Equipment For Sale

Precision 5x5 Shaker Screen s/n 5-2259, No drive, includes elbow on top

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision 25' Incline & 60' Chain that was in Concrete.

Precision 6 knife chipper and chip-pac, includes Precision 6' x6' shaker screen and cyclone, price includes repainted and gone through shop, good working condition

Precision vibrating conveyor, 18" wide pan x 20' long, 10" tall sides, electric drive, good working condition

Precision vibrating conveyor, 18" wide pan x 27' long, 10" tall sides, electric drive, good working condition

Includes 27' x 14" dia distribution auger, 3 each 35' x 12" dia loading augers, complete steel structure with columns and beams, control station without starters.

Precision 58" 6 Knife Chipper S/N C4173 with Precision 6 X 6 Screen. Never Has Seen Wood

Precision 7 x 7 Chip Screen S/N S-225

58" 6 Knife Precision Chipper

Husky Brute XL335 Log Loader joysticks delimber hyd hookup for bucksaw fresh paint runs and operates great owned for 12 years priced without bucksaw but saw is also available

Precision rosser head debarker, 36" capacity, electric drive on head, self-contained hyd unit for carriage etc., upgraded to chain drive for carriage, has flat barn sweep underneath, working condition

chip cyclone, was used with 6' screen, good working condition

Precision Husky 48” Horizontal Feed, Bottom Discharge, 6-Knife Wastewood Chipper. Case and disc are in very good condition with almost no wear in knife slots. Includes V-belt drive pulley. Spout is 18” X 24” and will handle 24” slab or 11” round wood. Machine weights 5,136 lbs. Shipping size 4ft. 6” wide x 5ft. 4” long x 5ft. high sitting on 4” high blocks. Inventory No. 12319. Price, FOB Portland, OR -------------------------------------------------$12,500.

6 knife, top discharge with heavy-duty base and Gen 3 throat.

1996 model Precision 96" chipper, horizontal feed, bottom discharge, left-hand with 8" thick, 5-knife disk. Includes 2 each 500 HP, 460 volt, 1200 rpm motors, one WEG 500 HP soft start, one AB 500 HP soft start, one GE Panel with 2 each 800 amp disconnect switches, substructure to ground under chipper, pallet of new chipper parts, high volume drag chain 52' long under chipper, 48" wide x 55' long concave belt.

6-knife, top discharge.

Precision 58/60 9 Knife Chipper

66" dia. 6 knife, side/ rear discharge, good working condition

Precision Chip Collector Cyclone 60" dia Visit https://benjones.com/shop/102363/ for more information.