Bliss Industries For Sale

Band Mills (Wide) (45) Band Mills (Thin Kerf) (48) Debarkers (88) Edger-Boards (59) Forklifts (45) Gang Saws (57) Hogs and Wood Grinders (220) Log Loaders (2) Portable Sawmills (15) Resaws-Band (189) Scragg Mills (45) Trim Saws (84) Unscramblers (29) Wheel Loaders (52) Wood Chippers - Stationary (141)
Air Compressors (141) Airlocks (28) Banding-Strapping Machines (92) Blowers and Fans (125) Boilers (26) Bolter Saws (1) Carriages (Sawmill) (27) Carriage Drives (Sawmill) (57) Chip Bins (16) Chip Cyclones (24) Chip Screens (40) Chipping Canters (5) Chop Saws (65) Circular Saw Husks (9) Circular Sawmills (73) Conveyors (89) Conveyors Board Dealing (79) Conveyors Deck (Log Lumber) (202) Conveyors General (58) Conveyors-Auger (4) Conveyors-Live Floor (9) Conveyors-Run-Around (4) Conveyors-Vibrating (52) Conveyors Belts (195) Conveyors-Barn Sweep (24) Conveyors-Live Roll (116) Dip Tanks (4) Drum Dryers (25) Dry Kilns (48) Dump Hoppers (8) Dust Collection Systems (257) Edger Tailing Devices (6) Edgers-Gang (47) Edgers-Slab (6) Edgers-Vertical (4) Electrical (147) Gang Rip Saws (120) GenSets (24) Hammer Mills (7) Hydraulic Power Packs (98) Knife Grinders (28) Laser Lights (5) Log Home Machinery (15) Log Merchandising Systems (12) Log Turners (Sawmill) (36) Lumber Carts (20) Lumber Sorters (10) Lumber Stackers (24) Lumber Stickers (1) Magnetic Separators (2) Mat Equipment (3) Metal Detectors (40) Misc (94) Operator Cabs (30) Package Saws (4) Parts and Parts Machines (10) Plywood OSB and Panel Boards (4) Post and Pole Peelers (18) Power Units-Engines (5) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (55) Screening Systems (9) Setworks - Sawmill (7) Shapers (1) Sharpening Equipment (126) Shavings Mills (16) Slab Saws (6) Step Feeders (1) Straight Line Rips (2) Tie Processings (3) Tilt Hoists (15) Wrap and Packaging (8)

Filtering

Reset All 

thru
 Used     New
Viewing Page 41 of 184
3679 Results Found
Sort By 
Recently Added Items
Unknown
$2,500
Unknown
Iseli Serial number 51479
$7,500
Iseli Serial number 51479
Armstrong Serial number 20305
$11,500
Armstrong Serial number 20305
Armstrong
$4,000
Armstrong
Call for Price

EXTREMA DCF-05 Bag Filter. -- Features a 16" inlet; unit has (5) sections, (5) 1 micron filter bags with (5) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

EXTREMA DCY-750.3 TYPHOON Cyclone Dust CollectorCyclone & fabric filtration dust collection system. -- Powerful two-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock (included), allowing you to choose the disposal system, before passing finer particals through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM with 7.5 HP Induction motor with 12" inlet. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Standard support frame to allow use with a waste hopper under the cyclone.

Bernie Straple
800-374-5009 ext:339
Call

$ 8,999

EXTREMA DCY-1000 TYPHOON Cyclone Dust Collector. Cyclone & fabric filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock with 10 CFM capacity, allowing you to choose the disposal system, before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags; air volume output rated @ 6,400 CFM. -- Equipped with: 10 HP Induction motor, 16" steel blower fan impeller and is dynamically balanced and 12" inlet. -- Includes: Collection bag snap-in ring for easy addition or removal of plastic bag; filter bags filter dust particles down to (1) Micron in size; low noise operation. -- Supplied with: Heavy Duty support frame to allow usage with a waste hopper under the Cyclone.

Bernie Straple
800-374-5009 ext:339
Call

$ 1,999

EXTREMA DB-50.3 TYPHOON BLOWER. Capacity 5 HP, 3,200 CFM. -- Solid heavy gauge steel construction. -- Heavy duty dynamically balanced steel impeller, 10" inlet, 13" impeller, 12" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. - Complete with magnetic starter. -- Note: 460 Volt available

Bernie Straple
800-374-5009 ext:339
Call

$ 4,599

EXTREMA DC-3075.1 TYPHOON Fabric Filtration Modular Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 4,550 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 7.5 HP motor with push button control and motor starter. -- 13.5" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit.

Bernie Straple
800-374-5009 ext:339
Call

$ 9,999

EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".

Bernie Straple
800-374-5009 ext:339
Call

$ 2,799

EXTREMA DB-75 TYPHOON BLOWER. Capacity 7.5 HP motor and rated at 4,700 CFM. -- Solid heavy gauge steel construction. -- Heavy duty 13.5" dia. dynamically balanced steel impeller. -- 12" Inlet, 13.5" impeller, 14" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. -- Complete with magnetic starter. -- Note: 460 Volt available

Bernie Straple
800-374-5009 ext:339
Call

$ 6,999

EXTREMA DCF-327E Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- Available for outdoor & indoor use; unit is enclosed. -- Excellent addition to the "DCY Typhoon" Dust Collector; ...ask us why!

Bernie Straple
800-374-5009 ext:339
Call

$ 4,398

EXTREMA DC-250.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (1) Fabric filter bag placed above plastic collection bag. -- 2,975 CFM rated output. -- 5 HP Induction motor. -- 14-1/4" Steel blower fan impeller is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bag filters dust particles down to (1) Micron in size. -- Low noise operation. Includes: Sturdy steel tripod cyclone mounting stand. Drum dollie (drum not included).

Bernie Straple
800-374-5009 ext:339
Call

$ 5,299

EXTREMA DC-275.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM. -- 7.5 HP Induction motor. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Sturdy steel tripod cyclone mounting stand and drum dolly. (drum not included).

Bernie Straple
800-374-5009 ext:339
Call

$ 600

FALK gear reducer: 13:1 ratio; 52 HP. Price $600.00. As-is/where-is. (Inv. # G-10).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 850

FALK gear reducer: 25:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-1).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 850

FALK gear reducer: 40:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-5).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 950

FALK gear reducer: 40:1 ratio; 10 HP. Price $950.00. As-is/where-is. (Inv. # G-6).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 600

FALK gear reducer: 8:1 ratio; 15 HP. Price $600.00. As-is/where-is. (Inv. # G-4)

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

Call for Price

FARR GOLD GS4 DUST/FUME/MATERIAL COLLECTOR: 3,000 CFM Rated cap., 1,300 sq. ft. filter area from (4) cartridge filters, approx. 2.3:1 air: cloth ratio . -- Equipped with: 5 HP Pull thru motor; dirty air is pulled into the filter area at bottom of filter media section allowing gross dust particles to fall into collector barrels located beneath pyramidal hopper discharging to a sealed drum (not included) -- Fine dust is pulled up thru the cartridge filters; dust filter cartridges are cleaned by automatic pulse jet with minimum compressed air consumption; cleaned air continues thru blower and is returned to the building air supply thru a silencer.. -- Includes: Cyclone with slide gate discharging into a sealed barrel (not included), electrical control panel, support stand with clearance under hopper, discharge for a waste bin,. access door, some pipe as pictured.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

FARR GOLD - GS4, ...Dust/Fume/Material Collector: 3,000 CFM Rated cap., 1,300 sq./ft. filter area from (4) cartridge filters, approx. 2.3:1 air: cloth ratio. -- Equipped with: 5 HP Pull through motor; dirty air is pulled into the filter area at bottom of filter media section allowing gross dust particles to fall into Collector Barrels located beneath pyramidal Hopper discharging to a sealed Drum (not included). -- Fine dust is pulled up through the Cartridge Filters; dust Filter Cartridges are cleaned by automatic pulse jet with minimum compressed air consumption; cleaned air continues through Blower and is returned to the building Air Supply though a Silencer. -- Includes: Hopper with slide gate discharging into a sealed Barrel (not included), electrical control panel, support stand with clearance under hopper, discharge for a waste bin/drum.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

Fas Trac Band Mill with 20 HP Electric Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Fastline Super Edger with Hydraulic Power Unit.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 86,250

Fast Line scragg mill, similar to "Big Jake", twin blades 56" dia, electric drive, includes off-bearer belts, price includes controls and machine gone through shop, ready for production

Showcase Equipment
260-250-4645
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved