Equipment For Sale

NEDERMAN S-1000 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Available in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 45 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-500 BAG HOUSE DUST COLLECTOR. -- Open Bag house designed for interior application; 5 HP TEFC material fan motor, 1,750 RPM; free standing 2,000 CFM open frame bag house, 162 sq. ft. of filter area via (16) beane material filter bags; 7.5" W.G. static pressure. -- Bottom discharge into (2) plastic waste collection bag. -- Includes: Side-mounted blower assembly with support legs; (2) quick disconnect clamps for the plastic bags. Starter motor with push buttons. Option:42 Gallons Drum Discharge, Single Drum (2 REQUIRED FOR COMPLETE S-500)

NEDERMAN S-750 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump Bin

NEDERMAN - S-1000: BAG FILTER Dust CollectorThe NEDERMAN S-Series Baghouse Dust Collector is: Quick to install and easy to operate. It is the ideal solution for the small shop or single work-cell operation. -- Includes: 10 HP Motor; CFM range from 4,000 CFM @ 8" WG to 5,000 CFM @ 7" WG. -- Equipped with: 10 HP - 1,750 RPM TEFC Motor; (24) Beane material filter bags; (3) plastic waste collection bags; (3) clamps for easy removal of waste bags; magnetic starter. -- Features: 360 Sq./ft. of filter medial; easy installation, typically (1) hour; quiet operation. -- Inlet opening 15". (2) Units available!

N&A Air pop up trim saw

Brand new 19ft Neustar Hardox 500tuf heavy duty dump box. Dump body Includes hoist, hinge, top mount slim-line tank, lighting and wiring installed. Painted CAT yellow. High lift gate, strobes, integrated reverse lights, pre-installed & drilled tarp mounts. Ready to set on a chassis. Install available. Located in Carlton MN

Brand New 23' Dump box. Includes hoist, hinge, cylinder, top mount slim line tank, front cylinder trunnion mount, lighting installed and wired, High Lift Tailgate, painted black. Located in Carlton MN Made in Winnipeg Canada Price Includes FET tax 23' long Sides are 48" high Tailgate is 54" high Is specd with Hardox 500Tuf all the way through the floor, walls, and gate High Lift tailgate Asphalt Tail taper Adjustable cab shield Pre-mounted/drilled tarp mounts & holes Heat Ready Shovel holder Can install strobes if needed

PRICE INCLUDES FET -- Brand new 18ft Neustar Hardox 500tuf heavy duty dump box. Dump body Includes hoist, hinge, top mount slim-line tank, lighting and wiring installed. Painted viper red. High lift gate, strobes, integrated reverse lights, pre-installed & drilled tarp mounts. Ready to set on a chassis. Install available. Located in Carlton MN

NeuStar HURRICANE BOXES 24’x102”, 8’ walls, AR450 floor and walls, height extensions available - cab shield setup for rear mount loader - setup for front mount loader or trailer mounted

New Holland C337 Track Loader Just under 1400 hours

2021 New Holland E57C Excavator ONLY 1013 Hours, Yanmar 66 HP Diesel Engine, Grading Blade, Undercarriage is 95%, Enclosed Cab with Heater, Air Conditioning and Radio, 2 Speed Drive, Hydraulic Thumb 76" Angle Backfill Blade, Camera, Mint Condition, Ready for Work. Weight 12,566 lb Transport length 19.65' Transport width 6.30' Transport height 8.37' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Good Condition Enclosed Cab Comes With Matching Parts Machine

2010 New Holland E 27 SR 4319 hours Good UC Rubber tracks at 80% Work ready

2019 New Holland C232 -1860 hours -Serviced at 1810 hours -Enclosed cab with heat and AC -Joystick control -2 speed -Super b superboom -Wide track -Power quick attach -Keyless start -Foot throttle -Radio -Air ride and heated seat -Front electric -Construction strobe kit -Orginal paint machine 1 owner -No issues leaks or codes

New Venture Manufacturing Gang Rip Saw Hydraulic Tank (5) Moving Blades Laser Tower Touchscreen Controls This machine has been removed from service. The photos showing the system setup were taken before it was removed

Used NYB fan , series 20 GI, 38” wheel, 21” inlet, 50HP 50 HP, other HP motors available The fan has been primed & repainted in Feb. 2025 Inlet diameter: 21-1/2” Outlet size: 20-1/2” X 17” Wheel size & type: 364 DH Wheel Diameter: 38” +-, Shop Number: B12787 Year: 2007 P.O. # 15745 Disc.: UB ROT: CW,. We have other fans available Dust cyclones are also available A Video of fan running is available We provide a wooden pallet for shipping Shipping dimensions--without pallet: 80” wide x 64” long x 63” tall detached fitting Weight with pallet: 1,800 LBS, Contact us for a freight rate.

NYB 28" Blower

New York Blower Co. Shop# R13016-100, Size 407RTS, 26" Inlet & Outlet, 60HP Motor, RTS Fan.

NYB GP Size 182 Bloer with Electric Motor