Holzma OPT.HpPS81/38 Panel Saw

As Taken From Service: Includes return conveyor

Homag BST 500

Homag BOF 311/37/15/R CNC Router Specs (to be confirmed): Homag "Vantage 12L" CNC Router Aluminum router table 60" x 144" working area Gridded Pneumatic reference stops Vacuum gauges Foot pedal control Drill unit Nine (9) vertical spindles One (1) horizontal spindle (two outlet) in X axis One (1) horizontal spindle (two outlet) in Y axis Router 16 HP HSK (quick-change) CW/CCW rotation Variable RPM Ten (10) position rotary tool changer Sound enclosure Front safety mats Safety fencing with interlocked access door Controller Flat screen monitor Standard keyboard and mouse Remote control pendant Also included: Laser projecting unit Ceiling mount

Homag KAL 310 Ligmatech Return Conveyor Grooving unit

Optimat KFL 526/6/A3/30 Wiring Diagram: 0-202-09-5610 SOO Supply: 480Y277 3 Phase - 60HZ Largest Motor: 13A Largest Heater: 8A Enclosure Type: 12

Optimat KFL 526/6/A3/30 Wiring Diagram: 0-202-09-6535 Supply: 480y/277V 3 Phase - 60HZ Largest Motor: 13A Largest Heater: 6A Enclosure: 12

Maximum workable width of 24.02 inches (610 mm) Maximum workable length of 98.43 inches (2500 mm) Maximum workable height of 51.18 inches (1300 mm) Minimum working height of 9.84 inches (250 mm) It includes a preloading conveyor and an offloading conveyor, each measuring 118.11 inches (3000 mm) in length. The system is equipped with an NC21 Homatic Controller for precise operation. The main machine section weighs 21,385 pounds (9,700 kg), ensuring robust performance for heavy-duty tasks.

Hundegger K2i machining center: Fully automatic wood input with input roller conveyor and input and sliding cross conveyor Working width / Also Working thickness 20 - 450mm. Max. Element length 13,56m Under-table tilting cross-cut saw Universal milling unit – 4-axis (UF4) Combi support for vertically working tools Drilling device (2.2 kW) – drilling direction vertical Combi support for horizontally working tools Drilling device (2.2 kW) – drilling direction horizontal Marking tool (rear or on the user side) Fully automatic element rotation – hydraulic Transport and positioning system “two-hand system” Electronic connection Roller conveyor for removing wooden elements with punch 5-arm storage table Safety device Higher quality upper surface of the machine Extension of the K2i frame to 13.56 m 5-axis universal milling unit - UF5 (upgrade to 4-axis) Remote maintenance (including portable video camera) Dovetail milling machine (with rotating knives) 60x28x16.5 Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees Universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill Combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm Combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm Positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. The processed material can be automatically rotated Tolerance +/- 2 mm over a length of 13 m

Three systems available. Pricing will include removal and loading onto trucks. - Hurst Hybrid 600 HP 150 PSI - Hurst Hybrid 200 HP 150 PSI - Hurst Hybrid 300 HP 150 PSI Each system should include (email for specifics): Hurst Hybrid Vessel Hurst Boild Furnace with cast grates Hurst underfeed stoker system Hurt Metering conveyor system Overfire air combustion fan Underfire air combustion fan Hurst combustion air preheater Access platforms with ladders Boiler system control panel (PLC, frequency drives, UDC, control for automatic operation)

Used 1995 Hurst Hybrid Boiler system 200 HP 150 PSI 1– Hurst Hybrid Boiler 200 HP 150 PSI Boiler 1 - Hurst Boiler 200 HP Woodfired Furnace for Boiler vessel with cast iron grate system. 1 – Deaerator Tank 1 – Blowdown Separator for fuel storage equipment 1 – 8” Underfeed stoker System 1 – 10” Metering Bin Screw Conveyor with Hopper 1- 20HP Over fire air combustion fan 1- 15HP Under fire air combustion fan 1- Hurst multi-cyclone collectors 1- Induced draft fan

Hurst Boiler System 1. 1- Used1995 200HP 150 PSI Hurst Hybrid Vessel 2. 1- Used 1995n refractory lined boiler furnace 3. 1- 8” underfeed stoker system 4. 1- 10” Fuel feed metering conveyor system 5. 1- Overfire air combustion fan with ductwork 6. 1- Underfire air combustion fan with ductwork 7. 1- Multi cyclone flyash collector 8. 1- Induced draft fan with exhaust stack 9. Muti cyclone and ID fan support steel with legs 10. Access platforms to boiler with ladders 11. Hurst open vented feedwater tank with 2 Grundfos feedwater pumps and control panel 12. Blowdown separator 13. Hurst Boiler control panel 14. Boiler piping parts 15. Boiler electrical parts 16.Equipment loaded onto trucks Optional: Fuel handling and storage supply system: Walking floor Vibrating Screen Screw conveyor Controls

600 hp 300 psi Hurst Hybrid boiler system. 1996 year model Equipment Included: 1- 1- Hurst 1996 Hybrid Boiler 2- 1- Hurst woodfire furnace box 3- 1- Hurst 12” metering conveyor system 4- 1- Overfire air combustion fan 5- 1- Underfire air combustion fan 6- 1- Hurst combustion air preheater 7- 2- Hurst multi-cyclone collectors with rotary air lock 8- 1- Flyash Duct 9- 1- Induced draft fan with exhaust stack 10- Access platforms with ladders 11- Boiler and collector system support frame and legs 12- Boiler system control panel (PLC Controller, frequency drives, UDC) 13- Under feed fuel stoker system with cast iron grate system. 14- 20,000 lbs/hr DA Tank with two 15 HP Grunfos Pumps 15- Rear Injection Fan

2004 Hymmen Proficoater 60" Roll Coat Line - Model ULX-S: Includes spare drum and lights SCMI Finish Sander

IMA Combiform I/R75/1260/V

Edgeband Thickness Max: 3 mm Thickness of Coiled Edgeband Max: 3 mm Suitable for PUR glue Premilling unit Corner rounding unit: 2 motors Scraper unit: Profile and flat Aggregates actuated by control: NC-axes Machine length: 10.400 mm Control: IMA ICOS OPEN COMPACT Workpiece return: Yes Edgeband Height Max: 65 mm Workpiece Length Min: 150 mm Workpiece Width Min: 65 mm Electromotoric height adjustment Top pressure by belt Feedrate max: 30 m/min Preheating zone Continuously variable feed Places in Coil Magazine: 2 Spraying Device Trimming Saw: 2 motors Flush/radius/chamfer milling units: 1 Buffing unit Type: Left-side Machine Space Required: Length: 13.700 mm Width: 5.550 mm Height: 2.400 mm IMA 08.378 Premilling unit IMA 08.42 Cutting aggregate IMA 08.055 Milling aggregate IMA MFA 08.348 Multiple machining aggregate IMA 04.1570 Gluing aggregate IMA 08.519 Profile scraper aggregate IMA 08.521 Duplex flat scraper

IMA Bima 810 V

Specifications comming

IMA BIMA-610, 4' x 16’ CNC MACHINING CENTER , (1998), (460/60/3 electrics), S-4535 General Specifications: - 10 HP, 230/460/60/3 tool-changer type router spindle - (12) station traveling rotary tool changer - (1) 7-spindle & (1) 5-spindle point-to-point vertical drill blocks - X & Z axis ball-screw & Y-axis rack & pinion - Adjustable pod and rail system, (10-rails with pods) - Can include a 4’ x 8’ “universal” flow vacuum table for nested base processing - Integrated scrap conveyor under/through the working area - IMAWOP, (Windows workshop-oriented PC programming system) - Hand held start/stop spindle speed control - 3 HP Becker vacuum pump for the pod & rail side - Includes computer, an aggregate horizontal boring unit, and additional tooling - Note: the retrofitted nested base table is not included - 25' long x 9'8" wide x 8' tall

Industrial Woodworking JFS25 Finger Joint Line Ultimizer Saw Ap-Quip glue system Ace-Co Hydro heads and setup stand.