Equipment For Sale

Salem 6' Headrig This saw was dismantled in 2017 and put in a container. It was never reinstalled. The container is available if someone wants it.

Salem 6' Band Heading

Salem 54in Air Strain Left Hand Resaw Band Mill, Cartridge Guides, Manual Stop Guide, 1.3 Top / 1.44 Bottom - Call Jeff for more info at 574-370-5050 We can go through this mill if customer needs that. An offbeat bel;t can be added for an additional cast as well.

Offbear belt, wheels and hood included. - Call Jeff for more info at 574-370-5050

42" Salem LP

bar type log turner, used with 42" carriage, hyd drive, good working condition

Salem 54" band Mill - S/N-L96655.83

Salem 72" Band Head Rig

SALEM operator's cab; approximately 5' wide x 10' long x 8-1/2' tall; with seat and A/C on top (adds 18" to height); no window on one side; rear entry, 30" door.  Offered as-is/where-is, as removed from service.  No warranties or guaranties. Price $7,000.

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good working condition

Salem Insulated Cab, 4’x8’, NEW glass reconditioned.

Salem 6' x 48" Top Arbor Edger S/N 88-133499 W/20' Outfeed

2018 Salvador SuperCut 100 Automatic Crosscut Saw PRICE REDUCED

SALVADOR - SUPERANGLE 600, ...Pusher Chop Saw. Provides complete chop to length & optimization of wood strips including the elimination of defects. -- Infeed is made of Heavy-Duty steel frame; working height: 1,000 mm (39") from floor level; safety provided by a light curtain. -- Pusher slides on double hardened rails. -- Reading Operation: Uses (2) Sensors: (1) for overall length and the other to read the crayon marks. -- Transmission of power: From motor to the carriage; accomplished by a 50 mm wide steel reinforced toothed belt. -- Part held in place by (2) aligners before & after the blade; insures a square cut. -- Saw box area: Enclosed by interlocking steel cover with a large window for clear view; Saw travels through an aluminum table insert that can be easily changed as needed; High Efficiency motor, IE3 rating, helps keep power consumption at a minimum. -- Technology: Operating software: Customized Windows-based program; designed to be intuitive and specially designed for optimization of the wood. -- Large 19" monitor at operator eye level; PC set up with: SSD Double hard drive with 2nd being a clone to have and be ready to back up in the machine. -- Cut lists: Can be uploaded remotely by network connection or flash drive; chop length optimization can be set for minimum waste priorities. -- Optimizer supports defecting crayons, as well as up to 5-grade qualities. -- Electronics: Multi tap transformer steps down higher voltages; 460 - 600 to the voltage requited by the machine. -- SP 15 Magnetic Strip Measurement: Technology improves positioning from basic encoder standards to absolute measurements of +/- 0.1mm. -- Outfeed: 0° Belt and (1) PC double ejector. For applications of many workpieces cut at angles, it is best to eject the workpieces together with one large rack & pinion ejector. Workpieces are pulled from the Saw on an outfeed belt. - Once the parts are clear of the Saw, the large ejector manages all cuts in 1-push onto the steel table for collection. WORKING CAPACITYMaximum board length before cutting: 5,100 mm (16').Minimum board length before cutting: 500 mm (19.6").TECHNICAL SPECIFICATIONSMain saw power: 15 HP.Saw blade specifications: SA600; Max. 00 mm; dia. bore 35 mm.Maximum pusher reading speed: 60 MPM (200 FPM)Maximum pusher pushing speed 60 MPM (200 FPM)CUTTING CROSS SECTION &#9679 0°: 100 mm x 360 mm / 160 mm x 310 mm. &#9679 +/- 45°: 100 mm x 260 mm / 160 mm / 220 mm. &#9679 +/- 70°: 100 mm x 120 mm / 160 mm x 100 mm.Minimum: 15 mm x 30 mm.Number of cuts within last 40 mm of board One: (1)Maximum workpiece weight: 110 kG (242 Lbs).Power Requirements &#9679 11 kW. &#9679 Primary supply voltages: 220/380/420/440/460/480/560/580/600 V.Pneumatic Requirements &#9679 Compressed air supply: 600 - 800 kPa (6 - 8 bar). &#9679 Maximum air consumption: 300 Nl/min.Dust Extraction &#9679 Intake diameter: 160 mm Upper; 120 mm lower/ &#9679 Extraction System Collection speed: 28 M/s. &#9679 Dust Extraction Capacity: 1

Samuel Rogers 66" Knife Grinder

KENT - Single Head, ResawSpecifications: -- 15 HP Motor. -- Blade size: 168"; x 1"; x 0.035"; 2TPI. -- 6" Wide feed belt. -- Operational working heights: 1/4" minimum cut to 8"; maximum. -- Feed speed: 20 - 150 Feet per minute.

Sanborn 6' Left Hand Double Cut Band Head Rig on 17 Degree tilt

Sanborn Machinery RH 8 Saw Drop Saw Trimmer with Hydraulic Drive

Sanborn 5' Band Head Rig Air Strain w/ 100HP Electric Motor