Caterpillar For Sale

2014 Deere 1910E Forwarder, Strong Engine, Has 27,000 Frame Hours, Motor Replaced at 13,000 Hours, Pumps at 7,000 Hours, Drive Motors replaced at 7,000 Hours for Preventative Measures, Slew Bearings and Brass replaced at 9,000 Hours, All Cylinders except Steering Cylinders Replaced at 5,000 Hours ago, Extension Boom and Bucket Replaced Newer Front Window Replaced, New Bucket, Good AC and Heat in Cab.7 New Nokian Tires Replaced the last 4.500 Hours, Boggies, Differential and Planetaries drain clean. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 John Deere 548G3 -12k hours -New glass -Tires have less than 500 hours -Tight and dry -Has a set of good chains -Have a brand-new set will sell for an additional Cost Turn-key Unit!!!!

1986 Deere 648D Skidder. Good Engine Hours Unknown, Winch Arch Cylinder Repacked, Rebuilt Rear End, 24,5 x32 Tires New Tires on Rear, 50% on Front, Door and Glass Replaced, Complete Transmission Rebuilt Ready for the Woods. Length: 22 ft 7 in Width: 11 ft 0 in Height: 9 ft 8 in Weight: 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

John Deere 648G single arch. Arch and grapple available together or separate off of operational machine.

2023 John Deere 1210G,1,575 Hours. STK#25040 $510,000

2018 John Deere 853MH, 7,477 Hours. STK#24704 $300,000

2017 John Deere 853M – 8,917 Hours. STK#25233 $325,00

2016 John Deere 853M – 6,350 Hours. STK#24703 $275,000

2015 John Deere 848L – 9,575 Hours. STK#23981 $85,000

2023 Deere 648LII Dual Arch Grapple Skidder with Winch, 30.5 Rubber with New Bear Paw Chains All Around, New John Deere Complete Engine with Warranty just installed. Clean Machine ready for work.

ROPs

2012 Deere 753J Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist. New Hydraulic Pump New Oil Pan and sealed Rear Main Seals. New Sprockets , Idler, New Rear Mains, New ECM Computer, Only 11,000 Hours, HEAT AND AC in cab. Ready for the woods. Weight W/O Attachment 50,480 lb Width 10.44ft in Height 11.32ft in Length 11.67ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 Deere 548G Skidder with 20,567 hours. Includes winch and blade. Weight:21,740 lbs. Length:20.77 ft Width:9.85 ft Height:9.88 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

John Deere 335C Log loader, brand new hyd pump, rebuilt engine, recent swing motor, cold A/C, saw hook ups, joystick, tight loader, no known leaks, exceptional for what it is $40,000

1999 John Deere 648GII, single arch, rebuilt eng., 4wd, grapple rotates, some movement, some leaks, ready to work, $30,000

2006 John Deere 1010D, 9760hrs., supergrip bucket, preheater, blade, Tire are size 600/65-34 on front 600/55-26.5 on rear, all tires about 60%, inframe done on motor less than 100 hours ago by AIS, Deere Dealer, $89,500

2017 John Deere 1210E, 11,758 hrs., one set of tracks, 6068HT Deere power. CF772 Loader w/single squirt boom, Pre Heater, NO DEF FLUID. 2 speed travel, Tire size is 710/45-26.5 at roughly 80%, $179,500

2014 John Deere 1210E, rotating cab, Heat/AC, Nokian Forest King Tires size 710/45-26.5, all around 70%, preheater, blade, $119,500

2017 John Deere 1210G, 8767 hrs., 2 speed hydrostat trans., Nokian Forest King tires size 710/45-26.5 at roughly 85%, CF 785 crane w/squirt boom, preheater, has IBC technology, DEF, the new drive system installed, $239,500