Feller Bunchers For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 4 of 13
248 Results Found
Sort By 
Recently Added Items
2017 Caterpillar 563D
Call For Price
2017 Caterpillar 563D
2014 Caterpillar 553C
Call For Price
2014 Caterpillar 553C
2021 John Deere 843LII
$155,000
2021 John Deere 843LII
2020 Tigercat 855E
$330,000
2020 Tigercat 855E
$ 58,900

2000 John Deere 608S 6500 hours Good UC Bar saw head Runs and operates good PRICE REDUCED

Mitch Stevens
828-773-6986
Call

$ 455,000

2020 John Deere 859M -2400 hours -2900 intermediate head 360 -Leveling cab -28” pads

Josh Digirolamo
828-302-7264
Call

Call for Price

2018 Deere 853M Feller Buncher Equipped with a FD55 Cutter Head, 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 60%, Repacked Cylinders on Head, 2022 Swivel Bearings Replaced, Serviced Recently Ready for the Woods. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 260,000

2018 John Deere 853M -7200 hours -22in JD 360 degree head -Tight and dry -Uc is good Ready to work!!!

Josh Digirolamo
828-302-7264
Call

$ 49,900

2007 Deere 1010D Forwarder, Engine has14,000.00 Hours, Enclosed Cab with Heat and Air Conditioning. New Starter, and Batteries. Ready For The Woods. Length:24 ft 2 in Width:9 ft 6 in Height:10 ft 6 in Weight:34,630 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Ocala, FL
NEF Equipment
855-251-2648
Call

$ 34,900

John Deere 653E 8360 hours Mid 90s UC good Hotsaw needs a bearing and some welding Machine does run and operate now but head needs a little work

Mitch Stevens
828-773-6986
Call

$ 170,000

2012 John Deere 753J -10717 hours -Brand new sprockets and idlers -New ecm -Oil pan gasket replaced and rear main seal -New Hydraulic pump no hours on it -21" Quadco 360 head

Josh Digirolamo
828-302-7264
Call

$ 349,000

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Sacramento, CA
NEF Equipment
855-251-2648
Call

$ 81,900

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 189,000

2013 Deere 753J Feller Buncher, FR 22 360 Degree Head, Undercarriage 90%, ONLY 6,500 Original Hours, Enclosed Cab with Heat and Air Conditioning, Back up Camera, Fire Suppression. Length: 31 ft 0 in Width: 11 ft 5 in Height: 13 ft 2 in Weight: 53,950 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Erie, PA
NEF Equipment
855-251-2648
Call

$ 315,000

2017 John Deere 853M – 8,917 Hours. STK#25233 $315,000

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

$ 275,000

2016 John Deere 853M – 6,350 Hours. STK#24703 $275,000

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

Call for Price

2012 Deere 753J Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist. New Hydraulic Pump New Oil Pan and sealed Rear Main Seals. New Sprockets , Idler, New Rear Mains, New ECM Computer, Only 11,000 Hours, HEAT AND AC in cab. Ready for the woods. Weight W/O Attachment 50,480 lb Width 10.44ft in Height 11.32ft in Length 11.67ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 269,500

FR22B Saw, 36” triple grouser tri rail, very nice well maintained machine, ready to work.

Forestry First
855-588-7871 ext:1
Call

$ 239,500

2019 John Deere 959m track fellerbuncher with 6500hrs , 360° John Deere hotsaw with 24 inch cut, new motor is 2024. Single grouser tracks that have been corked for extra traction.

 Rocky Mount, VA
Mechanized Solutions LLC
304-494-4830
Call

$ 259,500

Will have new under carriage Fr22b head

 Bridgewater, NH
Michael F Sharp Enterprises
603-252-6689
Call

$ 229,900

2012 John Deere 753J, 9529 hrs., $229,900

 Williamsburg, MI
AIS Equipment Company
231-620-3897
Call

Call for Price

Rolly (Roto Saw) New Engine

 Boonville, NY
C J Logging Equipment Inc
315-942-4756
Call

Call for Price

 Boonville, NY
C J Logging Equipment Inc
315-942-4756
Call

Call for Price

 Boonville, NY
C J Logging Equipment Inc
315-942-4756
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved