Equipment For Sale

In Stock. Brand new AKKUSLAR Model CBK 600 multi cut & double end trimmer w/ controls mounted on machine. 5 Saw with 4 easy slide and lock movable saws 7.5 HP each motor. Electric Feed Through sharp chains.. Price and performance will amaze you with this 50 year manufactureer of sawmill machinery. Simple handling and operation easy access for maintenance This machine includes a set of 5 saws at no additional charge also a 45’ X 16" wide X 7" Deep 14" - 16" as it is a split level overall belt conveyor to adapt to the trimmer as you please (throwing it in for $1,500 Call, See this machine at the Nashville Forest Products Machinery & Equipment EXPO August 6-8 Kittrell Sawmill Brokers for more information (931) 797-6284

Baker 2015 seven head “C” Model Band Resaw with 20hp motors, 10hp hydraulic drive unit, & return conveyor. This machine has been factory checked, repaired, and tested and is ready for delivery. This saw is electric complete and wired for 480 volt 3 phase.

Baker Model A Resaws comes with: Return conveyor, Powered Hold Down, Power Hold Over, Infeed/Outfeed Turnarounds, 240V 3Phase

(3) Baker Wood Wizzes 6x, variable speed 5.5 HP motors, 480 volt with 6X cutter heads available, The Wood Wizz is a machine that is designed to surface and finish slabs, burls, tabletops and even recycled timber with a lower labor input. The machine is ideal for woodworkers who want to add value to their material and produce a perfect finish without any tearing, ridging, or burn marks. The Wood Wizz runs on a X, Y and Z axis. It includes a large 6" cutter, 10 square cutter inserts, speed controller, two inverters, sanding disk with pads & sand paper, dust tower, dust hosing and fittings. Also includes an edging/joining cutter to combine two or more pieces of material flawlessly. 3 machines very lightly used and in perfect shape. 6x wood wizz footprint is 7’7” wide x 19” 6” long, processing area is 6’ wide x 17” 10” long adjustable leveling legs, welded steel frame. $20,500, 21,000 and 21,500 each. Machines all have about the same hours and are approximately 4 to 6 years old. Contact Michael at [email protected] 828 779 7102 Machinery located in Jacksonville Fl.

Balfor Cord Wood Saw Skid steer Hookup, 17ft Conveyor, Comes with 3 extra blades 2 new and 1 used, and 2 gravity roller conveyors

2018 Barko 495B Crawler with Cummins QSB 6.7L Tier 4 engine. 23" cab riser w/hydraulic tilt. 32' boom with heel. 5250 Strong-Arm Barko grapple. Foot swing with dual travel pedals. Jewell track system with 32" pads. Plumbed for saw. Tight, clean machine used to load and sort on a log yard (never used in the woods). Good A/C, heat and lights.

BM&M screener, 7’ x 18’, Model # 7X18 2CS, used BMM shaker screener YouTube Video of screen operating during a demonstration video: https://www.youtube.com/shorts/llwS3Nvw2nE Additional photos & videos are available upon request, Model # : 7X18 2CS Serial # 7719 A? Top screen size openings are 2”, Buyer can contact BM&M and ask them about different screen sizes. This vibrating screen was modified to a single deck by the previous owner, but we believe that you can install second screen deck—verify with mfg. BM&M Additional photos and videos are available This screen has been repainted, we do have photos of the screen before the paint job. Weight: 11,000 LBS+- Shipping width: 9ft 11 inches wide X 27ft long x 7ft tall+- Contact us for a price and a freight rate. https://www.youtube.com/shorts/llwS3Nvw2nE https://youtube.com/shorts/SKUMYc7pCG0?feature=share

COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.

2021 CASE 850M, 858hrs., Winch, 138hp, Enclosed Cab w/ Heat/AC, 20” Track Pads, 6-way Blade, $147,000 · Call Bob at 906-364-1853

CASE 850G, forestry package, winch, U/C is poor, have 29” pads go with it, $25,900 · 507-259-8000

Arch - Dual Function Blade Emissions Level Lighting Online Owner's Manual Product Link Radio - Bluetooth ROPS - Enclosed Tire Chains Tongs Ultra Low Sulfur Diesel Fuel Wheeled

2002 CAT D7R 10375 hours 80% CAT U/C winch $129,500

535C Skidder in for Dismantle

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! CHECK THIS SET UP OUT!!! DISC MULCHER ATTACHMENT! COMES AS PICTURED! Enclosed Cab, Air Conditioner, Air Ride Seat, Joystick Steering, 13 in Track Belts, Hydraulic Coupler, Counterweight Kit! Shipping not included.. Call for Pricing!!!

Air Conditioner Auto Shift Boom, GP Bucket Counterweight Differential Lock Engine Enclosures Lift - Standard Lighting Mirrors Online Owner's Manual Product Link Radio - Bluetooth Ride Control ROPS - Enclosed Steering Type - Wheel

Caterpillar 518 Cable Skidder with CAT Model 518 Winch, S/N 94U01877, $30,000 OBO 731-273-0038

6" x 36" capacity, 8' infeed/4' live outfeed, 1 movable & 1 stationary blade, this unit is completely rebuilt and ready for production, comes with a 6 month warranty , LIKE NEW CONDITION

NEW Custom Made Stainless Steel Diptanks, make to your specs. Also, custom sawmill fabrication. 301-399-1057

TRACK MOUNTED LOG LOADER DAEWOO 220LL DOOSAN DIESEL ENGINE, S/N: 47910 JEWELL SL3612 BOOM/SWIVEL GRAPPLE MODEL 4051SLBR, 27-1/2" 2-STAGE TRACKS 35,060 hours

Aluminum Open Top, Spring Suspension, Aluminum Top Hinge Door, Aluminum Floor, 22.5 Tires Slide Tarp, Extruded Aluminum Top and Bottom Rail, Side Post on 16" Center Settings, Aluminum Prepainted White Sides, Front and Rear Ladders Same trailer with Shurco Lock and Roll tarp $42,500 Same trailer with Live Floor $69,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!