Equipment For Sale

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

DIEHL 55 Straight Line Ripsaw:Specifications -- 15HP - 3,450 RPM Direct drive arbor motor, -- 2" dia. arbor, 18" blade cap., 4" max. depth of cut, -- 12" min. part length, -- 21-1/2" width of table to the right of blade & 30" to the left, 43" table length. -- 2 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; twin chain drive,Equipped with & Features -- Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade. -- All cast iron machine -- Runs very nice --Complete with: Rip fence,.

DIEHL SL 65-19 Straight Line Rip Saw: 20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; Features: -- 3 HP - 1,800 RPM Feed drive, variable feed speed of 70 - 200 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. Equipped with: -- Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table. -- Pressure beam outfeed guard with pivoting side pressure. -- Automatic pneumatic lubrication of feed chain & race. -- Full overload & under voltage protection. -- Automatic brake for arbor protection, and pressure bar curtain. Option: Diode laser & mounting bracket, please add ...$ 1,745.

20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; 3 HP - 1,800 RPM feed drive, variable feed speed of 70 - 200 FPM. -- 24" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Option: Diode laser & mounting bracket, please add ...$ 1645.

Diehl Model 75 Straight Line Rip Saw Chain is in good shape. Left and right chains are worn evenly. Includes: Laser Variable Speed: 4-speeds

2001 Grecon Dimter OptiCut Model 200-4R S/N 0667.10

--In auction: https://exfactoryauctions.com/Detail/SO-230040/event/A122024$1- NO RESERVE!-- GRECON/DIMTER OPTICUT 204 L Optimizing Cutoff System NOTE: Currently De-installed Specifications: For hard or soft wood. Left-to-right feed. Max. crosscut section 7-3/4" x 1-15/16" to 5-3/4" x 3-1/16". Board width cap. 1-1/5" to 7-3/4", Board thickness 3/8" - 3-1/8", Board length 15" to 20'. Shortest fixed length 5-3/8", Shortest finger jointing length 5". Max. feed speed 750 FPM. Average production rate 36,000' running length/shift. Equipped with: Blade dia. 19-1/2", with 10 HP - 4,100 RPM Motor. 10 HP Servo drive feed motor, (3) Pneumatically-operated top rollers & (1) Driven bottom drum roller. Control, with LCD display & Touchpad. Complete with: 12" W x 23-1/2' L Infeed Belt Conveyor, with Double wheel measuring system & Top mounted luminescent camera, Detects crayon defect marks up to (8) grades. 12" W x 34-1/2' L Outfeed Belt Conveyor, with (4) Sorting stations, with Encoder pulse-controlled kickers, Kick singularly or in batches of 2 or 3 for larger heavier boards. PC-Based Control.

This is a 2019 saw that was deliver new in 2020. Everything is in good working condition and ready to ship. 18’ length of infeed 14’ max board length 35’ outfeed Includes: One kicker. More can be added. 480v 30 Amps

DISA CS-4 MAXI Dust collector with Rotary Air Lock. Approx. 16,000 CFM at 8.7:1 air-to-cloth ratio; 1,725 sq. ft. of filter area, with (128) filter bags filtering to 3-micron. -- General Info: CS-4-M consists of (3) filter modules & one entrance module. -- Comes with: DISA, S56-500 Material Handling fan powered by 50 HP TEFC motor. Fan nominal rating: 16,000 CFM @ 9" SP. Fan is currently mounted on elevated support but can be installed on the ground as well. -- (3) Reverse air bag cleaning modules with motorized fans that clean the bags every (4) hours of operation automatically, each with 2 HP fan motor. A damper at inlet closes during cleaning cycle to prevent blowback. -- Complete with: Hopper bottom as collected dust is conveyed to one end where a NRS-20 Rotary Air Lock where dust is discharged into Transfer fan. Filtered air return unit, 8' support structure to allow for dumpster under Dust Collector. -- Includes: Control panel, motor starters and switches, and Explosion Panels. Material handling main fan w/motor mounted to side of base module. -- 26" diameter inlet pipe, 97" clearance under collector for dump hopper, free standing steel bolt-together structure, -- Features: Dust transfer from bottom of Rotary Air Lock to enclosed container by separate floor mounted material handling fan, approx 7.5 HP. -- Note: Pictured storage bins are not included.

DISA - NFK 9, ...2BL Modular Dust CollectorUp to 45,000 CFM @ 6.25 to 1 air-to-cloth ratio and @ 11.6" w.g. external static pressure; modular, expandable Heavy-Duty Baghouse. -- 7,200 Sq/ft of filter area, made up of (450) filter bags. -- Filter consists of: (9) Filter module sections with: Access door in each section; (2) blank inlet module sections (9) 2 HP Regeneration fans for cleaning of filter media and (2) blank entry modules. -- Includes: (1) 60 HP Belt drive COMBIFAB blower package with: Drive guards; motor & fan are a common steel base/frame with ground level installation; fan delivers about 20,000 CFM. There is sufficient filter capacity for at least 75 - 100 HP second fan/motor. -- Complete with: Outside separate electric disconnects for each cleaning fan. -- "NRS-10" Rotary Air Lock for bottom discharge with: 2 HP TEFC Motor; steel support members dismantled. -- Includes: Some outside pipe (and main headers explosion/access doors). -- NOTE: (2) Cleaning fans are missing and will be supplied at cost. -- Actual model is: NFK2000 9+2 BL HJLR.

2012 Ditchwitch XT1600, 3071hrs., comes w/ 2013 Fallen Trailer & Trencher, $45,900 - call (906) 224-1000

2023 Ditch Witch JT24A Drill -420 hours -Have over 600 feet of HDX drill steel -FM13XB Mixing System -500-gal tank -Marksman Locator -Commander 7A -Trihawk Bits -2-yr Extended Warranty Ready to work like NEW MORE PICTURES COMING SOON!!!!!!

This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM

The seller has confirmed that this Dixie Air dust collection system is in great working/running condition and it is ready to load! - Size: 108-12 - Type: SPB - 50HP - Inlet to the motor - Circumference: 90"

DMC Unisand 2000 43" Wide Belt Sander Includes: Murphy Rogers Dust Dust Collector

12" x 16" Flats? 15" Round?Band Wheels: 16" Diameter?Blade Size:1.5" x 162" x .035"? Work Height:30"? Blade Speeds Approx.: 40 - 450 FPM

2013 DODGE 5500 4X4 6.7 CUMMINS TURBO DIESEL AUTOMATIC 9' DUMP BOX FULL POWER NO POWER SEAT A/C LOW MILES

Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.

2017 Dodge Ram 4500 Service Truck One owner 4x4 dually Cummins Crew cab 150k miles Road ready PRICE REDUCED

DODGE gear reducer: 195:1 ratio; 3 HP. Price $850.00. As-is/where-is. (Inv. # G-3).