Equipment For Sale

Precision 58" 3 Knife Chipper S/N 1973

Precision 58" 3 Knife Horizontal Infeed Top Discharge

6 knife, top discharge with heavy-duty base and Gen 3 throat.

Precision Kwik Chip Unit consisting of a 58" 6 knife chipper with a 150 HP electric motor, 7x7 Precision chip screen with U-joint type hangers, pipe, cyclone, and chip blower.

Precision 58" 3K Chipper

Precision 58" 6 Knife Chipper S/N C4173 with Precision 6 X 6 Screen. Never Has Seen Wood

Precision 58" 6-Knife Chipper model: 58-15 s/n: 2704

Precision 58" dia, 6 knife, hard surfaced anvils, Kwik-Change knife system, THIS UNIT IS BRAND NEW!! in-stock and ready to ship

Precision 6 knife chipper and chip-pac, includes Precision 6' x6' shaker screen and cyclone, price includes repainted and gone through shop, good working condition

New 58" Precision Chippers in stock- 6k or 8k- Horiz Feed Top Discharge

48" 3 Knife Chip Pack S/N C-1029 75HP Electric Motor 5'x 5' Chip Screen

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

44' Precision Square Pan Vibrating Conveyor

Husky Brute Log Loader Self Propelled No Engine PRICE REDUCED

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED

75" Precision 6 Knife Chipper S/N C-1732

6-knife, top discharge.

One (1) Used 1991 Precision 96” Model 96.27 Horizontal Feed, Side Discharge, 4-Knife Whole Log Chipper with 8" thick disc and disc brake assembly. Serial number is C.2422. 27” maximum log diameter. Chipper has not run heavy production and appears in very good condition. Many spare parts and knives included. Weight is 35,000 lbs. Average production capacity is 125 tons per hour. Inventory No. 10238. Price, FOB Portland, OR --------------------------------$29,500.

1996 model Precision 96" chipper, horizontal feed, bottom discharge, left-hand with 8" thick, 5-knife disk. Includes 2 each 500 HP, 460 volt, 1200 rpm motors, one WEG 500 HP soft start, one AB 500 HP soft start, one GE Panel with 2 each 800 amp disconnect switches, substructure to ground under chipper, pallet of new chipper parts, high volume drag chain 52' long under chipper, 48" wide x 55' long concave belt.

96" Precision 4K Left Hand Chipper w/ Andritz Turnknife System installed in good shape. Chipper had over $40,000 of parts installed less than year before removal.