Equipment For Sale

The MDI Metal Detector, designed for sawmill applications, offers reliable performance with its ability to handle logs up to a 38-inch diameter. This 2008 model incorporates a 28-foot infeed log trough built by Morbark, operated by a hydraulic drive for efficient processing. The robust frame, constructed by Mellott, ensures durability and stability during operation. Currently in good working condition, this metal detector system is available for viewing in operation until October, allowing potential buyers to observe its functionality firsthand. This used metal detector represents a cost-effective option for those in the sawmill industry seeking a dependable solution for metal detection.

MDI Surround Metal Detector with 36" x 21' Feed Thru Belt Conveyor with Electric Drive Chassis Model CR-85 S/N 990104

Complete whole log metal detector with conveyor, coil and controls. Handles logs up to 30" diameter.

MDI Mdl CR85 Metal Detector w/Search Coil & Chassis S/N 0909

MDI Metal Detector 19" x 65" Appears new or lightly used

MDI metal detector, built for planer, includes all controls, LIKE NEW CONDITION!

MDI Metal Detector Nolco fiberglass section 6' x 14"

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut.Specifications: -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-shaft ready, 2 blades-1 is movable, good working condition

Meadows edger 4" thick x 36" wide capacity, infeed/ outfeed, 1 movable-1 stationary blade, includes BRAND NEW blades and collars, comes with sawdust blower, recently in production and in good working condition

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

Meadows #2 Sawmill w/ 50’ of track / (2) movable saw vertical edger, husk frame, carriage drive, log turner, mill is complete w/ (2) strand infeed log conveyor, green chain, barn sweep under head saw w/ outside incline stacking section, Detroit 450 KW genset, 150 HP head saw w/ all wire and conduit included, Ref #205

Meadows 4 headblock carriage, Model; #3 DELUXE, 43" center to center wheels, 110 volt over air solenoids, good working condition

Meadows Trojan 36" x 7" Fixed Arbor Gang Saw w/75hp Motor, 8' Gravity Roll Infeed with Powered Cant Positioner, Laser Light System with 6 Laser Lights & 36" x 13' 6" Powered Outfeed

For sale, one (1) reconditioned Meadows grits separator, bottom discharge. This unit is belt driven by a 3 HP 3 phase electric motor. Magnetic motor starter available for additional cost. You can pick up the grits separator in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Portable 2HB Power Receder - Right-hand (can be converted to 4HB) - Hydraulic dogs and hydraulic feed - Includes 1 extra blade - In good condition ?? Call 270-218-2446 – Make your OFFER today!

Meadows Gang Edger

NEW Meadows 3 Saw Edger

Hyd reservoir with oil cooler, approx 20 gal, good working condition