Bliss Industries For Sale
.gif)
3592 Results Found
7.5 HP 220/440 volt 3-phase wired 220 volt 10” dust inlet Total filter serface 261 sq. Ft. 99.9% effective at .2-2.0 microns 3468 cfm @4.3” static pressure
Call for Price
Grizzly G0919 12" 2 Head Resaw
Call for Price
$ 10,500
Gruber Systems 12’ Vibration Conveyor Tables with 230V 3 Phase Vibrators Seven Available. Six with Vibrators and one without. These powerful 3-phase electric vibrator-equipped Vibe Tables offer heavy-duty performance, quieter operation, and lower compressed air volume requirements compared to pneumatic vibrator equipped tables. Specifications: Frame: Height (to top of wheelway): - 28” (71.12 cm) Width - 24” (61 cm) Length - 120” - 144” (304.8 - 365.76 cm) Wheelway (wheel center to wheel center): Width - 20-1/8” (51.12 cm) Pneumatic Vibrator (@20 psi): PSI required to Start - 25 PSI (1.75 kg/cm²) Vibrations Per Minute (VPM) - 3,200 Force - 255 lb-force (115.6 kg-force) Flow - 9 CFM (0.25 m³/minute) Electric Vibrator (220/440 volt, 3Ø, 60hz. @ 10% setting) Vibrations per Minute - 3,456 VPM Pounds of force - 230 LB Full load current - 1.26 / .69 Amps Starting current - 9.8 / 4.9 Amps
Call for Price
Call for Price
Gruendler 50XD Wood Hog Pkg, s/n 21419, built in 1972, 59" wide x 73" across-the-shaft top infeed opening, bottom discharge, with estimated 2" to 3" square hole screen grates, mounted on steel subbase for direct coupling 350hp 885rpm 575vac motor with Falk coupling. Includes magnetic separation system.
$ 2,500
.jpg?width=300&height=200&mode=pad)
Grutter Pop Up Saw 18" Blade. 10hp Motor. Located in MI. #C964
Call for Price
Grutter Birdsmouth Rafter Saw
Call for Price
Grutter Dato Blade Windstop Machine with (2) 10HP Motors & 3/4HP Gearbox
Call for Price
Grutter End Groover with 10HP Motor and control Box
Call for Price
Grutter Tongue Remover with 15HP Motor
Call for Price
Grutter Window Splay with 5.5HP Motor and Grutter Cable Saw.
GS - HEAVY-DUTY 34 KVA, ...Transformer.SCR Drive Transformer. -- Cat # DT631H34S. -- High voltage 575 Volts Delta; Low voltage 230 Y/133.
Call for Price
GSM Dust Blower with 100HP Motor, 50" Dia. Fan Blade, 23" Inlet & Outlet Serial#1347
Call for Price
Hahnel with 23" inlet
Call for Price
Hammer Multi Duplex 400LJ Grinder ready to load!
HAMMOND DK-1055-B Cyclone Dust Collector w/ After-FilterSelf-contained indoor cyclone type unit w/afterfilter bags, the blower wheel is located on the clean air side and is direct driven by 7.5 HP motor @ 3,600 RPM, performance ranges 3,470 CFM @ 5" H20, 2,727 CFM @ 8.6" H20, 2,200 CFM @ 11.4" H20. -- (1) 10" Dia. inlet and (1) 8.5" x 15" outlet; waste discharges via bottom of unit to (2) 55-gal. drums (drums not included). -- Includes: Multi-exhaust manifold with (4) after-filter bags, 167 sq. ft. cloth area, push button starter.
Call for Price
Call for Price
Hanchett 104 HD Stretcher Roller S/N 74C
HANCHETT NUMBER 104-C-72 HEAVY DUTY FLOOR MODEL CIRCULAR SAW STRETCHER ROLL with fully supported rolls and anti-friction bearings on shafts and screw, for saws to 72” diameter, complete with gear-head motor and starter, and remote control for saw centering. Includes attachment for smaller saws, excellent shape ref # 184, contact Amy for more information (928)723-9449
