Edge band thickness 0.4 – 8mm (0.016" - 1/4” ) Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC) Edgeband height 12 - 65 mm (1/2" – 2 9/16 ") Panel length min. 160 mm (6 3/8") Panel width min. 65 mm (2 3/8") Panel thickness - min. 8 mm (5/16") - max. 60 mm (2 3/8") Feed speed – 11 m/min. Internal modem for remote diagnostic link. Smooth upper pressure rollers. Automatic feed track lubrication system. First pressure roller driven and three idle pressure rollers. Double motor end trimming unit. Program controlled indexing from straight to bevel end trimming. Fine Trimming Station: Top/bottom (2) motors, 0.35 kW (0.50 HP) 12,000 RPM, bevels 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels. Radius Scraping (PVC): Top/bottom with pneumatic control, pvc scrape collection box. Buffing Station: Top/bottom (2) motors, 0.09 KW (0.125 HP) 1,400 RPM.

Brandt KDN 770 2C Machine has been removed from service. Owner claims it is ready to run! Specs (to be confirmed): Hot Melt granulate quick heat-up glue system, overhead glue tank for easy maintenance & glue color change. Automatic magazine for strip & coil (large 800 mm dia. coil table to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine. (1) Drive plus (3) idle rolls "pneumatically controlled" pressure sections. End Trimming: 0.33 HP - 12,000 RPM Motors, chamfers 0° - 15°. Flush Trimming: Top & bottom, bevels 0° - 15° with (4) revolver type index pre-sets, (2) 0.5 HP - 12,000 RPM motors, cutter heads with insert knives. Fine/Radius Trimming: Top & bottom, bevels 0° - 15° with (4) revolver type index presets (0.5 HP - 12,000 RPM motors), cutter heads with insert knives for 3 mm PVC radius. 2 motor corner rounding Scraping Unit: Top & bottom for 2 - 6 mm radius, pneumatically controlled blowoff nozzles. Buffing Unit: Top & bottom buffing (0.25 HP - 1,400 RPM motors). Variable feed chain track speed from 8 - 20 MPM (26 - 65 FPM), 2 HP feed drive.

Brandt KDF 440C Edgebander

Brandt KF 76F Edgebander: Pre-milling, top/bottom trim, buffing, extra glue pot

2008 Brandt Edgebander 230Y/133V 3 Phase Currently in Production

Great Condition Recently Fully Serviced Profile Scrapers and Surface Scrapers No Premill/No Buffers

Brandt KDF 650 Edgebander

2007 Brandt KDF 680 Single sided Edgebander with Pre Milling and Corner Rounding

Brewco Pop Up Saw 6x8 capacity 20” blade infeed and outfeed rolls

Brewco 8x10 Speed Cut Pop Up Saw 10” infeed and 20” outfeed rolls New 24” blade

Brewco 2 Head Cutoff Saw 32” blades, 25 HP motors, 24” waste pan and no belt or drive, was cutting ties 4 strand deck, 11’ wide and 19’ long and unbolts in middle for shipping 3 HP heavy gear box, heavy deck, only 3 chains Ready to load

This system is no longer needed at the current facility. Ready for immediate removal! - Brewco Wolf Resaw - 4" Blade; 20'4" Long - 40" Bandwheels - 40 HP Main Motor - 10 HP Hydraulic Feed - McDonough Style Guides - Some spare blades - Head moves up/down, not the bed - Approximate dimensions: 9'L x 10'W x 6'H - Also available separately: - 8' Infeed Belt - 16' Outfeed Rollcase

Brewco 1600 Single Head Run Around

Brewco B1600 Grade Resaw Complete run-around system 16"x16"x16' Capacity Board separator System has been dismantled and is ready to ship.

Brewco 4-Head Resaw Seller has a hydraulic unit to go with the machine. No controls. Optional: System can be cleaned up and controls added PER SELLER: this machine is able to pass 7.75" cants it was purchased in Nelson BC 20 years ago it has not run since it is ready to go but has only on off switches and no motor starters per se I have not pulled the machine out to clean and paint and get ready to move it needs cleaned/ painted/ starters for 4-20hp motors/ small hyd unit for feed belt and feed rolls nice machine, I have not operated it but was running when I bought it and has been under cover since will need 5 starters, and a small hyd unit 5 hp, which i can provide this machine is easy to get ready if we have a commitment

Brewer 3-Head Resaw (2) 20 HP motors and (1) 30 HP motor 1-Spare set of re-crowned band wheels

2000 Brewer Golden Eagle Single Head Resaw Return 12x12 Throat Opening

Brewer 5-Head Resaw Return Belt

Brewer 3-Head Resaw Model # BR-3B8X12R

2007 Burkle Multifoiler M8