Equipment For Sale

--high output machine-- COMIL XPRESS Case Clamp (Automatic Feed Through) Specifications: Working width 180 - 760 mm (7.09" - 29.92"). Working length 250 - 2,500 mm (9.84" - 98.43"). Working height 250 - 1,300 mm (9.84" - 51.18"). Working table height 500 mm (19.69"). Conveyor speed 35 MPM (114 FPM). Beam speed: 18 MPM (59 FPM) Horizontal, 20 MPM (65 FPM) Vertical (Combined). Beam pressure: 1,800 kg Horizontal (3,968 Lbs.), 2,000 kg Vertical (4,409 Lbs.). Equipped with: 31” W x 17’ L x 26-1/2” H Motorized belt conveyor. (2) Vertical beams, with Ball screw drive, Each with (3) Pressure bars, 0.37 kW (1/2 HP) - 2,750 RPM Motor, Rack & pinion drive. Top beam, with 2.9 kW (4 HP) - 1,500 RPM AC Servo motor and Rack & pinion drive. Length & Height Sensors. BIESSE "NC 400" CNC Control, with 6" Color LCD display. Complete with: 3' x 12' Pressure-Sensitive Safety Mat. NOTE 1: Infeed & Outfeed Conveyors Not included. NOTE 2: Machine is currently being fed by 600 V, and Seller states there is a built-in Multi-Tap Transformer converting to 400 V. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

COMPAIR - LeROI WM-100SS II WQ, ...Rotary Screw Air CompressorSpecifications: -- Main motor: 100 HP -- Working pressure: 125 PSI -- Capacity: 445 CFMNOTE: THIS MACHINE REQUIRES AN EXTERNAL COOLER Note: This machine has (21,311) hours on it.

COMPAIR/LEROI WM 125SS IIA Rotary Screw Compressor.Equipped with: -- 125 HP 125 PSI, single stage asymmetrical rotary screw air-end, triplex bearings in air-end for long life, efficient 3-stage air/oil separator at 1 - 3 PPM. -- Microprocessor based control system includes: -- LED Diagnostic readout with (10) operating conditions, (8) control modes, (4) emergency shutdowns, and (4) fault warnings, microprocessor control bypass load/unload. -- 7.5 HP 230/460 V Cooling fan motor. (26,951) Total operating hours.

Complete mill ready to dismantle and move. - Precision Roster Head Debarker - Corley Sawmill & Carriage - Comac Dry Kiln

32" Concave Belt Conveyor

30' Concave Belt Conveyor with 24" belt

30” x 165’ Concave Belt, Conveyor/Shaft Mount Drive

CONCEPT-AIR - S12, Primary Filter Bag House Dust Collector System complete with the following components and features: -- Fan model HDR32 (CONCEPT AIR); belt driven with 100 HP Drive Motor. -- Material Discharge Screw Conveyor followed by a Rotary Air Lock. -- Return Air with: Summer/winter diverter. -- Shell: 12' Dia.; houses (xxx) bags of size 8" x 120" Filter Bags; total of x,xxx sq/ft Filter Cloth. Cleaning is with shaker system?. -- (4) Door Explosion Venting. -- Support Structure. -- Catwalk with Access Ladder. -- Professional removal and loading is available. -- NOTE: More information to follow.

7,000 Square feet of cloth Approx 70,000 CFM (2) 37" Positive Fans: 150 and 125 HP Ready to load on your truck!

CONCEPTION CRP-180 Short Block Feeder Infeed ConveyorSpecifications: -- About 4 m long X 1.2 m wide, 2-ply rubber belt, friction back with Photocell for automatic operation -- Short Block Feeder; Blocks to be 25mm longer than width -- 14' rotating carousel with adjustable speed via VFD with Motorized wheel to avoid blockage -- Exit opening adjustable to the block width -- 200 mm x 7m long belt conveyor to carry the blocks to index rolls; Servo indexer controlling the flow powered by an electric motor; Speed-up belt powered by an electric motor -- Wane System: Scanner to detect wane integrated in conveyor -- Display screen to show wane detected; Kicker to kick blocks that are not in good orientation -- Conveyor to return it into the spreader belt conveyor -- Automatic Operations

750 kw Generator This was owned by a hospital. Seller purchased both units and never used them.

PRICED REDUCED Cone 2-Saw Independent Arbor Optimized High Speed Edger, 4/4 to 4" runs 14 boards per minute W/ Tailing Device W/ Innovec Generation III Controls W/ Lots of Spare Boards & Parts to Keep Software Running, Includes MIC Unscrambler, with even ender up top. Scanning Bar and hi-speed indexible infeed and tailing belt outfield. On the ground and ready to load. Taken out with Videos and instructions to re-install. A must. Ref #131

OSI Low Profile 30-degree Slant Canters with Thumper rolls and sharp chain. Call for pricing

CONQUEST 1-23H Horizontal 32 mm Boring Machine;Specifications: (1) 23-Spindle horizontal boring head, 2 HP "BALDOR" motor, helical gear driven spindles spaced on 32 mm centers, 3,450 RPM; cast table. -- Equipped with: Pneumatic head activation, side fences. -- Complete with: (2) Pneumatically activated holddowns and foot pedal. NOTE: This unit has 2 sets of arms. All the screws have been replaced for the drill bits. Ready to go to work!

CONQUEST - 2-46: Double Row Line Borer -- (2) Rows of (23) spindles; drilling depth up to: 2-3/8"; drills from bottom-up. -- Specifications: (2) 2 HP BALDOR Motors; 3,450 RPM spindle speed.Adjustable opening between heads from: 5-1/2" - 27" w/mechanical digital readouts. -- Equipped with: (2) Pneumatic holddowns; 120" back fence with: (3) Large flip stops; (2) air index pins for sequence boring long side panels; table height 37-1/2". -- Complete with: 10 mm Collets; position indicator; air/electrical controls; foot pedal for clamping & boring cycle. -- Includes: Full set of 5 mm bits.

Hydraulic Power pack with 2 Hydraulic pumps 30hp & 7 1/2hp, oil cooler & Accumulator 30 HP & 7 1/2HP pumps 30 HP Continental Pump 3,500 PSI ( 241 bar), disp 2.62 in3/rev. P/N: 259012 / HPV-20B35-RF-O-1R-B VELJAN 7 1/2HP pump with Baldor 7 1/2hp, 2HP Baldor motor oil cooler Contact us for a delivered price Wooden pallet/crate will be provided for shipping

Continental Automatic Gas Fired Boiler S/N L 196710

Hydraulic pump power unit, 3500 psi, 29 GPM. 100 gallon tank, 30 hp Continental Pump model: HPVR-29B35-RF-O-1R-A 100-gallon Tank MFG: HTS/Hydraulic Technical Service, Eugene OR. Hydraulic power pack 3,500 psi. Pump P/N : 1021823 Pump Disp. 3.97 in3/rev 3500 PSI max pressure, GPM: 29/30? 4 Nachi Solenoid hydraulic valves 30 HP Toshiba motor: 230/460,1770 RPM, Frame 286TC, TEFC, Duty Cont., Inverter Duty, VPWM, Severe Duty, Ins. F., Date: 2014 on tank Tank Heater: Watlow, 1ph, 1500 Watts, 240/480 volt, Prior use and stored inside a building. Approximate Shipping dimensions: 54”W x 54” L x 84” tall, 1,900 LBS. a pallet/crate will be built at NO cost for shipping, tank has been drained of oil. Contact us for a shipping rate

10 hp hydraulic power pack, 40 gal. tank, pump Model PVR15-15B15-RF-0-5-A-1, good condition

Cook 6" x 48" 2 Saw Edger. W/ in & out feed.