Equipment For Sale

Used, good condition

MDI Metal Detector 19" x 65" Appears new or lightly used

Complete whole log metal detector with conveyor, coil and controls. Handles logs up to 30" diameter.

MDI Metal Detector Mdl CCW-75 w/Search Coil & Chassis S/N 8985

MDI metal detector, built for planer, includes all controls, LIKE NEW CONDITION!

MDI 48" Ring Metal Detector Model CR85, 26"x10' Fiberglass Section

MDI 38" x 5' Fiberglass Section with Sensor & Electronics Box CCW65

MDI Metal Detector and control box.

MDI Metal Detector Nolco fiberglass section 6' x 14"

MDI whole log metal detector, capacity is 30" wide x 28" tall, includes controls, very good condition

MDI Mdl CR85 Metal Detector w/Search Coil & Chassis S/N 0909

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut.Specifications: -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-shaft ready, 2 blades-1 is movable, good working condition

Meadows #2 Sawmill w/ 50’ of track / (2) movable saw vertical edger, husk frame, carriage drive, log turner, mill is complete w/ (2) strand infeed log conveyor, green chain, barn sweep under head saw w/ outside incline stacking section, Detroit 450 KW genset, 150 HP head saw w/ all wire and conduit included, Ref #205

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

#114 • Meadows Sawmill -- Specifications & Features -- Make: Meadows. Serial #: 3D004-98. Power Type: Electric. Power: yes. Manual: no. # of Headblocks: 4. Modular Mill Type: Hydraulic. Blade Size on Husk: 56”. Overall Dimensions: 53' long. Setworks: yes. Setworks Make: 110/Hyd. Automated: yes. Carriage Dimensions: 15’. Log Deck: no. Log Turner: yes. Dust Blower: no. Edger: no. -- Seller Statement -- 43” c-c of track, climate controlled cab. Computerized controls, tung dog, can’t kickers, chain type turner, includes support steel to ground, Rigging Fee $8,000, Does not include the support steel to the ground.

Meadows 4 headblock carriage, Model; #3 DELUXE, 43" center to center wheels, 110 volt over air solenoids, good working condition

Meadows 5 HP Small Blower with Electric Motor