Equipment For Sale

Donaldson Torit 2DF8 cartridge dust collector Pulse jet cleaning Torit Downflo 2 DF 8 Pulse jet cartridge dust collector Nominal airflow range CFM 1,020 to 6,300 Filter area: 1,520 sq.ft. Voltage: 208-460 DOES NOT HAVE THE SUPPORT LEGS Several different fan types, sizes and HP available Demonstration video of fan running upon request Dismantled & stored in warehouse for prompt delivery Prior use on wood dust inside of a building Several other larger and smaller dust collectors in our warehouse Contact us for pricing including freight upon request

DONALDSON / TORIT - 2DF-16, ...Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes "New" AirMax Premium Media Cartridge Filters: Fire retardant. -- Total filter media area: 3,616 ft². -- Air-to-Media ratio @ 8,000 CFM is 2.2:1. -- Automatic Pulse Clean System with: Differential pressure gauge and sequencing control in enclosure. -- (2) Hopper outlets with sealing drum cover kits. -- Steel support structure. -- Includes: 20 HP Top mount, direct-drive Blower. -- Rated for 8,000 CFM. -- Electrical motor starter & controls. -- Includes: Installation/Operation/Maintenance Manuals.Sold with 6-Month Mechanical Warranty

Dust collection with baghouse

24 AN Valve | Serial #: 2071507 | 460V 3PH | 30HP Motor

DONALDSON / TORIT DWST6-5 Cartridge Dust CollectorDownflo® WorkStations (DWST) fit anywhere on the plant floor and apply NO restrictions to worker movements or visibility. The full line of WorkStations are designed specifically for those in-plant areas where dirty and/or noisy operations are out in the open—grinding, sanding, chipping, batch mixing or welding. The DWST delivers exceptional performance in metalworking, woodworking, and process applications where high filtration efficiency and ledge less construction is often a requirement. Specifications: -- (5) Module System, each with 10 HP motor, 7,000 CFM. -- (4) Ultra-Web cartridges. -- Pulse-cleaning manifolds and ventures, (2) dust drawers. -- (1) Acoustical panel per module. Louvers mounted on lower section of unit.Includes: -- (1) IEC control panel includes 460-volt motor starters, circuit protection for each motor, transformer, programmable logic controller. -- Magnehelic gauge mounted in a panel door, start/stop buttons, and a through-the-door disconnect switch. -- Pulse cleaning can be continuous or after-shift. -- All components are IEC rated. The enclosure is rated Type 12. -- 1"; Compressed Air Regulator with Filter Separator and Gauge, Black Iron Fittings, and Black Iron Piping Required for Cleaning System. -- Provides a 1"; Common Connection Point for Design Shutters to Tie into with Existing Compressed Air System.

YORK-DONLEE 200HP propane gas boiler and associated controls. Boiler was operated only 5 years. Boiler has been drained and taken care of and removed from service along with the condensate tank. Old controls are available, but suggest purchasing new controls.  See pictures for all information regarding pressure, etc. Offered as-is/where-is with no warranties or guarantees, and loaded on your truck. Price $22,000. OBO.

2015 Doosan DX225LC Excavator 7141 hours Hyd thumb Heat AC UC 80% Plumbed for aux hyds Extra counter weight Very little play in bucket bushing Runs and operates good Using daily

DOOSAN portable lighting with only .2 hours.

2021 Doosan DX225LL-5, Ryans Dangle Grapple with Saw, Clean Low Hour Loader, Ready to go to work.

2023 Doosan DX85R-3, Hydraulic Coupler, Hydraulic Pin On Thumb, 36" Digging Bucket.

2017 Doosan DL250 Wheel Loader, 650 hours with scales. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Doosan DX225 Excavator with 700 hours, With hammer and bucket, Heat and A/C, Radio, Rear view camera. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Doosan DL280-5 Wheel Loader, JRB Quick Coupler, Bucket. Clean Low Hour Wheel Loader.

2019 Doosan DX225LL-5 With 3,600 hours, Still has Warranty, Rotobec 360 grapple. Weight 48,722 lbs Length 31.31 ft Width 9.8 ft Height 9.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Doosan DX225LX-3 Excavator with a Fecon Mower Attachment along with Stump Grinding Attachment. Fecon Model BH80 Pony Motor with Caterpillar C-7 with 300 Hours. The Doosan has 4,000 Original Hours, Bearings on Mower were done 100 Hours Ago, Good Undercarriage, Enclosed Cab with Heat and Air Conditioning. Operating Weight 48,281.3 lb Ground Clearance 1.58ft in Height To Top Of Cab 9.77ft in Length Of Track On Ground 14.59ft in Tail Swing Radius 9.16ft in

2018 Doosan 225 with 5,700 hours, Quick Coupler, Hydraulic Thumb, Digging Bucket, HD Counter Weight, Forestry Cage on cab. Operating Weight 47399.4lb Shipping Length Of Unit 10ft in Shipping Height Of Unit 10.21ft in Width To Outside Of Tracks 9.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Doosan dX140LC -5400 hours -A/C and heat work -Power pack is a browns Brontosaurus Brand with a deer 4045 engine making a 125HP -Includes -Ryan’s equipment stump grinder -Tag brand bucket 36” dirt bucket with tag quick coupler - Bodine demolition grapple -Also have a brand new denis Cimaf tilt system I can add in for extra cost Ready to work

2017 Doosan DX300 LL, 6000 hrs., w/Southstar QS605, $300,000

2018 Doosan DL250-5, Hydraulic Coupler, Aux Hyd, Bucket. Clean Machine.

2018 Doosan DL220-5 Wheel Loader, In Stock Ready to go, JRB Hydraulic Quick Coupler and 3 Yard Bucket.