Bliss Industries For Sale

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-shaft ready, 2 blades-1 is movable, good working condition

Meadows edger 4" thick x 36" wide capacity, infeed/ outfeed, 1 movable-1 stationary blade, includes BRAND NEW blades and collars, comes with sawdust blower, recently in production and in good working condition

This used 3 Blade Meadows Edger by Meadows Mills is a reliable piece of equipment ideal for sawmills. It features a 4" x 36" cutting capacity, making it suitable for processing various board sizes with precision. The edger is belt-driven, ensuring smooth and efficient operation. It is currently in working condition, offering a cost-effective solution for wood processing tasks. This edger provides essential functionality for any sawmill operation, effectively optimizing the preparation of boards for further processing.

MEADOWS MILLS 120H Chain Log TurnerSpecifications: -- Hydraulic Cylinders: Two 2" x 12" with 1-1/2" diameter rod -- Turning Chain: #120 chain with 1" dog width and 13 bits -- Drive: H80TB13 sprocket with bushing, 80Q25 sprocket with bushing, #80 drive chain, and chain guard -- Drive Shaft: 2-3/16" diameter 1018 cold roll -- Idler Shaft: 2-3/16" diameter 1018 cold roll. Construction: -- Frame: Base constructed from 10" x 25.4 Lbs beam, feet constructed from 4" x 6" tubing, head frame: Constructed from 8" x 3" x 4" tubing -- Drive Motor: Charlyn 104-1253 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 12 GPM & 950 PSI -- Controls: not included in the base price

MEADOWS MILLS 100H CHAIN LOG TURNER -- Hydraulic Cylinders: One 2" x 12" with 1 1/2" rod -- Turning Chain: #100 chain with 3/4" dog width and 13 bits -- Drive: H60TB13 sprocket with bushing, H60SDS25 sprocket with bushing, #60 drive chain, and chain guard -- Drive Shaft: 1 11/16" diameter 1018 cold roll -- Idler Shaft: 1 11/16" diameter 1018 cold roll -- Frame: Base constructed from 3" x 4" tubing, uprights constructed from 8" channel and 4" channel, head frame constructed from 3" x 4" x 3/8" angle and various flat bar -- Drive Motor: Charlyn 103-1032 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 10 gpm & 950 psi -- Controls: not included in base price

MEADOWS MILLS 2-STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 3 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 4 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 2 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 3 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

Meadows #2, 3 head block automatic Sawmill, 2 blade vertical edger, 3 saws 2-54", 1-52". All B style. 18" wood hog, 3 conveyers, Genset 350 KW. Cut off with conveyer, Dead rolls, Fuel Tank, 3 strand live deck, Meadows log turner, all electric components included, 3 sawdust blowers. $80,000

6" X 54" MEADOWS "TITAN" Combination gang-edger with 100HP drive motor, 5 saws on gang side and 18" edger side movement. Door on right. Laser movement. 48" roll width infeed and push button controls. 20 HP hydraulic system. Outfeed belt, 14' long. Very good condition. Price:  $45,000.00

Meadows Mills Spartan 6" Edger Gang

Meadows Gang Edger

Meadows Mills 6” Spartan Gang/Edger

Meadows Trojan 36" x 7" Fixed Arbor Gang Saw w/75hp Motor, 8' Gravity Roll Infeed with Powered Cant Positioner, Laser Light System with 6 Laser Lights & 36" x 13' 6" Powered Outfeed

Meadows 4 headblock carriage, Model; #3 DELUXE, good working condition

The Model 120H log turner utilizes two (2) 2 inch by 12 inch hydraulic cylinders with 1 1/2 inch bores to lift its head. The log turner chain comes standard with 13 teeth that are 1 inch wide. The head is chain driven by a Char-lyn 104-1253 hydraulic motor (included). The drive includes a 13 teeth and 25 teeth sprocket and number 80 chain with chain guard included. Controls, not included, with hoses sell for $2,490.00. 20 GPM Hydraulic power sources, not included, sell for $7,320.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.

Meadows Chain Turner