Equipment For Sale

HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp carriage drive, air powered dogs, 40' long track, was used with band head, includes cab, controls and log turner, complete unit ready to operate and in good condition

HMC 50-DBES S/N AC50BD695-02 3 Hbd Carriage, 5x8 Cab, Mudata Scanner/Setworks, 55' Track

This mill is ready to be removed from the current location. - 4 Roll Cases 24’’ 2 center 6.5 Diameter 45’ 56’ 62’ 70’HMC All motor controls included - 7 Lumber Decks Flat Chains 10’ 12’ 16’ 20’ 24’ 40’ 82’ 5 Chains WIDC All motor controls included - 2 Log Decks - 28’ Long 12’wide 3 chains stop loader - 14’ long 12’ wide 4 chains stop loader - All motor controls included - Newman Trimmer, drop saws, scrap belt chain 100’x 24’ - Unscrambler 16’wide x 5’high 8 chains - Air Compressor Model SSREP100 HP - Air Dryer storage tank - HMC Model mm10 4 heah block carriage 49’ - HMC Saw Booth - HMC Feed Works - HMC Husk 54’ bottom saw 36’ top saw - 200 HP motor - HMC Log Turner - HMC Drop Belt Live Off Barrer - 10 Headrig saws inserted tooth 54” - Roof Top Chain 10ft 5 Chain - Blower system - Tie-Cant Deck 62’Lx13’ W 4 chain all motors & Controls - Roof Top Lumber Deck 30’L x 13’W 5 chains all motors & Controls

HMC AC 50 3HB Carriage (Linier Positioning), Track and Panagraph

HMC RH 13' Carriage MDL AC40 w/Elect, Air, Tong Dog, 48' Track, Forestall Husk, 24" x 7' Belt w/Top Saw, Includes Cab & Mudata Comp Setworks, Control Box, Transformer & 40HP MTR, Forestall 3 Saw Verticle Edger w/40hp Elect Mtr., 150HP MTR, Forestall Hyd Carriage Drv Feed Works, Chain Type Hyd Log Turner w/Hyd Stop & Load w/Nose Skids, 22" x 18' Power Rollcase, Allen Bradley 150HP Starter, Square D 600 Vac 400 Amp 350HP Disconnect, (2) Square D Size 3 Combo Disconnect/Starters, Allen Bradley Size 2 Combo Disconnect/Starter, Steel Catwalk Around Saw.

HMC HD40 Carriage Drive (Sawmill) Rebuilt HD40 Carriage Drive, 50hp motor, closed hydraulic system, Factory rebuilt with new equipment warranty. Photos are reference only

HMC AC40 Carriage (Sawmill) Rebuilt AC40 Board Dog Carriage, 4 head blocks, 42” opening, set shaft carriage. Factory rebuilt with new equipment warranty. Photos are reference only

HMC 3 strand log deck, H-78 chain, stop-load for debarker, 10' 6" wide x 19' long, Tulsa Winch electric drive, very good condition

HMC MDS-50 Left Hand Drop Saw Trimmer For trimming Boards, Cants, or Ties up to 8" thick and will pass 10" Material. Feed Chains are 81X chain driven by a 3HP Variable Speed Motor with hold downs, each 24" saw is belt driven by 10 HP motors, starters, and fuses are mounted to the Machine in a Nema 12 Enclosure. 0',2',8',10',12',14', and 16' saw units, set up to pass 20' long material. Automatic length trimming with manual override is controlled by programmable control, powered even-ender rolls with a 2 hp drive, and includes one stationary stop gate. Front, back, and top guards are included, and an Automatic shutdown if a door is open while the machine is running. Includes spacers to raise the machine. 360/440 volt

HMC 75HP DC Carriage Drive S/N 137-98

rosser head, slant track, working condition

2002 HMC ET-10 Double End Trim Saw.

HMC AC40 Modular Carriage

HMC 36" x 12' drive belt conveyor

40' x 24" x 6" Dia. Live Roll Case - Cat Walk & Cross Over Steps

HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.

The HMC 36" Chain Log Turner is a reliable piece of equipment for sawmill operations, designed to facilitate the turning of logs for optimal processing. This used model features a 36-inch capacity, making it suitable for handling various log sizes efficiently. The hydraulic mechanism ensures smooth and powerful turning action, reducing manual labor and enhancing productivity in your sawmill operations. Despite being pre-owned, this log turner is in good condition, indicating that it has been maintained well and is ready for continued use. The simplicity and durability of its design make it a valuable addition to any sawmill looking to upgrade their log handling capabilities without a significant investment. Ideal for improving the efficiency of log processing, the HMC 36" Chain Log Turner is a practical solution that delivers reliable performance. It stands out due to its robust construction and straightforward operation, qualities that are essential in a dynamic sawmill environment.

HMC double end trim ET-10 12ft

Slant track debarker with cab. New teeth on wheels.

HMC 8" X 30" X 22' ROLLCASE W/HYD DRV