Equipment For Sale

2012 Diamond Z DZH6000 with a C-27 1000hp engine with 6,185 hours. Extra parts and screens, service records available. Weight 93,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Diamond Z 1463B Tub Grinder, Frame hours are unknown at this time. 400 hours since 3412 rebuild. Everything runs as it should. Grates supports will need to be address as some point. Weight 98,000 Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Diamond Z 6000 Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Diesel, Hours are 6361 Original, Wireless Remote Control, Tri-Axle with Air Brakes, Ready to Grind. Length 44' 1" Width 11' 11" Height 13' 10" Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Diamond Z 1463B Tub Grinder -3051 hours -Cat C-32 Tier 2 1200 hp engine -New hydraulic pump -Brand new fuel tanks -Hydraulic valve update Clean machine turn key!!!!

2023 Diamond Z 1463B -150 hours -1200hp tier 4 cat Engine -Radial magnetic belt -Air compressor and engines screen protection Turn Key !!!!showroom quality still

DIAMOND Z DZT 1463B Tub GrinderThe 1463B is the standard by which all tub grinders are measured. No other grinder can match its power, production or versatility. It grinds wood waste, green waste and even tires at unparalleled rates.Specifications: -- Engine: CAT C32 1,200 HP / Tier 4 Final -- Screens: 5' x 7' -- Screen Area: 6,795 sq. in. (43838.62 sq. cm) -- Mill feed opening: 40" x 62" -- Productions: Up to 135 TPH/600 YPH -- Hours: Approx. 160Equipped with: -- Transmission: Fluid Coupling Drive -- Air Compressor Package -- Radial Stacker -- Radio Remote Control -- Tool Box

2006 Diamond Z 1463B Tub Grinder, Cat 1050hp, 1000 hours on remain engine and rebuild, Radio remote, Magnetic head pulley. Weight 98,000 lb Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Diamond Z 5000 -10,200 hours -Belts good -Mill has been serviced -Machine is serviced regularly Turn key unit if the machine needed it the issues has been fixed.

2016 Diamond Z DHZ 7000 -8800 hours -C-32 -Belts good -Mill good -Serviced regularly -Turn key unit Parts have always been changed if needed

Hex 45" Whole Log Metal Detector

DIEHL STRAIGHT LINE RIP

The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive

Diehl Straight Line Rip Saw

MLS Number 10682943 DIEHL SL52 STRAIGHT LINE RIP SAW Bottom arbor 4-1/4"X8-1/2" capacity 15 HP 3,545 RPM arbor drive motor Infeed speed up to 200 FPM Serial# 10/88M-5312-4728 Voltage: 460/60/3 phase Amps: 21.7 Wiring diagram # 2-9000-0026 Was removed from service in November 2020

Diehl SL 50 Straight Line rip saw with adjustable infeed speed controller 15HP 480 volt 14” saw blade feed chain 8 ¼” wide, Table dimensions: 80” x 57” Serial # 65M1297570 We also have available a Diehl SL 52 in our inventory A wooden pallet/crate will be built for shipping at no charge Contact us for price including freight. Can test run saw with video upon request. Stored in our warehouse for prompt delivery.

Diehl SL50 Straight Line Rip Saw 240 volt 3 phase Variable speed control SN: 51108

DIEHL - TFM-68, ...4"; x 8"; 5-Head High Speed Jointed Moulder5-Head (B-R-L-R-T-B) with 8-5/8" x 4-1/2" capacity. Head sequence: Bottom 15 HP, Right 10 HP, Left 10 HP, Right 10 HP, Top 15 HP, and Bottom 20 HP motor.1st Bottom and 1st right side run at 3,600 RPM; all the other spindles run at 6,000 RPM utilizing the included Frequency Changer.Side heads tilt 35° inward and 5° outward. Specifications: -- Spindle diameter: Vertical 1-13/16"; Horizontal 2-1/8" dia. for top spindle only. -- Built-in straight & profile jointers on spindles 2 - 3 - 4 & 5. -- Variable feed speed from 20 - 150 FPM via 15 HP feed drive. -- Cardan Shaft driven. -- WAXLIT Pump and groove bed with groove cutters for 1st bottom. -- Air chipbreakers and feed roll tensioning. -- Starting panel and transformer included.Weight: Approx. 14,000 Lbs

DIEHL - SL 50, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor. -- 16" Blade cap., 2-1/2" max. depth of cut. -- 10" Min. part length. -- 49" Width of table to the right of blade & 26-5/16" to the left. -- 57" x 79" Tabletop size. -- 2 HP Feed drive, feed speed of 65 - 195 FPM.Equipped with & Features: -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over blade. -- Rip fence. -- Push buttons and magnetic starters. -- Floating rip fence. -- Self-adjusting antikickback fingers. -- Full overload & undervoltage protection.

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

DIEHL - SL-52, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM belt driven motor, fixed 2" arbor. -- 14" - 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade; 25" of table to left of blade. --Table size of 78" x 64".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock; 34".Shipping Dimensions: 7-1/2' L x 7' W x 5-1/2' H; weight: 5,000 Lbs.