Equipment For Sale

Salem Insulated Cab, 4’x8’, NEW glass reconditioned.

Salem Linebar Resaw Runaround includes: 52in X 15ft in Feed Rollcase with Positioners & Log Turners, 54" X 35' Outfeed Rollcase with 2-Way Chain Jump Transfers, 12' X 14.5' 5-Strand Transfer Deck with 10' X 11.5' 4 Strand Camelback Chain, 12' X 10' 4 Strand Cant Lowering Deck with Air Stops & Board Tipples, 12' X 14' 4 Strand Transfer Deck, 5 Strand 180° Transfer Return Deck into 11.5' X 15.5' 5 Strand Deck W/ Hydraulic Stops, Flippers & Pin Stops All with Electric Drive

Salem 7.5 hp Electric / Hydraulic Power Unit

Salem 25hp Electric / Hydraulic Power Unit

MLS Number 10124106 SALEM 2 HD BLK Circular Sawmill Salem carriage opening to 42" Control consul and PLC box Tyrone Berry feed works 100 HP Tyrone Berry hydraulic water cooled pump Laser light system Sawyer booth 3 waste conveyors 2 log in-feed decks Stop & load with ram type log turner 3 sets of 30" live rollers Electrical panel 400 Amp disconnect Many additional parts included

SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.

8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only.  Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls.  3 7/16", double keyed, saw mandrel.   Hydraulic feed.  Saw shifting device outside of frame but no saws or collars but with shifting arms.  3 sets rubber cushions on press rolls.  All sprockets are new with hydraulic drive.  No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring.  New bearings on feed rolls.  20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00

36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00

Salem 72" Band Head Rig

bar type log turner, used with 42" carriage, hyd drive, good working condition

Salem 35" Ring Debarker 5-Knife Current MCC will be used with another line. They may have an MCC to go with it. Indeed/Outfeed Rolls may be optional

42" Salem LP Carriage

Recently Refurbished 22" Ring Debarker New Controls Optional 22" Metal Detector

Salem 6" x 48" Gang Edger w/10' Powered Infeed Rollcase, Knurled Chrome Feed Rolls, Overhead Pneumatic Hold-Down Press Wheels, Hyd Driven, Material Positioners, Hyd Operated 19" Saw Shifting System, Laser Light Shifting System, (1) Laser Light, Controls, 75Hp Motor, 10Hp Hyd Power Pack, T S Manufacturing 24" x 20' Pneumatic Lateral Shifting Edger Outfeed w/(5) Overhead Powered Feed Rolls & No Drive

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition

42" Salem LP

Salem 6' x 48" Top Arbor Edger S/N 88-133499 W/20' Outfeed

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good working condition

SALEM Cab Controls

SALEM operator's cab; approximately 5' wide x 10' long x 8-1/2' tall; with seat and A/C on top (adds 18" to height); no window on one side; rear entry, 30" door.  Offered as-is/where-is, as removed from service.  No warranties or guaranties. Price $7,000.