Equipment For Sale

High Tech 20' Trim Saw (10) Blades

High Point 12" Resaw with Return Conveyor

Single Head Horizontal Band Re-saw System Model : HP-11P-SMART • Single saw head configuration. • Motor powered set works for accurate saw wheel elevation. • Digital position controller permits accurate saw wheel height positioning. • Automatic blade tension is controlled by hydraulic cylinder. • Variable feed speed by hydraulic motor drive. • The big pressure roller is air cylinder loaded to hold wood down firmly. Specifications HP- 11P-SMART 1. Saves Time and labor costs 2. Pneumatic pressure roller infeed 3. Digital position controller permits accurate saw wheel height 4. Easy to operate and set up Feed speed: 4-27m/min (13-90FPM) Max. cutting height: 250mm (10”) Max. cutting width: 300mm (11 3/4”) Min. workpiece length: 400mm; 205mm with extension set Max. workpiece length: 580mm Distance from blade to conveyor: 4-125mm Saw wheel Diameter: 711.5mm (28”) Saw wheel width: 22.7mm (1”) Saw blade size: 4265 x 27mm (168” x 1’) Blade speed: 2816m/min (9240FPM) Saw Motor: 15kW(20HP) Feed unit: 0.75kW(2HP) gearbox motor with frequency converter Cooling system Oil mist Blade tensioning Hydraulic system Motor for blade positioning: 0.18kW(1/4HP) Dust post: Ø4” x 4 Table height: 902.5mm Machine weight: 951kgs Machine dimensions: 2835 x 2052 x 1678mm (LxWxH)

Hildebrand

Conveyor system with automatic sensors.. approximately 600-800 ft with all motors and accessories..

18" Pads, 24" Bucket, Blade, Cab w/ AC, Long Arm, Medium-Long Arm, Standard Boom, Standard Track

28" Pads, 42" Bucket, Aux Hydraulics, Cab w/ AC, Hydraulic Thumb, Medium Arm, Standard Boom, Standard Track

2001 Hitachi LX200 Excavator, Engine has 6,200 Hours, Enclosed Cab with Heat and Air Conditioning, Quick Connect, 42" Bucket, Undercarriage 55-60%... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Hitachi EH3500 ACII Dump Truck WITH 6,898.7 hours on a Cummins QSK 50 Engine. Enclosed Cab with heat and AC. Very good condition, was assembled new and put in service for the first time in October 2022. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Hitachi ZX250LC5 4280 HOURS CAB A/C LONG ARM 28"SB PADS AUX LINES

16" Pads, 24" Bucket, Blade, Cab w/ AC, Long Arm, Standard Track, Variable Boom

HMC Two saw trimmer, Model ET10: Operator on left; NO electric setworks--manually operated hydraulic valve type; standard 10HP electric motors on saw blade; standard hydraulic system; NO belt conveyor. Offered as-is/where-is with no warranty or guaranty, as removed from service.

rosser head style, all hyd. drive, 36" dia. log capacity x 12' long, very good condition

HMC MDS50 Drop Saw Trimmer s/n 076-00

HMC 50-DBES S/N AC50BD695-02 3 Hbd Carriage, 5x8 Cab, Mudata Scanner/Setworks, 55' Track

This mill is ready to be removed from the current location. - 4 Roll Cases 24’’ 2 center 6.5 Diameter 45’ 56’ 62’ 70’HMC All motor controls included - 7 Lumber Decks Flat Chains 10’ 12’ 16’ 20’ 24’ 40’ 82’ 5 Chains WIDC All motor controls included - 2 Log Decks - 28’ Long 12’wide 3 chains stop loader - 14’ long 12’ wide 4 chains stop loader - All motor controls included - Newman Trimmer, drop saws, scrap belt chain 100’x 24’ - Unscrambler 16’wide x 5’high 8 chains - Air Compressor Model SSREP100 HP - Air Dryer storage tank - HMC Model mm10 4 heah block carriage 49’ - HMC Saw Booth - HMC Feed Works - HMC Husk 54’ bottom saw 36’ top saw - 200 HP motor - HMC Log Turner - HMC Drop Belt Live Off Barrer - 10 Headrig saws inserted tooth 54” - Roof Top Chain 10ft 5 Chain - Blower system - Tie-Cant Deck 62’Lx13’ W 4 chain all motors & Controls - Roof Top Lumber Deck 30’L x 13’W 5 chains all motors & Controls

HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" dia bottom blade and 36" dia top saw, includes complete mill package including 42" chain Log Turner (Sawmill) and nose skids, working condition

HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp carriage drive, air powered dogs, 40' long track, was used with band head, includes cab, controls and log turner, complete unit ready to operate and in good condition

HMC 4800 horizontal resaw. This saw is made by Pinheiro for HMC, quality and speed 4" -5” band, includes. New electronic setworks, (no conveyors), excellent stand alone machine, Great for relcaiming Slabs (ref #200)

HMC AC 50 BD Modular Circle Sawmill with Top Saw, 3 Head Block Carriage, 50HP Carriage Drive, 55' Track, Cab & Controls S/N 551-93