Complete shaving mill operation for sale. Machinery can be removed or the new owner can lease the current land. - Morbark Peeler/Debarker - Shaving Mill 1: 40"x12.5', 5-Head, Douglas heads, 50 HP per head, extra plate to run 8' logs instead of 12' - Shaving Mill 2: Jackson 8', 2-Head - 20 MM BTU Dust Burner - 12x50 Triple Pass Drum Dryer - 5x10 Rotex Screen - 37 BTU Dust Burner (Came with system, never used) - Piper Knife Sharpener - All controls and electrical - Approx 10 acres of land (under lease) - All material handling and conveyors - Truck scale - Knuckle Boom: John Deere with CTI Buck Saw

Scragg Mill With Edger Cambio Debarker Precision Chipper Shaker Screen

This wood was all removed from an old mill on South Carolina. It is ready to be loaded out.

4' x 6' Table Hand controller ____ capacity

64 ft long 33.5 inch wide 30 in rollers

14" chop saw with 5 stops 70" table 5HP single phase 220v electric motor

3 Belt Conveyors Available: 1. 52 ft long, 42" wide, 36" belt 2. 31 ft long, 42" wide, 38.5" belt 3. 51 ft long, 42" wide, 38.5" belt

6x6" capacity 15hp 480 volts

75 HP 550 Volt 3 phase

3 Guide Milling Machines Good Working Condition Stands Included

USNR 60,000 Board Foot Kilns (10) Available

iDry/Vacutherm Air Vac 2.5 Vacuum Kiln Brand new Weil McLain Boiler Ready to ship!

Vance PT600R8 Drum Chipper See this machine at IWF Atlanta 2024! This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.

The Vantec Wood Wast Drum Chipper is used to produce chips from logs and veneer waste. It has a roller infeed system, rubber conveyor belt and hydro-pneumatic unit to lift the rotor for maintenance. Manufacturer specs: - Width of inlet: 600 mm; - Height: 200 mm; - Rotor diameter: 600 mm; - Toothed roller: 01 upper and 02 - lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical - gears); - Upper Rollers motor size: 5 hp; - Upper Rollers motor size: 5 hp; - Feed speed: 40m/min; - Number of rotor knives: 02; - Wood chip size: 30 - 40 mm; - Chipper screen: size: 65 x 65mm - Main motor 100 hp 4P: Included; Drive panel: Included; - Estimated production: 38 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 650 mm; - Height: 1 .000 mm; - Overall length: 5800 mm; Approximate weight: 2,900 kg.

This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.