You Have Selected

  • Used
  • New

458 Results Found for Biomass Viewing 1 - 20 of 458 results
2017 Bandit 3090 Micro Whole Tree Chipper w/621 Hrs., 4 Years Remaining on Engine Warranty, 765 CAT Engine, 12 Sets of Knives, New Anvil 919-965-7399
Equipment Location:Four Oaks, NC
Grady E. Atkins & Son Logging
3680 Bandit Grinder or Chipper with Caterpillar 700HP Engine, Remote, Blower Attachment, 900 Hours, Recent Checked out all Filters/ Fluids Changed. It currently has a chipper mill but we would switch and install a grinder mill for the same price. Very Clean Machine. Machine needs to go make reasonable offer!
Equipment Location:Elkins, WV
Reckart Equipment Co.
Challenger 75HP Grinder w/New Electric panel, Completely Rebuilt, Magnetic Head Conveyor $40,000 obo 270-483-2829
Equipment Location:Guthrie, KY
Penchem Pallets
Up for sale we have a portable biochar production unit mounted on a 24 ft trailer with custom metal enclosure. This BC-1,000 was made by LEI products. This unit runs on wood chips and sawdust while creating a waste stream of biochar and over 1 million BTU/hr of hot air. The unit running at full power will burn 8-10 yards of wood chips and create up to 2 yards of biochar per day. Fully automated with touch screen controls. Built in 2016. Gooseneck trailer is also a 2016 made by Texas Pride with 8k pound axles. Requires 30 amp 240v single phase electric. Call Rowdy with High Plains Biochar at 307-761-5508 for more information.
Equipment Location:LARAMIE, WY
High Plains Biochar
Complete New 40 million btu. Drying system with a reconditioned 12' x 50' MEC triple pass drum... New 40,000,000 btu "player Design" burner. This burner can burn almost anything, including wet and dry sawdust and chips.. New cyclone and "New York" blower. Reconditioned 12' x 50' MEC triple pass drum.. This complete dryer system was installed in 2015, but never used. This system is currently dismantled, ready for delivery.... The possibility of us rebuilding this system exists for an additional cost. Reasonable offers entertained.
Equipment Location:Freedom, IN
2005 Morbark 6600 horizontal grinder, CAT 3412 Eng, 1050hp, 9200hrs., new teeth, new anvil, new tires all around, REDUCED!! – 570-217-7128 John
Equipment Location:Mifflinburg, PA
Cowan Lumber
2016 MORBARK 223 STAND-ALONE FLAIL $260000 312-953-5535. EXTREMELY LOW HOURS!! PRICED TO SELL. Includes CAT Gold Extended Service Plan 5 yrs/5000 hrs. Recent OEM Inspection and upgraded to cold weather start. This unit is ready to work. Get a lightly used machine at a fraction of the new price (about $400K) and start producing high quality chips immediately.
Equipment Location:Holland, MI
Northern Biomass Fuels LLC
2006 Precision Husky 2366, 9400 hrs , 3412 Cat 900 hp pro heat, Extra Knives, New Belts, $65,000 724-657-7532
Equipment Location:New Galilee, PA
mjs hardwoods
2001 Rotochopper SB-24 Grinder, On Skids & Has a Self-Contained Hydraulic System, 325 HP John Deere Diesel Engine, 5,760 Hrs. This is an Excellent Machine for Sawmill or Pallet Waste. In Good Working Condition. $47,000 obo 440-632-1840
Equipment Location:Middlefield, OH
Countryside Lumber
2010 Vermeer HG6000 Waste wood Grinder w/5000 hrs., Chipper Attachment, Half New Chain, 4 Screens $145,000 obo Call Frank 920-371-3204 920-826-2039
Equipment Location:Sobieski, WI
Pomps Services
ACROWOOD 52” 5216-6 Chipper with the following major features: -- 52” Disc. -- Slant Disc configuration. -- Converted to KEY KNIFE System. -- 125 HP Drive Motor. -- Includes existing Spare Parts. -- New Primer & Paint.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
AIROFLEX "HydroFlex" Model 37.5 Trailer Dumper with 38 FT x 10 FT deck. -- Hydraulic power unit. -- 50 Ton capacity, full tilt. -- Stationary Backstop, no pit required. -- Ready to load... save removal costs. -- This unit was previously tipping "hog fuel" wood trailers.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
Equipment Location:Bridgeville, PA
Anderson Equipment Company
AIR-O-FLEX Full Truck and Trailer (also B-Train) Dumpercomplete with the following features: -- 100 Ft. Tilting Deck to handle full truck and trailer or B-train and tractor. -- Full tipping angle. Great for wood chips, shavings or sawdust. -- Drive-Thru Style for rapid unloading. -- Material Discharge Conveyor. -- Hydraulic Power Pack. -- Steel Approach Ramp. -- Installation Drawing. -- Partially dismantled. Professional rigging and loading is available. Shipping will require two trucks.
Equipment Location:WESTERN CDN
Bill Christoffersen
800-374-5009 ext:365
Equipment Location:Manton, MI
Lutke Equipment LLC
AmeriMulch Mini Mite Colorizer 32' Belt conveyor/Radial Stacker Will produce approx 65 yards per hour This system has been out of production. It is available immediately and ready to load.
Equipment Location:AL
Carolina Machinery Sales, Inc
1979 Asplundh JEY 12756 Chipper - Ford Engine - 300 Horsepower - Pintle Hitch - Average Condition
Equipment Location:Largo, FL
Apollo Equipment
(2) 20' Augers with Motor and Drive
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
Babcock & Wilcox Wood Dust/Oil Fired Steam Boiler
Equipment Location:Franklin, VA
LPS Equipment & Acquisition Co.
BAKER-RULLMAN (or HEIL) 8-24 Drying System built around an 8' x 24' Triple-Pass Rotary Drum Dryer;Complete with the following major components and features: -- BAKER-RULLMAN 8 Ft. x 24 Ft. 3-Pass Dryer Drum with new drum Seals. -- BAKER-RULLMAN Trunnion Bases and Drum Drive. -- Dryer Input Hopper Feeder with controlled speed Screw bottom and new $4,000 Gearbox. Material Input Auger. -- Dryer System Main Fan. -- 10 MM BTU capacity WEBB Biomass Burner with $8,000 of new refractory with professional installation. -- Fuel Bin with screw bottom. Screw speed is automatically controlled by Burner Controls. -- Cyclo ne Collector. -- Cyclone Discharge Screw Conveyor. -- Includes Electrical with $12,000 in new components. -- Burner Modulation Controls. -- NOTES: ● The trunnions are all in good condition with $4,000 of new bearings. ● This type of system is commonly capable of drying up 3 to 4 Tons per hour of sawdust or up to 60 - 65 yards per hour of molder shavings, depending upon input/output moisture content levels. ● A WEBB burner requires about 3/8" minus material and 20% or less moisture content. Often fuel is taken from the product output and there is a fan available on this system for that purpose.
Equipment Location:SOUTH, AL