Equipment For Sale

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with & Features: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.

Wemhoner Variopress

270 Ton WEMHONER - 110"; L to R x 59"; F to B Down-Acting Hydraulic Press: Model KT-M-15/28-240. Clearance between frame is: 126"; L to R x 37"; F to B. -- Nominal bed: 110"; x 59";. -- 4-Clamp Cylinders are single-acting: Approx. 8"; Bore; 6"; dia. rods; approx. 10"; max. stroke. -- (1) Center traversing cylinder: Approx. 3" bore with a 1-3/4" diameter rod (approx. 16 max. stroke). -- Max. daylight: Approx. 16";. -- Approx. 28-1/2"; Operator height. -- Guided with rollers at each corner and (2) gear & rack guides. -- Slide and bed: 4" Thick; self-contained Hydraulic System: -- (2) Reservoirs: Approx. (14) gallons each. -- 4 kW Motor: Approx. 5 HP; 1,800 RPM, 440 Volts, 9.15 Amps. -- Pump: Type "R60A; max. 350 Bar, etc. -- Speeds: Approx. 99 IPM fast down; 2.0 IPM Pressing adj; 99 IPM fast up. -- NO Electrical Controls. -- Overall Dimensions: Approx. 146"; x 65"; x 96"; high. -- Approx. 30,000 Lbs.

FOR CAT 420-440 HOSES, CYLINDER, BRACKET INCLUDED HYDRAULIC MAIN PIN THUMB MESHES WITH 24" PIN LOCK BUCKET SOLD AS IS WERK-BRAU BACKHOE LOADER THUMB WORKS WITH 1/4 XLS SWG COUPLER

FITS CAT 307E-308E NO COUPLER, DIRECT PIN-ON NO OEM MOUNT SOLD AS IS WERK-BRAU CONTRACTOR GRAPPLE

171MM FACE SPREAD 50MM Pins BUCKET SOLD AS IS Fits Takeuchi TB285 WERK BRAU 12" DIG BUCKET

Setworks: Computer setworks - 15 preset locations / Manual setworks - Handcrank adjustment Frame: Heavy duty 1/4" (6.35mm) x 4" (10.16cm) x 10" (25.4cm) tubular steel for vibration free cutting. Feed System: Steel slat bed feed chain. 200fpm max speed / 20fpm min speed. Bands: .042" x 4" / .083 Kerf / Swedge tooth or stelite tipped Guides: Interchangeable pressure guides Drive Wheels: 42" (106.65cm) custom drive wheels mde of high quality carbon steel and dynamicaly balanced. Hold Downs: CS - Double tire hold down / MS - Double sprocket hold down Cutting Specs: Max Length w/ out Return - Unlimited / Max Length w/ Return - per customer requirement Min Length - 18" / Max Width - 14" / Min Width - 3" / Max Height - 14" Motors: 40 H.P. TEFC 1800rpm per head. 3 H.P. to 7-1/2 H.P. variable speed drive Electrical: Includes all TEFC motors, starters, breakers, 440 volt standard. System is prewired, Customer responsible for electric wiring to equipment. Dust Removal: 6" (15.25cm) diameter outlet / Customer is responsible for air suction. Options: Automatic cant return, Breakdown equipment, Operators cab, 2 or 3 way cant/board seperator, Can't turner in crossover, Other voltages available.

2 Head | Manual Set Works | 440V

Grade Resaw 16” x 16”, set up very much like a West Plains, Heavy Duty W/ 44” x 5” Band Wheels, Dual Slat Feed Through Conveyor, Top Press Rolls Air, 75 HP Saw Motor, Includes 4’ x 4’ x 7’ Sawyer’s Cab W/ A/C, Complete Run Around System W/ Transfer Conveyors and Return Roll Cases, Includes Motor Control Cabinet W/ Variable Feed Drive, (22) Bands, Note: Seller has contact information for someone who will remove & load on truck, Ref # 187

2 Head Notcher with waterfall infeed, operational, 72" maximum stringer length

72" | 20HP

West Plains 2 head resaw, 6" wide capacity, electric drive, recently in production and ready to work

Specifications: Setworks: Computer setworks - 15 preset locations (1/2" tp 9" sets) / Manual setworks - Handcrank adjustment Frame: Heavy duty 1/4" (6.35mm) x 4" (10.16cm) x 10" (25.4cm) tubular steel for vibration free cutting. Feed System: Steel slat bed feed chain. 200fpm max speed / 20fpm min speed. Bands: .042" x 5" / .092 Kerf / Swedge tooth or stelite tipped Guides: Interchangeable pressure guides Drive Wheels: 42" (106.65cm) custom drive wheels made of high quality carbon steel and dynamicaly balanced. Hold Downs: CS - Double tire hold down / MS - Double sprocket hold down Cutting Specs: Max Length w/ out Return - Unlimited / Max Length w/ Return - per customer requirement Min Length - 18" / Max Width - 16" / Min Width - 3" / Max Height - 16" Motors: 60 H.P. TEFC 1800rpm per head. 3 H.P. to 7-1/2 H.P. variable speed drive Electical: Includes all TEFC motors, Y Delta Soft Start starters, breakers, 440 volt standard. System is prewired, Customer responsible for electric wiring to equipment. Dust Removal: 6" (15.25cm) diameter outlet / Customer is responsible for air suction. Options: Automatic cant return, Breakdown equipment, Operators cab, 2 or 3 way cant/board seperator, Can't turner in crossover, Other voltages available.

West Plains 5 Head Resaw

#118 • West Plains 2 Head Resaw -- Specifications -- Make: West Plains 2 Head Resaw. Model: WPRS WBS. Serial #: 236. # of Heads: 2. Blade Size: 4”. Cut Capacity: 8” x 20”. Overall Dimensions: 104” x 18’. -- Features -- Drive Type: Electric. Return: no. Wheel Size: 3.75” x 42”. -- Seller Statement -- 1999, 400 Series, Bio-Lube band lube system, bucket # 210 lube oil, Steel slat feed, live press down wheels, box with parts, control box, currently not completely set up Rigging Required. Rigging Fee $TBD

Wood Pellet Manufacturing Plant Equipment;Complete with the following features: -- Design capacity 15 tons per hour. -- (1) Pellet Mill (Pellet Press) – custom built in USA and was producing at a rate of 4½ tons per hour. Comes complete with spare parts. -- WEST SALEM Model 4-4-60S Hammer Mill. -- Bulk storage. -- Conveyors to bagging system. -- Blowers Cyclones & Piping.NOTES: &#9679 Plant was planned for several pellet mills but was shut down due to lack of sales. &#9679 Operated only 3-4 years but has been down for a few years now. &#9679 All equipment remains installed. &#9679 Wood supply was from several sources: processing plants by-product, shavings from planer mills, finger jointing plant, and ground trim blocks. &#9679 No Dryer - Owner using it. &#9679 More details on request. &#9679 Professional rigging is available.

MLS Number 12321010 WEST SALEM WSM5472 Horizontal Grinder -60” Millpower Shaker conveyor/finger screen – deck removed, used to meter flow of material fed by operator and reduce bed depth to make cross belt and head pulley magnets most efficient. -60” Eriez cross belt electro magnet. -Eriez 10K42 kW Silicon Rectifier incorporating: To convert 480 volt, 60 Hz, 3 phase AC to230 volt DC 10,000 watts output Normal convection cooled, full wave bridge circuit Fused AC switch Nema 3r Enclosure -Eries beefy magnet stand to support magnet and chain fall. -60” x 28’6” Slider Bed (Heavy Duty Feeder Type Conveyor) with 8’ section of stainless steel non-magnetic for Eriez cross belt magnet to perform at peak -20”x60” Dodge magnetic head pulley – installed to double up on magnets on conveyor, prior to material entering WSM grinder drag chain feed. Downstream from this is the WSM 5472bh Titan horizontal grinder. Schematics and wiring diagram can be supplied as well. WSM also supplied the chip discharge conveyor and magnetic head pulley and electrical panel with touch screen (by Emerson). Price includes dismantling and loading on buyer's truck. Manuals available for components.

50' West Salem 18" Btm Drops into 19" Btm With Screen S/N 116676 15HP Motor & Drive