Equipment For Sale

QUICK MACHINERY N-P50 Air Pod style Cold Press. -- Heavy Duty I-beam construction with machined steel plates for flat smooth pressing surface.Specifications: -- Platen pressing area size: 62" x 146" with side loading on 146" side. -- 50 PSI Platen pressure over the entire surface area with 93 PSI supply air pressure. Pressure is applied by 12.8" dia. air pods with 5.9" stroke; (36) air pods total for this size press. -- Air powered raise and lower idler rollers in the bed of the press for loading & unloading panels; raising & lowering of conveyor by control button on panel. -- Motorized Adjustable Daylight Opening from 2" to 40"; push button controls operate an electrically powered chain driven worm gear drive system for precise positioning of upper platen setting/opening. -- Controls: 60-Min cycle timers provide visual and audible signals at the end of each cycle and automatically releases platen air pressure at the end of each cycle if desired.Actual Model is a N-P50-05-12-SL-1PL-M-40-R-1Z.• Maximum platen pressure: 50 PSI at 93 PSI supply pressure• Lower platen dimensions: 5' x 12'• Side-loading design• Number of upper platens: 1• Upper platen dimensions: 5' x 12'• Vertical opening: Motorized adjustable from 2" to 40"• Lower platen roller tracks: Yes, non-powered roller tracks• Number of 12.8" diameter, 5.9" stroke air pods: 36• Number of air pressure zones: 1 (5' x 12' pressing)Optional powered roller tracks are available. -- The press model shown in pictures is a dual platen powered feed through end-load press.

QUICK L-HLPP-2-20-43-8-12 ...2-Sided Hydraulic Laminating Press: -- Number of working sections: (2) -- Working width, section #1: 6" and 8" -- Working width, section #2: 8", 10"; and 12" -- Maximum working length: 6,200mm (20.3') -- Maximum working height: 1,100mm (43.3") -- Pressure at the glue line: Up to 175 PSIMain Laminating Cylinders: -- Number of cylinders, section #1: (14) -- Number of cylinders, section #2: (21) -- Size of cylinders: 100 mm dia. x 80 mm strokeHolddown Cylinders: -- Number of cylinders, section #1: (14) -- Number of cylinders, section #2: (21) -- Size of cylinders: 40 mm dia. x 150 mm strokeLift Cylinders: -- Number of cylinders: (2) on each side = (4) -- Size of cylinders: 63 mm dia.Hydraulic Pump: -- Drive motor: 10 HP -- Maximum pressure: 140 kG/cm² -- Maximum Holddown Cylinder Pressure: 50 kG/cm² -- Maximum Side Lift Cylinder Pressure: 50 kG/cm² -- Shipped without hydraulic oil in the oil tank

QUICKWOOD - RO 800-1, ...Denibbing Sander.1-Head with 32" max. cap., 0" - 4" max. part thickness opening. Equipped with: -- (1) Carousel head with: (4) Rotating arbors mounted on a central rotating drive assembly, carousel rotation 2 - 20 RPM, 0.75 HP rotation drive. -- Arbor/spindles are: 11.4" Long; 350 - 1,150 RPM spindle speed with LED readout on control panel; 2.5 HP main motor; each arbor holds a combination of (25) "Quick-Discs" & (12) nylon brush loadings of 13-3/4" max. dia. -- Feed system with: (2) 2-3/8" Wide narrow conveyor belts and side guides (to keep panels from moving side-to-side), motorized width adjustment in-and-out from the center. -- Manual thickness opening 0" to 4". -- Variable feed speed from 6 - 36 FPM, 0.75 HP feed drive. Complete with: -- Control panel and (2) 6" dia. dust collection ports.

QUICKWOOD CD2-300 Moulding & Profile Sander or Denibber;4-Head Brush Loading Sander, 12" width and 4" height cap., for 3-sided sanding & denibbing. Head Configuration: -- (2) "BH300" Overhead rotating abrasive/brush heads, both arbors equipped with a combination of abrasive and brush loadings, 12" long arbors, 12" max. dia. sanding discs. -- 0.75 HP Motor drives each arbor with inverter for 200 - 1,200 RPM arbor rotation speed. -- Right & Left ("BH-140" & "BH-100" respectively) side mounted rotating abrasive/brush heads. -- Tilting heads and adjustable in-and-out, 6" long arbor, 8" dia. sanding discs, 0.5 HP motor each head. -- 0" - 4" Max. manual part height adjustment via hand wheel; 57-1/2" long roller conveyor with PVC covered rollers, variable feed speed 10 - 60 FPM. -- Infeed & outfeed overhead holddown rolls and (1) between the top heads. Includes centralized control panel, hubs, abrasive, & brush. -- Can also be ordered with just (2) top heads or (3) heads, ie. Left or Right. Call for separate prices.

8 or more brushes arranged at 360 ° with respect to the work pieces Adjustable inclination for the profile step QRC module for the super finishing of the flat parts in view

Quickwood Pro 1100 Sander

Quickwood RO 1300 Sander

2018 Quincy Compressor Refrigerated Air Dryer 230V 1ph 60Hz

Quincy Air Compressor

Quincy QSI-500 100hp Screw Compressor S/N 917823 36,264 Hrs

QSI-500 100hp Screw Compressor S/N 95571 33,495 Hrs

TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.

50HP Quincy air Compressor Rotary Screw Air

Quincy 75HP Screw Compressor Serial# 940351

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, good working condition

QUINCY - QSVB-25ANN2F: Vacuum Pump25 HP "QSVB Series": 371 CFM, 29.9"HgV rotary screw vacuum; positive lubrication fluid pump; 3″ inlet and 2″ exhaust port. -- Equipped with:Modulating inlet valve; temperature regulating valve; high discharge temperature shutdown system with manual reset. -- Complete with:Control panel; electrical enclosure; gauges; exhaust separation system; spin on fluid filter; (2) magnetic motor starter kits as pictured. GREEN ONE MODEL #PKT; SERIAL #981113937. - GREY ONE MODEL #SK25; SERIAL #0101-2-SK25 KVAR54.NOTE: The Pump only has (6,935) total hours on the meter!

QUINCY QSVB-25ANN2C Vacuum Pump:25 HP "QSVB Series", 371 CFM, 29.9"HgV rotary screw vacuum, positive lubrication fluid pump; 3″ inlet and 2″ exhaust port.. -- Equipped with:Modulating inlet valve, temperature regulating valve, and high discharge temperature shutdown system with manual reset. -- Complete with:Control panel, electrical enclosure, gauges, exhaust separation system, spin-on fluid filter, and magnetic motor starter. NOTE: The pump only has 969.2 total hours on the meter

Never started it so do not know if it works

QUINDAO YICH - YICH-BC600, ...Automatic Feed Through Moulding Sprayer w/Drying Tunnel & 18" width cap. Machine setup: (2) C.A. TECHNOLOGIES AUTOCAT HVLP" low pressure Spray Guns and (1) GRACO "D54311" twin-diaphragm pump. This machine has only sprayed water for testing its operation and never used finishing spray materials.Conveyor belt: PU Abrasion resistant and chemically resistant material; conveyor driven by an electric motor and gear reduction box; overall construction: Cold roll steel plates, bent & joined for stable construction.Sprayer with: (3) Chambers are closely spaced and removable for cleaning; Guns are adjustable in height & angles to set the best angle for coverage; parts are guided into the machine by left/right roller guides. Specifications: -- Max. workpiece width: 600 mm (24") -- Min./max. part thickness: 10 - 120 mm (1/2" - 4-3/4") -- Min. part length: 600 mm (24") -- Feed speed: Adjustable, 15 - 100 FPM -- Number of spray guns: (6) -- Overall Dimensions - 3500 mm x 2100 mm x 2560 mm -- Weight 1000 kG (2,200 Lbs .. need to confirm)Electric powered IR oven with circulating airOven is a variable speed and variable temperature using a roller type conveyor. Current owner has used the oven at 200FOven Specifications: Min/Max part width ½" – 15 ½" Min/Max part thickness ½" – 5" Variable feed speed up to 50 FPM (14 MPM) Feed motor power 1.5 kW Fan power 1.1 kW Heating Power 10.8 kW Overall size 32’ × 38" x 67" H

Electric 520 STOP THE RESPLIT CUT WITH A KNIFE NOT A WEDGE PERFECT PIECES EVERY TIME Cuts up to 20 Saw blade with changeable teeth Extended Infeed Deck 25 Ft Disc Screener attached 25 Ft Radial Stacker Saw Dust Collecter Waste conveyor for cutoffs Waste conveyor under the disc screener Auto Splitt mode Can be customized