Pump. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu Xt 430-3 Feller Buncher -8900 hours -New UC -Fire suppression redone in march -Rebuilt pumps -Rebuilt rotation manifold -TIght and dry -Quadco 22" head(8900 hours) -360 degree tilt Woods ready

2015 Komatsu XT430-3, 7448 hrs., double grouser style pads @ 75%, rotating can, 2 speed hydrostatic transmission, Quadco 360° rotating head, $239,500

2015 komatsu 430xt-3 with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Madill T2250B Feller Buncher -7900hours -24"Quadco B model head -Engine was done at 7300 Hours -One final drive replaced -Tight and dry

2006 Morbark Timberwolf track cutdown or mowing machine. Rexroth pumps, Cat 3126 diesel, Cat 325 undercarriage (no wear at all). 20” saw head, Capable of 6,500 psi hydraulic pressure. Cab tilts, Machine has a slide boom (for speed), Will cut a swath of 82’ while tracking forward. Dimensions 11’10 wide, 10’ tall, Weight 78,891 lbs. With 20” saw head. 24” pads. Machine has 1485 hours. Two speed drive on tracks. Turtle track will do 360’s without any hesitation. The difference in mowing and felling with slide boom is the elevation of head while retracting boom (twice as fast as hoe). Will not get stuck!

2001 Morbark Wolverine -John Deere engine -20 inch shear head -2 speed hydrostatic -Hydraulic system strong -28-26 Firestone tires at 40 percent tread with chains -Strong running machine

1995 MORBARK WOLVERINE 6300 8,480 HOURS CYCLINDER CUMMINS 18 INCH SHEER RECENT TIRES VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2008 Prentice 2670 Feller Buncher, 13,412 hrs

Prentice 2470 Feller Buncher Believe its a 2007 22" hotsaw Tight and dry 11,000 hours Woods ready

2008 Prentice 2470 Feller Buncher 7200 hours Thinning head hotsaw Disc in good shape 28Ls in good shape Woods ready REDUCED PRICE

Prentice 2190 Track Harvester CAT 6.6 Alert Engine 11,000 hours repairs: New motor, final drives, ECM, wiring harness 16,000 hours repairs: New injectors, injection pump, water pump, measuring system, fuel filter housing, top rollers (All work done by CAT)

2006 RISLEY ECLIPSE EZ2200 TRACKED SAWHEAD CAT 3126 NEW UNDER CARRIAGE QAUDCO HEAD

2016 Tiger Cat 860C -5702 head -Tight and dry -UC is 50% -Boom tight -Needs pads for tracks -One owner machine

Tigercat 5603 Head, 28" Tires, Joystick Steer, AC/Heat

TC 5702 saw 30.5 tires 10235 machine hours, 8317 engine hours

2016 Tigercat 860C Feller Buncher, 22" Saw Head is a Tigercat 5702 with 40-degree lateral Tilt. Only 7500 Hours, Pre DEF Engine, 60 % Undercarriage, Enclosed Cab with Heat and Air Conditioning, Fire Suppression, Non-Leveling Cab Overall Length 17.66ft in Overall Width 10.75ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Tail Swing Radius 4.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.