Dust Collection Systems For Sale

MURPHY-RODGERS MRZ 17/16L Interior/Open 6 Bag Dust Collector with Auger and Rotary Air Lock General specs: Approx. 7,600 CFM @ 8" SP. (6) top filter bags @ 24" dia. by 72" long. (6) bottom disposable plastic dust storage bags. -- Fan/Motor: 25 HP BALDOR TEFC motor direct driven fan with electrical starter. 17" diameter inlet, with lifting hooks. The bag collector motor is brand new and has never been powered on or fired up. -- Comes with: Main approx. 17" dia trunk line, shut-off, and Quick clamp removal for filter and plastic bags. -- All steel construction with rugged support legs. Air Deflectors allows operator to adjust the air flow and amount of waste evenly into the 6 waste bags. -- Note: NFPA 664 (Fire Code) states that a max. of 5,000 CFM is limit allowed for indoor enclosure-less dust collectors.

MURPHY-RODGERS MRSE-14-RAL Baghouse Dust CollectorSpecifications: 14" Inlet dia., 4,836 CFM, (63) bags with 520 sq. ft. filter area, 9.3:1 air-to-cloth ratio, 20 HP fan motor, primary separator built into unit, secondary separation of fine particles by filter bag section, cone shaped bottom empties into (4) 55-gal. drums. -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with electric shaker as standard; consists of panel box with shaker starter, transformer for 11 5V circuitry, solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.

MURPHY-RODGERS HEC-216-S/10 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust CollectorEquipped with: -- (216) 5" Dia. x 10' L Cloth filter bags. -- (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. -- (3) Front & (2) Side 27" W x 54" H Filter access doors. -- (2) Square cone bottom hoppers, each with 25" x 25" Discharge openings. -- System utilizes (2) 4-1/2’ x 6’ x 4’ H Waste containers (Not included). -- CHICAGO 100 HP - 1,780 RPM Roof-Mounted Blower, with 41” Dia. Inlet. -- Motorized dampers for Winter & Summer modes. -- Winter mode directs air back into building, reducing heat loss. -- Summer mode directs air outside, cooling building, Building door must be open to allow replacement air. -- Electrical controls (As pictured).Complete with: -- Spare Filter Bags.NOTE: Installed Used in 2016 with New 100 HP Motor, New Bearings in Blower, & New Spring Mounts.NOTE: Variable Frequency Drive Needs to be Replaced.

MURPHY-RODGERS MRSE-16-4D Dust CollectorSpecifications: -- 6,600 CFM at 8" W.G. with 20 HP motor and 660 sq. ft. filter area. -- Primary separator built into unit with secondary separation of fine particles by filter bag section. Equipped with; -- Electrical control panel. -- Noise silencer. -- Auto shaker gear drive for filter cleaning. -- Total number filters 80. -- (4) Drum type material storage.

NEDERMAN S-1000 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Available in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 42 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-500 BAG HOUSE DUST COLLECTOR. -- Open Bag house designed for interior application; 5 HP TEFC material fan motor, 1,750 RPM; free standing 2,000 CFM open frame bag house, 162 sq. ft. of filter area via (16) beane material filter bags; 7.5" W.G. static pressure. -- Bottom discharge into (2) plastic waste collection bag. -- Includes: Side-mounted blower assembly with support legs; (2) quick disconnect clamps for the plastic bags. Starter motor with push buttons. Option:42 Gallons Drum Discharge, Single Drum (2 REQUIRED FOR COMPLETE S-500)

NEDERMAN S-750 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 460 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump Bin

16 HP 12 filter bags up 4 collection bags lower Lots of pipe

7.5 HP single phase cyclone/dust collection assorted dust pipe and fittings as pictured

ONEIDA AIR SYSTEMS XXK050346 Cyclone Dust Collector w/ After-filter Plenum. Cyclone & Cartridge Fabric Filtration Dust Collection System for High Pressure CNC applications (need more static pressure for effective cleaning of cutter heads). -- Performance: 2,120 CFM @ 2" SP with Filter. 5 HP US Made BALDOR , Class F, TEFC motor. Magnetic Starter w/ on-off switch and overload protection. -- Fan/Wheel housing: Extremely strong cast aluminum, non-sparking (per NFPA fire code). Efficient Backward Inclined high performance and low noise. No rivets or welds. Fully welded fan housing 11 ga. Motor Housing plate. Includes: -- Cyclone: (8") solid welded inlet with Neutral Vane. Technology reduces filter maintenance. 16-gage cyclone barrel with solid welded construction. Rectangular outlet cam be rotated independent of inlet - 8-bolt patterns. Outlet is 10.03" x 7.64" inside dimensions. Square to round adaptor available. Approx. 26" dia. cyclone housing. -- After-filter plenum for (10) filter bagsDust collector is missing cyclone stand and filter bags. .

ONEIDA AIR SYSTEMS XXK200300 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,800 CFM @ 2.7" SP with 20 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (4) High Efficient Axtar Spun-Bonded Media cartridge after-filters w/ Invrted Plenum. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Fan is welded carbon steel, backward incline, dynamic, two plane balanced. Same as aircraft turbine rotors. -- 16" Rectangular Inlet with square to round inlet adapter. -- Includes: Freestanding Leg Kit with Rotary Airlock, magnetic starter, internal silencer reduces sound to 82 dB @ 10'. EXTENSIVE DUCT WORK IS ALSO AVAILABLEMADE IN THE USA.

ONEIDA AIR SYSTEMS XXK200300 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,800 CFM @ 2.7" SP with 20 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (4) High Efficient Axtar Spun-Bonded Media cartridge after-filters (Optional) for 620 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Fan is welded carbon steel, backward incline, dynamic, two plane balanced. Same as aircraft turbine rotors. -- 16" Rectangular Inlet with square to round inlet adapter. -- Includes: Freestanding Leg Kit with Rotary Airlock, magnetic starter, internal silencer reduces sound to 82 dB @ 10'. Optional Inverted Standard Filter Plenum Assembly with (4) High Efficient Cartridge Filters...Add $7,995MADE IN THE USA.

ONEIDA AIR SYSTEMS FXK041500 Cyclone Dust Collector w/ After-Filter Plenum: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,000 CFM @ 2.7" SP with 15 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (4) High Efficient Izumi Axtar Spunbond Media cartridge after-filters (hanging) for 620 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Fan is welded carbon steel, backward incline, dynamic, two plane balanced. Same as aircraft turbine rotors. -- Inlet size 14" round. outlet 16" round dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, internal silencer reduces sound to 85-87 dB @ 10'Includes Rotary Air-lock for dumping into a waste bin!MADE IN THE USA.

ONEIDA AIR SYSTEMS XXK070323 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 2,900 CFM @ 1.5" SP with 7.5 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (2) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 310 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Impeller is 16.5" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 10" round. outlet 12" round dia. Includes: -- Rotary Air Lock, magnetic starterOptions: -- Freestanding Leg Kit with Dual 55-Gallon steel drum less Rotary Air Lock...as for pricing. MADE IN THE USA.(Actual P/N XXK070323-460-AIR).

ONEIDA AIR SYSTEMS XXK10 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 3,800 CFM @ 2.3" SP with 10 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (3) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 465 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, teflon-like coating to facilitate dust cake release. -- Impeller is 17" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 12" round. outlet 12.5" x 10" square dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, and Rotary Air Lock. MADE IN THE USA..

ONEIDA AIR SYSTEMS SAZ10000C Rotary Air LockONEIDA Air Locks use a high-efficiency helical drive, US-made 0.25 HP hollow shaft gear motor to control the flow of discharge material from the dust collector via a rubber-padded wheel that rotates at a preset speed. The airtight seal with the collector is maintained at all times, ensuring peak airflow performance while waste is continuously deposited into open bins, industrial hoppers, or transfer blower systems.Specifications: -- 10" Dia. flange ideal for use with many of our professional and industrial systems, including the High Vacuum dust collector (with custom clean-out cone). -- US-made 0.25 HP hollow shaft Helical gear motor. -- Impeller Type, welded steel with industrial, replaceable rubber paddles. -- Inlet/outlet 10" round. -- Designed for wood and other non-explosive dust only; not intended for severe duty.

ONEIDA AIR SYSTEMS XXK050346 Cyclone 'High Vacuum' Cartridge Filter Dust Collector w/ One Drum: Cyclone & Cartridge Fabric Filtration Dust Collection System for High Pressure CNC applications (need more static pressure for effective cleaning of cutter heads). -- Performance: 2,120 CFM @ 2" SP with Filter. 5 HP US Made BALDOR , Class F, TEFC motor. Magnetic Starter w/ on-off switch and overload protection. -- Fan/Wheel housing: Extremely strong cast aluminum, non-sparking (per NFPA fire code). Efficient Backward Inclined high performance and low noise. No rivets or welds. Fully welded fan housing 11 ga. Motor Housing plate. -- Cyclone: (8") solid welded inlet with Neutral Vane. Technology reduces filter maintenance. 16-gage cyclone barrel with solid welded construction. Rectangular outlet cam be rotated independent of inlet - 8-bolt patterns. Outlet is 10.03" x 7.64" inside dimensions. Square to round adaptor available. Approx. 26" dia. cyclone housing. -- Efficient Filter Cartridge For 155 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns @ 11 FPM , wide pleated spacing and teflon-like interior coating for easy dust release. Filter size: (1) 18" x 39" & (1) 18: x 19.5". Filter Grounding Wire. -- Includes: Filter Efficiency Gauge. Built-in Silencer reduces sound to 75-81dBA @10' . One 55 Gallon Steel Drum. Top seal cover and flexible connection to cyclone discharge. Angle iron support stand w/leg extensions. -- Dimensions: 31" x 59" x 109.5".Available Options;Bag Gripper, Plastic Bag Hold-Down SystemHoppers / Multiple DrumsBin Level IndicatorRotary AirlockRemote Starter - Radio Frequency - 1 Phase onlyGE HEPA (H-12) Filter Media)Available with 600 Volt motor.

ONEIDA AIR SYSTEMS XXK10 Cyclone Dust Collector w/ After-filter and Drum: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 3,800 CFM @ 2.3" SP with 10 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (3) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 465 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, teflon-like coating to facilitate dust cake release. -- Impeller is 17" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 12" round. outlet 12.5" x 10" square dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, and (1) 55 gal. drum kit for waste collection. MADE IN THE USA..

Peerless Hyd Clam Shell, Bin, fan, pipe, Montgomery hog

Peerless Chip Bin MOD 14