Cantek Gang Rip Saw For Sale

Gang Rip Saw 

Air Compressor (123) Airlock (18) Band Chopper (2) Band Mill Thin Kerf (39) Band Mills (Wide) (45) Banding-Strapping Machines (117) Blowers and Fans (76) Boiler (12) Carriage (Sawmill) (23) Carriage Drive (Sawmill) (47) Chip Bin (22) Chip Cyclone (13) Chip Screen (35) Chop Saw (36) Circular Saw Husk (6) Circular Sawmill (68) Converyor-Lug Loader (1) Conveyor (53) Conveyor-Auger (6) Conveyor-Live Floor (3) Conveyor-Run-Around (4) Conveyor-Vibrating (43) Conveyors Belt (182) Conveyors Board Dealing (80) Conveyors Decks (Log Lumber) (211) Conveyors General (29) Conveyors-Barn Sweep (21) Conveyors-Live Roll (113) Debarker (68) Dip Tank (7) Drum Dryer (13) Dry Kiln (18) Dump Hopper (11) Dust Collection System (269) Edger Tailing Device (5) Edgers-Board (64) Edgers-Gang (51) Edgers-Slab (4) Edgers-Vertical (3) Electrical (102) Forklift (87) Gang Rip Saw (64) Gang Saw (45) GenSet (43) Hammer Mill (2) Hogs and Wood Grinders (218) Hydraulic Power Pack (51) Knife Grinder (36) Knuckleboom-Stationary (2) Laser Lights (4) Log Home Machinery (7) Log Irrigation (1) Log Merchandising System (8) Log Turner (Sawmill) (26) Lumber Stacker (26) Lumber Sticker (3) Mat Equipment (3) Metal Detector (21) Misc (89) Operator Cab (15) Package Saw (2) Parts and Parts Machines (1) Portable Sawmill (28) Post and Pole Peeler (22) Power Units-Engines (9) Radial Arm Saw (23) Resaw-Band (164) Scanning System (2) Scissor Lift (46) Scragg Mill (37) Screening System (2) Setworks-Sawmill (4) Shaper (1) Sharpening Equipment (90) Shavings Bagger (2) Shavings Mill (15) Slab Saw (2) Stake Pointer (1) Tie Processing (2) Trim Saw (69) Unscrambler (46) Wheel Loader (179) Wood Chipper - Stationary (109) Wrap and Packaging (7)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
6 Results Found
Sort By 
STANDARD LISTINGS
2020 Cantek MRS-340-2  Gang Rip Saw

CANTEK MRS-340-2 Rip Saw Multiblade 4.3" max. thickness with 14" dia. fixed blades(s); 3.3" with 12" fixed blade(s); 4" with 14" moveable blades and 2.95" with 12" moveable blades; 13.4" max. working width between outside saws 25.6: max. 0verall width; 5.5" max. distance to fence from inside fixed blade; 0.59" to 13.38" max. saw travel; 23-1/2" min. stock length; 19.7" possible with optional short stock holddodwn (reduces thickness capacity. -- With 70mm dia. x 13-3/4" long saw arbor powered by a 50 HP motor driving the blades at 3,800 RPM; 3 HP feed motor ;provides feed speeds from 15 to 135 FPM; 1/2 HP lift motor for hold-down roll; infinitely variable saw shifting speeds from .78" to 3.15" per second; (3) 15mw laser lights; (3) 12" or 14" dia. x 90mm bore blades; 72" x 31" tasble size sits 30" from the floor. -- Features include cast iron main frame with main parts enclosed to ensure protection and perfect stability; HD precision straight line caterpillar type feed chain with easily replaceable bolt-in cast steel or Urethane chain ads (optional); fully programmable position sets (10) programs of (10) sets each or infinitely variable foot pedal position set; user friendly Touch Screen control (free standing operators control console) is integrated with 32 bit micro processor and (2) RS232 ports for incredible positioning speeds and EXACT blade positioning. -- Touch Screen with full and easy programming capabilities and joystick control; saw blade positioning is accomplished by industrial series Servo Motor and control; blade speed is infinitely adjustable from .78" to 3.54"/sec. to match all operations; blade positioning can be initiated by electronic joystick control (efficient & quick) or the touch screen controls. -- Equipped to shift (2) saws independently or (2) saws per shifter (optional as a cluster) or with a single or bank of saws with spacers can be set up on the inside of the saw arbor to gang rip if desired. New short sock cutting device included -- Top pressure roll system is electronically positioned from the front control panel for lumber thickness; includes position readout; top roll hold down system is mated to the servo positioning short stock shoe to provide optimum straight line ripping and safety; top rolls are spring tensioned and tension is adjustable (pneumatic pressure is optional). -- Specially designed and Patent Pending Precision Glide Lock with nickel chrome steel saw arbor with super technology for easy maintenance and free saw shifting; (2) shifting saw bushings are equipped with specially designed rollers for most accurate and very fast saw positioning. -- (3) rows of anti-kickback fingers; variable feeding speeds from 16' to 135' FPM inverter motor and speed control with LED readout; electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage load; laser light system including (3) 15mw Lasers is fixed to the inside blade as well as

Jeff Terrill
800-374-5009 ext:349
Call

2020 Cantek MRS-340M-1  Gang Rip Saw

CANTEK MRS-340M-1 GANG RIPSAW WITH (1) SHIFTING BLADE and the following specifications and features: -- Capacities are: 4.3" Max. thickness with 14" dia. fixed blade(s); 3.3" with 12" fixed blade(s); 4" with 14" moveable blades and 2.95" with 12" moveable blades; 13.4" max. working width between outside saws. 25.6" max. overall width; 5.5" max. distance to fence from inside fixed blade; 0.59" to 13.38" max. saw travel; 23-1/2" min. stock length; 19.7" possible with optional short stock holddodwn (reduces thickness capacity. -- With 70 mm dia. x 13-3/4" long saw arbor powered by a 50 HP motor driving the blades at 3,800 RPM; 3 HP feed motor provides feed speeds from 15 to 135 FPM; 1/2 HP lift motor for hold-down roll; infinitely variable saw shifting speeds from 0.78" to 3.15" per second; (2) 15 mW laser lights; (2) 12" or 14" dia. x 90 mm bore blades; 72" x 31" table size sits 30" from the floor. -- Features include cast iron main frame with main parts enclosed to ensure protection and perfect stability; HD precision straight line caterpillar type feed chain with easily replaceable bolt-in cast steel or Urethane chain ads (optional); fully programmable position sets (10) programs of (10) sets each or infinitely variable foot pedal position set; user friendly Touch Screen control (free standing operators control console) is integrated with 32 bit micro processor and (2) RS232 ports for incredible positioning speeds and EXACT blade positioning. -- Touch Screen with full and easy programming capabilities and joystick control; saw blade positioning is accomplished by industrial series Servo Motor and control; blade speed is infinitely adjustable from 0.78" to 3.54" IPS to match all operations; blade positioning can be initiated by electronic joystick control (efficient & quick) or the touch screen controls. -- Equipped to shift (1) saw independently or (2) saws per shifter (optional as a cluster) or with a single or bank of saws with spacers can be set up on the inside of the saw arbor to gang rip if desired. New short stock cutting device included -- Top pressure roll system is electronically positioned from the front control panel for lumber thickness; includes position readout; top roll hold down system is mated to the servo positioning short stock shoe to provide optimum straight line ripping and safety; top rolls are spring tensioned and tension is adjustable (pneumatic pressure is optional). -- Specially designed and Patent Pending Precision Glide Lock with nickel chrome steel saw arbor with super technology for easy maintenance and free saw shifting; (2) shifting saw bushings are equipped with specially designed rollers for most accurate and very fast saw positioning. -- (3) Rows of anti-kickback fingers; variable feeding speeds from 16 to 135 FPM inverter motor and speed control with LED readout; electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage load.

Jeff Terrill
800-374-5009 ext:349
Call

2020 Cantek SYC-300M  Gang Rip Saw

CANTEK-LEADERMAC SYC 300M Heavy Duty Roll Feed Ripsaw: Features & General Description: -- Cast Iron base with easily accessed Anchor Bolts; lift up sound enclosure with light for quieter and safer operation; Hydro-Loc Outboard Bearing System for best gang sawing shaft support, includes grease gun; HD Cardan shaft feed (chainless) drive throughout. -- (6) Full width, close coupled driven top feed rollers; (4) full width driven bed rollers; top rolls are air tensioned; variable pressure controls on top feed rolls; motorized lift to top rolls; infeed table is hard chromed with approx. 0.012” - 0.014” chrome. -- Easily adjusted roll holdover on the infeed table; saw spindle has motorized lift and lowering; multiple HD V-belt driven saw spindle with special HD belt tensioner; saw blades cut from below, hence better dust removal and a heavier sturdier design. -- Saws are pre-mounted on a slip-on sleeve for quick change; (3) sets of anti-kickback devices included; central lube system; pneumatic pressure controller safety switch – if air pressure to the top rolls drops below the set to run level, the feed will automatically stop. -- Controls include: VFD Control to feed speeds and Digital Speed Readout in FPM or MPM; TECO-WESTINGHOUSE main electric motor; I.E.C. – TELEMECANIQUE-SQUARE-D Electricals meet or exceed UL/CSA Standards. -- Machine is equipped with WYE-DELTA Soft-Start (low Amperage) starters & main disconnect, multiple “E-Stops" operate at low amperageSPECIFICATIONS: -- Max. thickness, 5.1” (130 mm); Note – to 4-1/2” with std. 14” diameter blades; to 5.1” with optional 16” Blades. -- Saw sleeve usable length of 12.3” (312 mm) - max. dist. between outside saws; minimum length material, 10” (250 mm) – at slower speeds. -- Saw Blades with 10” min. to 14” max dia. x 70 mm Bore (double key), 16” (400 mm) optional – no charge; Saw spindle with 50 mm dia. runs at 3,200 RPM; Saw sleeve – included, 70 mm OD with double keyways. - Includes (1) set of spacers. -- Main Motor – 75 HP (50, 60, or 100 HP optional); top feed rolls – rise & fall, 1 HP; Feed Drive of 7.5 HP with VFD infinitely variable speed control, 20 to 165 FPM (6 to 50 MPM) to 200 FPM – 60 MPM – optional). -- (4) 150 mm Dust collection outlets; approx. weight – net, 5,060 Lbs.; WYE-DELTA – low Amperage - Soft Start for main motor starter; electrics to UL/CSA Standards and wired to 230/460 or 575/3/60. - Note: Stock machines are with 50 HP – 460/3/60 electrics machine and can be easily and inexpensively transformed to other voltages.Optional Extras. -- 75 KVA Auto Transformer to run machine on 230/3/60 electrics, please add ...$ 2,045. -- 16” (400 mm) Dia. blade with 5.1” max. Thickness N/C; NOTE: – Contact us to see if stock machine has this capacity. -- Extra Saw Sleeve, add ...$ 995. -- Additional Sets o

Jeff Terrill
800-374-5009 ext:349
Call

2020 Cantek MRS-300A  Gang Rip Saw

CANTEK MRS 300 Multi Blade (Gang) Rip Saw: General Description: -- Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability. -- Straight line caterpillar style feeding with heavy guided chain. Chain blocks are special cast iron with heat treated & precision ground pins. -- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve.Features & Includes: -- (3) Sets of Anti-Kickback Fingers (2) top, (1) bottom. -- Powered Rise & Fall to the pressure rollers. -- New style round Fence Bar support with quick shift long fence. -- Automatic Centralized lubrication system. -- Automatic Star-Delta Starter (slow speed start) and low voltage controls. -- C.E style European guard & safety features. -- Long fence for control of long material. -- Electrics to 230/460 or 575 Volts, 3-Phase, 60 Cycles.Specifications: -- Max. Working Thickness, 4 5/8” (120 mm) with 15” Blade diameter. -- Min. Length, 20” standard or 12" with short stock attachment. -- Saw Sleeve Usable Length(between outside saws), 12" (305 mm). -- Sawblade Dia., 200 to 350 mm (8” to 14”). -- Saw arbor Sleeve OD (Diameter), 70 mm; Saw arbor diameter, 50 mm. -- Saw arbor vertical adjustment, 3.6” (90 mm).Equipped with: -- 50 HP Saw Motor – Saw Arbor Speed 3,800 RPM. -- Powered Pressure Rollers (Rise/Fall), 1/2 HP motor. -- Feed Speeds 25 - 100 FPM (8 - 39 MPM); Feed Motor with 2 HP drive. -- (2) 6” Dia. Dust Hood. -- Table Size, 30” x 60"; Table Height from floor 33.5".Other Information: -- Net Weight, 4,510 Lbs, Shipping Weight, 5,060 Lbs - Machine Dimensions, 82.68” 59” x 56.5", Shipping dimensions, 71” x 67” x 63”. -- Included: (1) Removable saw sleeve, (1) Set of (38) spacers; NOTE: Saw blades not included.Optional Extras: -- Short Stock & Thin material cutting attachment, 12" (300 mm) min. length & 3.75" (95 mm) max. thickness (can be added and/or used at any time), required for high accuracy cutting, ...$ 595. -- 20MW Laser (FP MLC1320W) & Laser Holder with 6” Bolt on Base Stand, ...$ 595.00. -- Single Blade Mechanical Quick Lock Collars that can be used on the 70 mm sleeve for individual blade quick setting and locking process (no spacers required) – This is desirable especially if you have to quick change from size to size and you don’t have the spacers to run a special size of product, (each) ...$ 180. -- Spare saw sleeve ...$ 370 -- Set (38) of spacing collars ...$ 360. -- 75 KVA Auto Transformer for 230 Volt operation, $1.950.

Jeff Terrill
800-374-5009 ext:349
Call

2020 Cantek MRS-610M-4  Gang Rip Saw

CANTEK MODEL MRS-610M-4 GANG RIPSAW WITH (4) SHIFTING BLADES: -- (4) Shifting Blades and 4.2" Max. cutting thickness without pressure plate, 3.7" with pressure plate; 24" Max. cutting width; 35.4" Max. material width of pass-through; 60 HP Saw motor (larger optional); 2.8" (70mm) Saw arbor diameter turning at 3800 RPM; 12" Min. or 14" max. Sawblade diameter; 2.8" (70mm) Sawblade bore when mounted directly on shaft, 3.5" (90mm) when mounted on saw sleeve; 5 HP feed motor with variable feed speeds from 25 to 200 FPM; 1/2 HP pressure roller raising motor; 24" Min. stock length; 31.9" Min. stock length with board under (2) rollers. -- FEATURES AND BENEFITS: -- The main frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stability -- Nickel chrome steel saw arbor with 70 mm OD double keyed quick removal sleeve -- Heavy duty precision straight line feeding caterpillar chain type -- Feed chain with easily replaceable bolt in cast steel or urethane pads - optional -- The top pressure roller system is electronically positioned from the front control panel with regards to lumber thickness with position readout. -- Top roller hold down system is mated to the servo positioning short stock shoe providing optimum straight line ripping performance and comprehensive safety. -- Pneumatic pressure (infinitely variable) to the holddown feed rollers provides better control of the lumber -- Nickel chrome steel saw arbor -- Variable feed speeds of 16'-200' min. (5-60m/min) via an inverter motor and speed control with led readout -- Electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage load -- New - short stock cutting device included -- Digitally controlled lubricator for chain -- Centralized lubrication system -- (2) Powered top & bottom outfeed rollers are a standard feature. The powered roll system facilitates positive flow of the stock through the gang saw and onto outfeed conveyors or transfers -- (3) Rows of anti-kickback fingers -- Telemechanique - automatic star-delta starter (low amperage soft-start) and low voltage controls -- Controls are mounted on the saw for easy convenient machine operation -- Includes 12' infeed table -- Gang saw sleeve is optional extra -- Electrics to 230/460 or 575-volt, 3-phase, 60-cycle to UL/CSA standards -- Complete Shifting Fence Infeed Tables and complete Outfeed Sweep Systems, handling decks and Stacking Systems are available. -- Options available: -- Add for 75 Hp Saw arbor motor in lieu of 60 HP - including Wye-Delta low amp Starter -- 100 HP Saw arbor motor in lieu of 60 HP - including Wye-Delta low amp Starter -- 125 HP Saw arbor motor in lieu of 60 HP - including Wye-Delta low amp Starter -- Short Stock Feeding device (min. length 12" - must use 12 blades for max. thickness of cut of 2.16" (55mm) -- 20MW Laser (FP MLC1320W) & Laser Holder w/12" Bolt on Base-Stand -- As above but w

Jeff Terrill
800-374-5009 ext:349
Call

2020 Cantek MRS-175  Gang Rip Saw

CANTEK MODEL MRS-175 6.9” THICK CUTTING HEAVY-DUTY GANG RIPSAW: -- FEATURES: -- Massive cast iron base provides incredible absorption characteristics for high quality deep cutting operations -- Precision chain and rails (dip chain) system facilitates straight line cutting -- Equipped with a blade mist cooling device providing cooling and cleaning for sawblades during cutting increasing blade life and improved cut quality. -- Motorized saw arbor and thickness adjustment for operator convenience. -- Specially designed auxiliary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood. -- A digitally controller lubrication unit is provided to provide consistent oil protection to the feed chain and guide rails. If the oil level drops below a safe level a warning lamp will light up and the feed chain will stop automatically. -- Equipped with an electronic amperage display which is tied in to an overload protection where if the saw motor exceeds a rated amperage the feed chain slows down automatically. This prevents the potential damaged to the saw arbor and/or blades and also prolongs blade life up to 20%. -- Variable feed speed adjustment by frequency inverter from the front of the machine. -- SPECIFICATIONS -- Max. cutting thickness, 6.9” -- Max. cutting width, 13-3/4” -- Fixed inside blade to column, 14.9” -- Min. working length, 27-1/2” -- Max. saw blade diameter, 14” to 18” -- Sawblade bore, 70 mm or 90mm – double keyed -- Saw arbor diameter, 70 mm without sleeve - 90mm with sleeve -- Saw arbor speed, 2500 RPM -- Saw arbor motor, 125 HP (150 HP optional) -- Saw arbor elevation motor, 1/2 HP -- Feed motor, 3 HP (5HP optional) -- Variable feed speed, 8 – 80 FPM (higher speed optional) -- Powered raise & lower of rolls, 1/2 HP -- Dust hood dia., 8” -- Table height (pass line), 29.3” -- Electrics – to UL/CSA standards 230/460 or 575-volt, 3-phase, 60-cycle -- Table area (L x W), 72.4” x 31.1” -- Overall dimensions (L x W x H), 95.5” x 90.5” x 63”, Net weight 6,600 lbs. -- OPTIONAL EQUIPMENT: -- 150 HP Main Motor in lieu of 125 HP -- 90mm OD Saw Sleeve for above Saw -- Laser Light, 20mw with Mounting Bracket -- Saw Blade dia. 16” + 6 Wiper for ripping 6" (155mm)6 high --Saw Blade dia. 18” + 6 Wiper for ripping 6-3/4" (170mm high) -- Sleeve Support Unit for Unloading/Loading Sleeve & Blades

Jeff Terrill
800-374-5009 ext:349
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved