RESAW-RM6X6 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -1" Blade - 10 HP Motor (220/1/60 TEFC) - Completely Prewired for 220V Single Phase - Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Mounted at Operators Station - 39 FLA -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Operator Return Table - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 84” L, 90” W, 48” H - Approx. Weight: 1400 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs - (2) 10 HP Motors (220/1/60 TEFC) 2 HEAD Resaw Control Panel - 220V Line Voltage (Single Phase) - 16" Tall X 16" Wide Enclosure (UL Type 1,3R,4,12) - 120V Control Voltage - Service disconnect in panel door - (2) 10HP 220V Motor starters, breaker w/OL - (2) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2) - (1) Emergency Stop Button w/ legend plate- Completely for 220V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit Overload Protection 5' Roller Case Section with Adjustable Legs - 16ga Rollers - 2 Leg Sets with Braces - Height Adjustable from 26" to 32" - Galvanized Finish (Not Painted)

Used -like new,2024 UpSTAK Board Stacker machine for sale. Includes unscrambler, 7.5HP Motor, 15 layers per minute package, 7' Outfeed, and HMI controls. Wired for 480V. READY TO SHIP. CLICK ON VIDEO TO SEE MACHINE UP CLOSE.

Used NXL Notcher -230V 3PH -Dust Chutes -Standard Teeth NXL Pneumatic Notcher - 12” Diameter X 9” Wide Index-able Notching Heads - 0" - 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height, Up to 60” Material Width (longer available) - Production: Up to 800 Stringers Per Hour - Top Hold Down Clamp - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 60” L, 90” W, 50” H - Weight: 2000 lbs

TWIN NXL Pneumatic Notcher - (2) 12” Diameter X 9” Wide Index-able Notching Heads - 0"- 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height (Other Heights Available), Up to 112” Material Length (longer available) - Production: Up to 1750 Stringers Per Hour - Center boot quick adjust from 14” to 18” Wide via Hand Crank - Center boot adjustable from 10" to 22" Wide via with additional setup - Can optionally be used as a single head notcher for other center boot widths - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - Twin Top Clamps - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 120” L, 60” W, 51” H - Approx. Weight: 2650 lbs - (2) 20 HP Arbor Motors (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Panel Face Mounted Rotary Disconnect - Panel Location: Lower Left Side - 96 FLA Will need dust chutes if not using with waste conveyor

- (2) 10” Diameter Steel Brushes (Side Sweeping) - 3/8- 2.5" Tall, 2- 6-1/4” Wide, 18” Minimum Length Capacity - Self Contained 5 GPM System - 10 Gallon Hydraulic Fluid Reservoir - Variable Belt Speed 0-700 FPM - Machined Eccentric Press Cam Board Knocker - Adjustable Feed Belt Height: 27”- 36” - Exit Pinch Roller Height: 34” - 5 HP Motor (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - 13.4 FLA -Dimensions: 90” L, 29” W, 59” H - Weight: 1400 lbs

2 Head Notcher with waterfall infeed, operational, 72" maximum stringer length

The Go Fast Deduster is the solution to sawdust left on boards. Material can be fed by hand or from an inline process into the machines hopper. An adjustable gate allows the rubber feed belt to pull the bottom board forward to the feed wheel and through the top and bottom rotating brushes. THE DIFFERENCE: There are several features that set the Go Fast DeDuster apart from the rest, and it all starts with the brush! Our side sweeping disc brushes sweep sideways, providing cleaner boards than traditional drum brushes. They also do not require an air collection. BOARD KNOCKER: Our famous board knocker system helps meter the boards through the machine one at a time. It breaks frozen and sticky boards apart and prevents 99% of jams!

The Go Fast Firewood Wrapper is the only industrial duty firewood wrapper available on the market today. This machine can wrap a bundle in under 12 seconds, making it the perfect solution for banding firewood bundles. The wrap is tensioned by a standard nut that ensures tight bundles and maximum wrap usage. Our firewood wrappers are simply better by design and unlike other manufacturers, we use high speed farm duty motors along with lubed bathed gear boxes. This allows us to get a higher amount of torque from our energy efficient 1/3HP motor. These components have proven themselves to outlast the light-duty, low speed motors that are commonly found on other firewood wrappers.

The Go Fast NXL Single Head Notcher is a compact, heavy duty, and SAFE machine for your notching needs. Notch new or recycled material or even 6” wide cants. A dual hand control check valve requires that the operator has both hands on the push buttons while the table is moving through the cutter. The cutter head is well guarded and never exposed to the operator. In addition to a front clamp, a top clamp is included to help hold the material down while it is being notched. Unfortunately many other notchers do not include this feature which results in you replacing more cutter tips and spending more money.

The Go Fast TS10 Trim Saw is a heavy duty and compact machine, perfect for trimming boards to size. The easy to use moveable length stops are quick to adjust and allow for multiple, simultaneous board sizes. SIMPLE, SAFE AND STURDY: The easy stop system makes it SIMPLE for the operator to cut boards to length. The operator can SAFELY cut boards without ever having to stand on the blade side of the machine or have their hands near rotating shafts and sprockets. STURDY is one thing Go Fast had in mind when making the TS10 Trimmers. Weighing approximately 1,600 LBS with 3X3 tubular framing, you can bet that these saws will be around for the long run!

The “Twin NXL” is a heavy-duty double head notcher designed to fill the gap between today's entry-level single head pneumatic notchers and high-end, expensive, auto-feed double head notchers. Notch new or recycled material or even 6" wide cants.

NXL-M Single Head Notcher. 20HP motor, can notch 4 stringers at a time. Notches new or recycled material. Equipped with a pop-up guard. Table floats on linear bearings and takes minimal effort for the operator to move.

PRICE REDUCED 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - Top Mounted Powered Tire Hold Down Wheel - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs Additional options included: -Air holdover -6” fence -1.25” blade and guides - (2) 15 HP Motors (230/480/3/60 TEFC) 2 HEAD Resaw Control Panel - 480V Line Voltage Location: Salem, MO

10HP Notchers available with 3 phase or single phase motors. Great for notching NEW wood stringers. The design is compact, low maintenance, and easy to operate. Notches up to 72" long material, extension kits are available. Profile Technology cutting heads. Units are typically in-stock. Manufactured in New London, WI. Dust Collection is recommended, but not required.