The KENT USA SGS-1230AHD Surface Grinder combines proven machine design with advanced technology in control and manufacturing. These precision and reliable 3-axis automatic surface grinders enhance productivity with intuitive easy to use operator controls and low maintenance. Kent USA grinders are one of the most globally trusted brands, with proven long-lasting dependable precision and performance with best in class customer service since 1979. Standard Accessories: - Grinding wheel and wheel flange - Wheel balancing base and arbor - Diamond table dresser base and tip - Leveling bolts and pads - Work light - Toolbox with tools - 12” x 28” electromagnetic chuck and control - Dust-suction coolant system - Overhead parallel dresser Options - SGS-1230AHD - Options Price Acu-Rite 203 Newall DP700 DRO package (2 axis, 0.0001” resolution) $3,680.00 DRO package installation $650.00 Upgrade to Paper filter magnetic separator coolant system $2,800.00 Static wheel balancer $750.00 Extra wheel flange $300.00 An additional temporary $2000 surcharge for Frt. Is in effect $8,180.00

Mixer Direct 304SS Tanks These were installed in a building that has been sold. Except for one tank that was used once, the rest were never put into production. Includes: - (3) 10,000 gal tanks - (3) 15,000 gal tanks with agitators - (2) 1,000 gal high shear mixing tanks with dual motors - (1) Holding tank with agitation (I think this is a 2,000 gal tank with agitator, but I have not gotten up there to look at the tag.

Motoman Robot Refurbished a few years ago. In good working condition.

These are available on a monthly basis: 49” x 22” x ½” Grade: CCX Species: Douglas Fir 34 units available 140 sheets per unit Approx 5,000 sheets per month available

Deuma RF/S150 A-V

This system was purchased new in 2011. It is started up every week for 15 minutes. Ready to be removed. FIRE PUMP 2000 USGPM@ 125 PSI UL/ CONTROLLER GRP-GPU 575/3/60 Note: INCLUDED: FIRE VERTICAL TURBINE FIRE PUMP 2000 USGPM @ 125 PSI , UL/ULC/FM APPROXIMATELY 25' COLUMN ONE TORNATECH 200 HP AUTO TRANSFORMER REDUCED VOLT STARTER C/W AUTO TRANSFER SW MODEL GPR/GPU 575/3/60 NEW WET PIPE SPRINKLER SYSTEM FOR PUMP ROOM C/W CONTROL VALVE & FLOW SWITCH TEST HEADER ONE JOCKEY PUMP SERIES GS MODEL 150H20-8, 100 USGPM@180 PSI ONE HOSE RAACK C/W 50 ' HOSE WALL HYDRANT CONNECTION FOR FIRE DEPARTMENT SEISMIC INSTALLATION DRAWINGS C/W HYDRAULIC CALCULATIONS

Punches, shears amd bends sheet metal totally automatically without any intermediate handling. Feeds with tower as pictured. CNC controls 460 volt 3 phase Recently replaced parts: - Complete punch head assembly - P2R assemblies (2) - Servo Motors for P2R (2) - Complete Drive – Power Supply - Loading Belts on material tower - Low Pressure Hydraulic Pump - High Pressure Hydraulic Pump - Electric Motor for Hydraulic Pumps - Water Chiller - Shear Blades - All Accumulators on hydraulics Available Early September 2023

2004 Sennebogen 835 recently refurbished

2007 Weinig Powermat 400 6-Head Moulder 2007 Weinig R960 Profile Grinder Weinig Measuring Stand HSK heads Radial head controls More info coming!

2007 Weinig Powermat 400 6-Head Moulder 2007 Weinig R960 Profile Grinder Weinig Measuring Stand HSK heads Radial head controls More info coming!

60” x 96” table Vertical Linear Motion option 460 volt 3phase includes 5’ x 5’ 10,000# capacity scale as seen on table Approx 20 hours on machine

Viking Model 304C Pallet Nail Specs (to be confirmed): - Produces upwards of 500 pallets/Shift - Single Operator Machine - 3 Stringer Standard - 60" Standard Stringer Length - Automated Pallet Turnover - Automated Stacking - Hydraulic Nailing - Newer PLC and Display ( 22K Upgrade )

Viking Model 304C Pallet Nail Specs (to be confirmed): - Produces upwards of 500 pallets/Shift - Single Operator Machine - 3 Stringer Standard - 60" Standard Stringer Length - Automated Pallet Turnover - Automated Stacking - Hydraulic Nailing - Newer PLC and Display ( 22K Upgrade )

This plant was set up as a test site for a an oil company that was using steam to extrude oil from the ground. The equipment needs to be moved, as the land it is on has changed owners. Basic listing information: Biomass plant dries wood (and other fuels) and feeds a burner to make steam. Fuels include: Wood, crops, manure and straw. The unit claims to have 80% efficiency. System consists of fuel receiving, handling, preparation biomass to steam energy conversion and all material handling equipment. Basic equipment list: - Fuel receiving: West Salem (WSM) unloader and conveyor - Screening/Separation: WSM Metal Detector, Eriez 18" Magnet, BMM 3'x8' double screen, WSM 100 HP Grinder, Kice Baghouse - Wet Fuel Feed: WSM fuel bin, metering bin, drag chain, feed diverter - Heat System: Dryer meter screw conveyor, rotary airlock, feed screw conveyor, 12' x 48' single pass dryer, inorganic separator - Fuel separation cyclone with magnet, dryer fan, dryer baghouse, rotary airlock, baghouse cleaning fan - Dry fuel storage bin, agitator, rotary air lock, screw conveyor, belt feeder, baghouse - Gas burner 25 MM BTU, FGR fan, fuel conveying air fan

Tilt Hoist

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Vollmer CP650 Recently Taken Out Of Service Well Maintained

Vollmer CP650 Recently Taken Out Of Service Well Maintained

Liebherr L 564 Loader as pictured