Track Feller Bunchers For Sale

2011 John Deere 903K -16000 hours -FD22B head -Uc is at 40% -Tight and dry -Turntable bearing tight

2016 Deere 859M Feller Buncher, Includes a Deere 22" Hotsaw with 40 Degree Tilt, 3,900 Original Hours, One Owner Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Operating Weight 79,510 lb Base Carrier Length 16 ft 1 in Height Over Cab 12 ft 10 in Overall Width 10 ft 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 JOHN DEERE 753J FELLER BUNCHER 13,500 HOURS 1,500 ON FELLING HEAD HEAT AND AC 1 NEW FINAL DRIVE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

2018 John Deere 853M -6566 hours -360 degree head -Disk in good shape -Tight and dry Ready to work

2016 Komatsu 430 L -6,300 hours -Quadco 22B 360 head -UC 50% -2 idler wheels been done -Few small leaks -Tight machine -Turntable bearing is tight Ready to work

QUADCO QFH22B SAWHED (SN: 22B1219) 28" SINGLE GROUSER TRACKS 13' ARM "ESPAR" HEATER AUTOMATIC FIRE SUPPRESSION 14'10" BOOM

2017 KOMATSU XT-460L FELLER BUNCHER #12475

LOCATED IN ALLENWOOD, PA

2016 Komatsu 430 Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist, NEW UNDERCARRIAGE, Hours are 8,800, Non Def Engine, Espar Heat, Enclosed Cab with Heat and Air Conditioning, New Swing Bearings, Pump, New Sensor for ICAN, New Starter and Fuel Pump. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Komatsu 460XTL Feller Buncher , 5800 Hours, Cummins Engine, Quadco 24B Head, Woods Ready

2015 Komatsu Xt 430-3 Feller Buncher -8900 hours -New UC -Fire suppression redone in march -Rebuilt pumps -Rebuilt rotation manifold -TIght and dry -Quadco 22" head(8900 hours) -360 degree tilt Woods ready

2015 Komatsu XT430-3, 7448 hrs., double grouser style pads @ 75%, rotating can, 2 speed hydrostatic transmission, Quadco 360° rotating head, $249,000

One owner, 4400 original hours, excellent maintenance history. Tier-3 engine - NO DEF Quadco Saw 22" with 360 wrist 32" Triple Grouser tracks (24” available)

2014 Komatsu 430-2 Feller Buncher, Equipped with a Quadco 22" Saw Head, Enclosed Cab with Heat and Air Conditioning, Cummins 300 HP Engine with ONLY 8,200 Original Hours, New Batteries, Customer Rebuilt Saw Motor at Cost of $12,000.00, Complete Valve Bank and Celluloid Rebuilt. New PM Service all Fluids, Customer took excellent care of the maintenance on the Komatsu, Ready for the Woods. Length 26 ft 10 in Width 10 ft 8 in Height 11 ft 9 in Weight 64,460 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Madill T2250B Feller Buncher -7900hours -24"Quadco B model head -Engine was done at 7300 Hours -One final drive replaced -Tight and dry

2006 Morbark Timberwolf track cutdown or mowing machine. Rexroth pumps, Cat 3126 diesel, Cat 325 undercarriage (no wear at all). 20” saw head, Capable of 6,500 psi hydraulic pressure. Cab tilts, Machine has a slide boom (for speed), Will cut a swath of 82’ while tracking forward. Dimensions 11’10 wide, 10’ tall, Weight 78,891 lbs. With 20” saw head. 24” pads. Machine has 1485 hours. Two speed drive on tracks. Turtle track will do 360’s without any hesitation. The difference in mowing and felling with slide boom is the elevation of head while retracting boom (twice as fast as hoe). Will not get stuck!

Prentice 2190 Track Harvester CAT 6.6 Alert Engine 11,000 hours repairs: New motor, final drives, ECM, wiring harness 16,000 hours repairs: New injectors, injection pump, water pump, measuring system, fuel filter housing, top rollers (All work done by CAT)

2006 RISLEY ECLIPSE EZ2200 TRACKED SAWHEAD CAT 3126 NEW UNDER CARRIAGE QAUDCO HEAD

2016 Tigercat 860C Feller Buncher, 22" Saw Head is a Tigercat 5702 with 40-degree lateral Tilt. Only 7500 Hours, Pre DEF Engine, 60 % Undercarriage, Enclosed Cab with Heat and Air Conditioning, Fire Suppression, Non-Leveling Cab Overall Length 17.66ft in Overall Width 10.75ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Tail Swing Radius 4.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Tigercat 840 Cutter