Equipment For Sale

Precision 66" 6 Knife Chipper

96" Precision 4K Left Hand Chipper w/ Andritz Turnknife System installed in good shape. Chipper had over $40,000 of parts installed less than year before removal.

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

Precision 25' Incline & 60' Chain that was in Concrete.

Precision Chip Collector Cyclone 60" dia Visit https://benjones.com/shop/102363/ for more information.

66" with 5" disk, 42" pulley, 8 grove, type B

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision Husky Brute 235 Log Loader Self propelled carraige 6BT 5.9 Cummins Joysticks Continuous rotation grapple Runs good

Husky Brute Log Loader Self Propelled No Engine PRICE REDUCED

Husky Brute XL335 Log Loader joysticks delimber hyd hookup for bucksaw fresh paint runs and operates great owned for 12 years priced without bucksaw but saw is also available

5' x 5' Precision Chip Screen

Precision 6 X 6 Chip Screen.

5' x 5' Precision Chip Screen S/N S-396

Includes 27' x 14" dia distribution auger, 3 each 35' x 12" dia loading augers, complete steel structure with columns and beams, control station without starters.

chip cyclone, was used with 6' screen, good working condition

Horizontal feed, fan discharge, 6-knife

24"dia Reckart chip blower and dual loadout chutes, no power, good operating condition

2001 PRECISION HUSKY PROGRIND 1000 TUB GRINDER REDUCED 275 HP New Fixed Teeth New Auger Motors Good Tires Runs Well

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED