STANMAC SPRAY 300 Moulding Sprayer The Stanmac "Spray 300" is ideal for linear profiles in a wide range of materials and capable of utilizing both waterborne and solvent-based coatings including stains, paints, and lacquers.Spray guns are automatically timed for the start and stop of the spray cycle to ensure the best spray efficiency. The overspray is captured by the spray trough and can be recovered while atomized spray is captured by fiberglass media and clean air is exhausted from the spray cabin.Can be fitted with spray gun packages to include conventional, air-assisted airless, and airless to suit your requirements.Specifications: -- Workpiece max. width: 12"; -- Workpiece min. length: 30" -- Feed Speeds: 30 - 150 FPM -- Feed Motor: 0.5 HP -- Extraction Fan: 3.0 HP -- Number of Spray Guns: 3 -- Recovery Troughs 1 -- Spray Gun Trigger: Electronic Switch -- Piece Counter: Digital -- Filter Media: Replaceable fiberglass media

STAR V MACHINERY - SCG-1600: Automatic Cross Groover -- Specifications(1) Spindle with: 12 HP - 3,600 RPM Motor; 60" max. crosscut cap.; material thickness: 0.25" - 1.125".(1) Internal 60" stroke Tape Applicator Station. -- 96" Stroke Servo motor driven Rear Pusher Fence (full 60" rear table width); 96" long x 20" front table with: (5) Digital manual stops. -- Rear Fence Movement, Cutter forward Speed Cut/Tape Stroke and All Controls for Start/Stop, On/Off, Axis position Displays on 10" Touch Screen Panel HMI. -- Grooving head up & down movement via pneumatic cylinder with: Linear rail & linear bearings; depth fine adjustment with special threaded adjustable unit. -- Carriage cross travel powered by: 3 HP Hydraulic motor (4 GPM); driven ball screw with: Linear rail & linear bearings; feed rate: 0 - 40 FPM; Heavy-Duty welded frame construction. -- Complete with:Safety guards & cutter guards; pneumatic support fence; (1) Heavy-Duty infeed/outfeed roller tables. Available options at additional cost below:Accessories, Tooling & Tape: Choose and add to machine base price. Cove Corner Plug Jig: ...$ 575 ea. Brazed carbide 90° cutter for up to 1/2" solid surface: ...$ 745. Please specify the material. Brazed carbide cove backsplash cutter for 1/2" solid surface: ...$1,265 ea. Please specify 3/8" or 1/2" radius. Brazed carbide 90° cutter for up to 3/4" wood materials: ...$ 940.00. 90° Insert cutter for up to 1/2" thick material (body only): ...$1,265.00. Requires below inserts.......90° V-Insert for up to 1/2" thick material: ...$32 ea. min. of (12) inserts required: ...$ 384.......Carbide insert cove backsplash cutter head for 1/2" material (body only): ...$1,590 ea. Please specify 3/8 or 1/2 Radius.Requires Below Inserts:......3/8" Cove radius insert for 1/2" thick material: $42 ea. Min. of (12) inserts required. ...$ 504. ......3/8" Double 45° insert for 1/2" thick material: $42 ea. Min. of (12) Inserts required. ...$ 504.......PCD Diamond 90° cutter for up to 1/2" thick material $3,485 ea.......PCD Diamond cove cutter with 1/2" radius for 1/2" thick material: $ 5,645.00 ea. Roll of VAC2MG: 2" (50 mm) wide; 1,025 y (937 m) long roll V-Groove tape: $ 245. ea.& Minimum of (3) rolls per order = $735. -- Actual Model: STAR V MACHINERY - SCG-1600: Automatic Cross Groover

STAR V MACHINERY SLG-2000 36 LINEAR V-GROOVER: -- SpecificationsWorking table dimensions: 120" Long x 36" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" (355/622 mm). -- Equipped with: (2) Independent 10 HP - 3,600 RPM saw motors with: "Servo" control adjustment in "Y" axis & manual "Z" axis adjustment.30 mm Dia. arbor x 76 mm (3") clamping length to accommodate wider cove backsplash, triple fold profiles, or using it for hogging and finish cut; 9-1/4" (235 mm) max. cutterhead dia.(1) Saw motor mounted on the front & (1) Saw motor mounted on the back of the 8" x 12" x 1/2" heat treated steel Heavy-Duty overhead support beam.Side-to-side head travels via linear rails & bearings; manual head height adjustment via linear rails & bearings. -- Feeding System(1) 3 HP Variable speed drive belt system with: "Servo" height adjustment; feed rate: 0 - 45 FPM (12 MPM); belt feeder moves workpiece on a precision "aluminum" roller table. -- Tape Applicator (2) Automatic Tape Applicators with: "Servo" adjustment according to the Saw motor position in "Y" axis. -- Operator Interface10" HDMI Touchscreen display for: Start/Stop, On/Off, Feed Speed & Axis Position. -- Complete with:Safety guards and cutter guards; Anti-Kickback Device; Emergency Shutoff line.Dust Collection requirements: 4,200 CFM; Collector outlets on cutter guards: 5" in dia. -- Actual model #: STAR V MACHINERY SLG-2000

STAR V MACHINERY SLG-2000 48" LINEAR V-GROOVER: -- SpecificationsWorking table dimensions: 120" Long x 48" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" (355/622 mm). -- Equipped with: (2) Independent 10 HP - 3,600 RPM saw motors with: "Servo" control adjustment in "Y" axis & manual "Z" axis adjustment.30 mm Dia. arbor x 76 mm (3") clamping length to accommodate wider cove backsplash, triple fold profiles, or using it for hogging and finish cut; 9-1/4" (235 mm) max. cutterhead dia.(1) Saw motor mounted on the front & (1) Saw motor mounted on the back of the 8" x 12" x 1/2" heat treated steel Heavy-Duty overhead support beam.Side-to-side head travels via linear rails & bearings; manual head height adjustment via linear rails & bearings. -- Feeding System(1) 3 HP Variable speed drive belt system with: "Servo" height adjustment; feed rate: 0 - 45 FPM (12 MPM); belt feeder moves workpiece on a precision "aluminum" roller table. -- Tape Applicator (2) Automatic Tape Applicators with: "Servo" adjustment according to the Saw motor position in "Y" axis. -- Operator Interface10" HDMI Touchscreen display for: Start/Stop, On/Off, Feed Speed & Axis Position. -- Complete with:Safety guards and cutter guards; Anti-Kickback Device; Emergency Shutoff line.Dust Collection requirements: 4,200 CFM; Collector outlets on cutter guards: 5" in dia. -- Actual model #: STAR V MACHINERY SLG-2000

STAR V MACHINERY SLW-4818 SLAT WALL GROOVING MACHINE: -- Specifications48" wide panel capacity, feed through style overhead milling Slatwall machine. The machine will produce 4' x 8' panels in portrait orientation or any orientation as long as the panel size does not exceed 4' x 4'.The panels are placed with side to be grooved, facing up, then pushed in between the fixed fence and a movable fence, until the panel is grabbed by the first rubberized feed roller, the panel is then transported between a number of pinch rollers and processed through 3 rows of high-speed spindle motors.As the T Slot cutting is processed each bank (6 in total) of 3 high speed spindle motors cut a T shaped groove appropriate to the size of tool installed in each spindle, blow the groove clean by use of high-speed air knives, and remove dust through a number of dust ports. Then pinch rollers push the sheet out of the machine roller bed.Panels as narrow as 6" wide can be fed through the machine although workpieces less than 3/8" thick must be 48" wide. Workpieces as short as 24" can also be fed through the machine safely.Minimum recommended workpiece width, 6": Maximum workpiece width, 48": Minimum recommended workpiece length, 24": Maximum workpiece length, UNLIMITED: Maximum workpiece height, 1.5". -- Features:5HP 1750RPM, 460V Feeder Drive Motor through 50:1 Gear Box. 5HP VFD Inverter to drive and control feed speed through machine, 0-50 linear feet per minute. Heavy Duty Welded Tubular Steel Frame Construction. Stainless Steel Roller Bed with Rollers 6" on Center. 10x Linatex Rubber coated Feed Pinch Rollers Driven by 5Hp Feed Motor and Drive. Fixed Guide Fence& Movable fence to aid feeding of sheets into machine. Safety Fence around both sides along the length of the machine, with 1 gate in each side, each with safety interlock. Safety photo eye in infeed and outfeed side of the machine. Gauge block for setting height of router arbors. -- Spindle Motors:18 x 3 kW (4 HP), 18,000 RPM, 230V, High Speed Spindle Motors. 100 HP VFD Inverter to drive and control rotational speed of all 18 spindle motors.Variable RPM of Spindle Motors through Potentiometer and RPM displayed on Control Panel. Individual Ammeter for each Spindle on Control Panel. 6 x banks with 3 x High Speed Spindle Motors per bank (18 Total Spindle Motors). All 6 Spindle Banks are adjustable on the Overhead Beams by Hand, and lock into Position via locking handles. Digital Read Out for horizontal position of each spindle bank. Spindle 1 on each bank is fixed horizontally, Spindles 2, and 3 adjust on each bank horizontally. All 3 spindles adjust individually vertically on each spindle bank via Hand wheel. Position of depth on Digital Read Out.All Spindle raised individually through pneumatic cylinder for changing tooling, or when not in use. Each Bank has a phenolic Hold Down Shoe.Spindle Centers adjust from 3" to 4" Centers; Rapid Center Adjust Switch, from 3" to 4" through Air Cylinders against positive s

STAR V MACHINERY SLW-6018 SLAT WALL GROOVING MACHINE: -- Specifications60" (5') Wide panel capacity, feed through style overhead milling Slatwall machine. The machine will produce 5' x 8' panels in portrait orientation or any orientation as long as the panel size does not exceed 5' x 5'.The panels are placed with side to be grooved, facing up, then pushed in between the fixed fence and a movable fence, until the panel is grabbed by the first rubberized feed roller, the panel is then transported between a number of pinch rollers and processed through 3 rows of high-speed spindle motors.As the T Slot cutting is processed each bank (6 in total) of 3 high speed spindle motors cut a T shaped groove appropriate to the size of tool installed in each spindle, blow the groove clean by use of high-speed air knives, and remove dust through a number of dust ports. Then pinch rollers push the sheet out of the machine roller bed.Panels as narrow as 6" wide can be fed through the machine although workpieces less than 3/8" thick must be 48" wide. Workpieces as short as 24" can also be fed through the machine safely.Minimum recommended workpiece width, 6": Maximum workpiece width, 48": Minimum recommended workpiece length, 24": Maximum workpiece length, UNLIMITED: Maximum workpiece height, 1.5". -- Features:5HP 1750RPM, 460V Feeder Drive Motor through 50:1 Gear Box. 5HP VFD Inverter to drive and control feed speed through machine, 0-50 linear feet per minute. Heavy Duty Welded Tubular Steel Frame Construction. Stainless Steel Roller Bed with Rollers 6" on Center. 10x Linatex Rubber coated Feed Pinch Rollers Driven by 5Hp Feed Motor and Drive. Fixed Guide Fence & Movable fence to aid feeding of sheets into machine. Safety Fence around both sides along the length of the machine, with 1 gate in each side, each with safety interlock. Safety photo eye in infeed and outfeed side of the machine. Gauge block for setting height of router arbors. -- Spindle Motors:18 x 3 kW (4 HP), 18,000 RPM, 230V, High Speed Spindle Motors. 100 HP VFD Inverter to drive and control rotational speed of all 18 spindle motors.Variable RPM of Spindle Motors through Potentiometer and RPM displayed on Control Panel. Individual Ammeter for each Spindle on Control Panel. 6x banks with 3x High Speed Spindle Motors per bank (18 Total Spindle Motors). All 6 Spindle Banks are adjustable on the Overhead Beams by Hand, and lock into Position via locking handles. Digital Read Out for horizontal position of each spindle bank. Spindle 1 on each bank is fixed horizontally, Spindles 2, and 3 adjust on each bank horizontally. All 3 spindles adjust individually vertically on each spindle bank via Hand wheel. Position of depth on Digital Read Out.All Spindle raised individually through pneumatic cylinder for changing tooling, or when not in use. Each Bank has a phenolic Hold Down Shoe.Spindle Centers adjust from 3" to 4" Centers; Rapid Center Adjust Switch, from 3" to 4" through Air Cylinders against positi

STAR V MACHINERY SLG-2000 36 LINEAR V-GROOVER: -- SpecificationsWorking table dimensions: 120" Long x 36" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" (355/622 mm). -- Equipped with: (2) Independent 10 HP - 3,600 RPM saw motors with: "Servo" control adjustment in "Y" axis & manual "Z" axis adjustment.30 mm Dia. arbor x 76 mm (3") clamping length to accommodate wider cove backsplash, triple fold profiles, or using it for hogging and finish cut; 9-1/4" (235 mm) max. cutte-rhead dia.(1) Saw motor mounted on the front & (1) Saw motor mounted on the back of the 8" x 12" x 1/2" heat treated steel Heavy-Duty overhead support beam.Side-to-side head travels via linear rails & bearings; manual head height adjustment via linear rails & bearings. -- Feeding System(1) 3 HP Variable speed drive belt system with: "Servo" height adjustment; feed rate: 0 - 45 FPM (12 MPM); belt feeder moves workpiece on a precision "aluminum" roller table. -- Tape Applicator (2) Automatic Tape Applicators with: "Servo" adjustment according to the Saw motor position in "Y" axis. -- Operator Interface10" HDMI Touchscreen display for: Start/Stop, On/Off, Feed Speed & Axis Position. -- Complete with:Safety guards and cutter guards; Anti-Kickback Device; Emergency Shutoff line.Dust Collection requirements: 4,200 CFM; Collector outlets on cutter guards: 5" in dia. -- Actual model #: STAR V MACHINERY SLG-2000

STATE - B-4, ...Oscillating Spindle SanderSpecificationsTilting table design with pedestal floor mount.Table size: 20" x 24".Table height: 40".Table tilt: 15° Up; 45° down.Spindle speed: 1,725 RPM.Vertical oscillation: 1-5/8".Oscillations/Min: 90.Lubrication: Oil bath splash. -- Heavy-Duty 1/2 HP motor; maintenance free; 1,725 RPM; TENV totally enclosed non-vented motor; rated for continuous operation; assuring long term dependable service. -- Safe operator controls; magnetic motor starter with overload protection for save installation.All controls mounted for operator convenience. -- Operator friendly handwheel tilting Engineered worm gear design allows table to be tilted 15° up & 45° down relative to spindle.Easy-to-read scale allows for accurate tilt determination before engaging locking device. A tapered pin locks the table during horizontal sanding operations. -- Safety features: Magnetic motor starter with overload protection; safety labels; well-placed ergonomic controls; 3-throat rings to minimize table-to-spindle clearance; POSITIV-LOK spindles provide safe & quick means of changing spindles. -- Recently cleaned, checked; electrical contacts cleaned; machine partially disassembled cleaned; reassembled & tightened; oil sight glass replaced.Weight: 280 Lbs.

STATE D-30 DISC SANDERDynamically balanced 30" steel disc.Commercial duty direct drive 5 HP motor.Heavy cast iron 14" x 38" table w/miter gauge slot.Easy precise rack and pinion tilting of the work table with 45° down and 30° up.Motorized Rack and pinion adjustment of the table rise & fall. Sanding station is mounted to (2) 3-1/2" heavy columns.Heavy bolt-down cast iron base.

STEEL FAB 400 Gallon Vertical Air Receiving TankSpecifications: -- Tank size 36" Dia. x 6' H.

STEFANI ONE TOUCH HEAVY DUTY PRODUCTION EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + PUR/EVA Gluing Technology: -- Basic Specifications: Minimum Panel Spacing 24.625" (630 mm) between panels; Edge Thickness capacity 0.015" - 0.875 (0.4 - 22 mm); Panels thickness (min/max) 0.375" - 2,36" (10 - 60 mm);Minimum Panel Length 5.5" (140 mm), or 8.625" (220 mm) when "Corner Rounding; Processing Track Speed min/max 40 - 82 FPM (12 - 25 MPM) variable feed speed.FRONT-END EQUIPPED WITH: -- 2-Roll/Station Vertical Coil Magazine with "Automatic" change-over. Infeed Panel Heating Lamps. Spraying unit (Anti-sticking liquid). -- Pre-Milling: 4 kW (5.3 HP) - 12,000 RPM x 2 motors, with Diamond Tooling; -- Gluing System: "No-tool" "Quick-Change", Teflon coated Glue Pot; Electronic Controlled "Quick Melt" system with auto Kick-down."PU-BOX L" Gluing Unit Pre-Melting system with "Melt on Demand" for managing both EVA & PUR glue. all managed form the PC control.This unit "INCLUDES" the SPG Glue pot for PUR + the standard glue pot for EVA. "SPG" Glue Pot for managing both EVA & PUR Glue, capable of emptying the glue pot in 8-minutes, through the PC controller & can be disassembled in less then 10-minutes for cleaning & maintenance. -- Pressure Section: PC Servo Controlled with (1) large dia. clutch controlled drive roller and (5) pneumatic pressure idle rollers with opposite tilt traveling on THK guides, all rollers have "JUMP" capacity.Heavy-Duty Guillotine. 35 mm dia. Reversible glue roller for solid wood application, with clamping device to eliminate any glue transfer on the trailing edge.WORKSTATIONS: -- Top Mounted End Trimming:0.8 kW - 12,000 RPM Motors x 2; Motors Automatic Blade tilt from 0° - 22° on horiz. plane. -- Flush Trimming "R-E": "UPGRADED" 1.84 kW - 12,000 RPM motors x 2, Top & Bottom flush trimming station. -- Multi-Edge Finish Trimming: 1.1 kW - 12,000 RPM motors x 2; Top & Bottom bevel/radius trimming station with up to 30° tilt; NC controlled "Multi-Edge" kit for (3) automatic position, straight, 1mm radius & 2mm radius, preset through controller. -- Corner Rounding: (4) Motors (0.35 kW - 12,000 RPM each); 2-postition (1 & 2 mm radius) preset trimming through controller. -- Profile Scraping: NC Controlled, Top & Bottom profile scrapping units with 2-postition (1 & 2 mm radius) adjustment through the controller; PVC shavings collection box; air pressure nozzle to support removal of scrap. -- Glue Scrapers:Top & Bottom pneumatic controlled, flat scraping knives with bearing guide-wheels. -- Hot Air Edge Brightener:To re-embellish the color & help eliminate scrapper marks -- Oscillating Buffing Unit: 0.3 kW - 1,500 RPM motors x 2; Top & Bottom oscillating buffing wheels for cleaning/finishing material edges; units tilt 0° - 10° to prevent wear grooves in the buffing wheels.Operator Interface: -- Stefani "StarTouch" + Windows "XP" operator interface, with NC controlled adjustment for all working units.17' TFT screen; ETHRENET Network c

STEFANI KD-R EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): + EVA or PUR Glue System. -- Specifications:0.4 - 12 mm edgebanding cap., panel thickness (min/max) 10 - 60 mm (0.375" - 2.375"); panel width min 51 mm (2") panel length min 140 mm (5.5") variable feed speed 10 - 20 MPM (33 - 66 FPM), min distance between panels: 610 mm (24";). -- Front-End equipped with: Air Cushion infeed table, to facilitate insertion of large dimension workpieces, table dims are 1,600 mm x 600 mm.Infeed Fence with a mechanical digital indicator to position the fence and determine the stock removal.It is also equipped with a pneumatic panel spacing device to prevent the operator from feeding the panels to close to one another. -- Pre-Milling:Pre-Milling unit with (2) 4 kW (5.3 HP) - 12,000 RPM motors with jumping action controlled through the PLC.The cutting heads are adjustable vertically. The unit is equipped with copying devices which guarantee that material removal is consistent on long or slightly out-of-square panels.64mm Tall diamond pre-mill cutters with replaceable inserts. -- EVA + PUR Gluing System:Quick Melt system with approx. 8 - 10-minute heat up time. Includes an SGP "QC" Glue pot with less than 1-minute change-over time. Double Thermo Regulation for easy use of both EVA and PUR glue. Color change and glue pot cleaning are able to be completed in minutes, as opposed to hours.An automatic temperature kickdown feature extends glue life and reduces glue scorching. Reverse rotation of the glue roller for the application of solid wood.Equipped with "I-Glue", which locks the glue roller in place at the end of the panel eliminating any excess glue. -- Pressure Section:(1) large dia. Teflon coated clutch-controlled drive roller & (3) pneumatic pressure idle rollers with opposing one-degree tilt to provide extra pressure along the top & bottom edge. The pressure section is also equipped with pneumatic jumping, so the unit activates exactly on the leading/trailing edges via the edge detecting sensor that will shut down the feed track when there is no material present to be applied.WORKSTATIONS: -- End Trimming Unit: 0.38 kW - 12,000 RPM (x 2 motors) End Trim units with automatic 0° - 22° on horiz. plane from the machine control with (2) pre-set positions.When operating in conjunction with the corner rounding station the unit is equipped with two position pneumatics to leave the material long, thus allowing the corner rounding unit to have a seamless finish. -- T&B Trimming Unit:Top & Bottom flush trimming, 0.75 kW - 12,000 RPM (x2). Servo controlled, with large diameter vertical and horizontal copying devices with precise digital indicators.The unit is equipped with a servo driven motor to go from one material thickness to another from the controller. -- Corner Rounding Unit: 0.60 kW - 12,000 RPM (x2). The "ROUND-K" Unit is designed to work as an additional set of trimmers for rounding the top/bottom as well as the front/rear corners of work piece with 3mm P

STEGHERR KPP Vertical Edge Gluing Bander; 2,600 mm (102") Working length, 53 mm (2.08") max. workpiece thickness, solid edge material up to 25 mm (1") thick, edge pressure 6 kg/cm (13 Lbs) pressure for the length of 2,500 mm and thickness of 20 mm at 3.5 bar.Specifications: -- Panel and wood strip are positioned into press chamber, maximum edge strip 2" X 1-1/2". -- Foot switch activates the air tube pressing system, and continuous bottom and side pressure evenly distributed over the entire workpiece allows tight glue joints (panel clamping pressure 80 PSI, edge strip clamping pressure 55 PSI). -- Panel heating unit - 850 watts (220 V, 1 Ph) temperature control from 40° - 150° C (104° - 300° F). A moveable clamp gauge positions the edge strip for drop edges or overhangs.Features: -- Special stop gauge allows for the positioning of mitered corners. Average PVAC glue cure time 40 - 70 Seconds.

STEGHERR - BOF, ...Through Feed Arch MoulderAutomatically feeds arched or curved parts for profiling or sanding. Feeds & contours parts with a radius of 6" or more and a max. material height of 3-1/4". Specifications: -- Feeds & contours parts with a radius of 6" or more and a max. material height of 3-1/4". -- (1) 1-1/4" Horizontal spindle at 5.5 HP - 7,500 or 1,500 RPM for sanding. -- 5" - 6-1/4" Tool dia., 4" spindle length capacity. -- 0.33 HP Feed motor, forward & reverse variable feed speed from 3 - 26 FPM. -- Flexible mounted 5-roller system guides and feeds workpiece. -- Simple setup allows for rapid changeover of different widths, no changeover required when machining same profile onto variety of arch radii. -- Complete with: Overhead hood assembly and dust outlet.Machine is currently wired for 220 Volt / 3 Phase power.

STEGHERR KSF-K Beaded Face Frame & Mullion Cross-Joint Milling MachineSpecifications: -- For notching beaded face frames & can be equipped for 90° cross joints & radius grills. -- Min. frame part width 75 mm (2.95").Equipped with: -- (2) 1.1 kW (1-1/2 HP) Cutterhead spindle motors. -- (3) 22 mm Dia. (0.87") Saw Spindles, with Spindle speed 7,200 RPM & hydro-pneumatic controlled feed speeds. -- Foot pedal control.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6p STEGHERR KSF Closed Halving Joint Cutter (Cross Joint Milling Machine) Specifications: Max. width 53 mm (2.09"), Max. depth 72 mm (2.83"). Table size 9-3/4” x 26” x 34” H. Tool dia. (2) 150 mm (5.91") & (1) 180 mm (7.09"). Spindle speeds 6,300 RPM. Equipped with: (2) 2.2 kW (3 HP) - 3.470 RPM Motors. Hydro-Pneumatic table feed. Pneumatic clamping. Fence. Foot pedal control. Complete with 1740 mm (68.50") Length stop gauge.

STEINEMANN OSUS NOVA 160/6 K-FS/NS-OPTIMAT Top and Bottom Calibrating Sander(6) heads consisting in 2 machines, first machine top/bottom opposed head. Secoind machine (4) head with Combi and finishing platenFeatured: -- 2-Head K, (1) top & (1) bottom; both heads directly opposed. for calibrating -- (4) head FS/NS top/bottom first Combi head, second finishing platenSpecifications:First machine Calibrating Sander: -- Top/bottom opposed single head -- Working width 1,600 mm (63") both heads 11" dia. steel contact roll -- Thickness capacity 3 - 150 mm ( 1/8" - 5.9") -- Working height (passline) 1400 mm (55") -- Cutting speed on K head 34 M/sec. (6,667 SFM) -- Tolerance within the board +/- 0,075 mm (+/- 0,003") -- 100 HP motor each head. -- 63" x 103" Abrasive belt size. (to be confirmed) -- Air jet abrasive belt tracking. -- Variable feed speed 7 - 43 M/min. (24' -138"/min.), 20 HP feed motor,. -- Control panel for this machine only Second Machine Finishing Sander: -- Top/bottom (2) head each as Combination drum/platen and finishing platen -- Working width 1,600 mm (63") both heads 11" dia. steel contact roll -- Thickness capacity 3 - 150 mm ( 1/8" - 5.9") -- Working height (passline) 1400 mm (55") -- Cutting speed on FS head 22 M/sec. (4,330 SFM) -- Cutting speed on NS head 22M/sec. (4,330 SFM) -- Tolerance within the board +/- 0,075 mm (+/- 0,003") -- No motor installed -- 63" x 103" Abrasive belt size. (to be confirmed) -- Air jet abrasive belt tracking. -- Variable feed speed 7 - 43 M/min. (24' -138"/min.), 20 HP feed motor,. -- Control panel for this machine Not included: -- infeed and outfeed conveyor -- Conveyor between the machine -- “all the control wiring goes into a cabinet that is separate on each machine. That is just the wiring for the sensors and solenoids for braking and belt tracking stuff. There are no motor controls with these so there are no starters included. The 2 head comes with (2) 150 HP motors and the 4 head has no motors on it. In order to make these operational you would need a PLC and HMI to run the controls and motor starters and would need to buy motor controls

2023 Stema "Alphard" CNC Machine for Drilling, Routing & Tenoning on Doors & Frames Description: CNC haunch/mortise/Tenon/dowel machine for cabinet doors, beaded face frames, full size door mortice/tenon, French miters, dowel insertion. X-Axis w/ 3200mm of Stroke 70 m/min Y-Axis w/ Ballscrew Movement 25 m/min Z-Axis, 25 m/min Ten-Position Automatic Tool Changer/Revolver Tool Changer Allows for Tenoning, Profiling, Mortising, Drilling Haunching Unit (for French Miter Product), 5.5 HP Motor Dowel Insertion Unit (8mm) Vibrating Dowel Hopper Glue Inserting Unit PC User-Interface w/ Windows 10, USB, & 19"; LCD Screen Pegasus Software Total Working Length 3200mm (120") Manually Adjustable Pneumatic Clamps Heavy Steel Frame

STRIEBIG -STANDARD5192-A,...Vertical Panel Saw --Specifications: -- 6-1/4' x 14-1/12' Cap.; 3-1/8" cutting depth; 4.5 HP motor; automatic STAR DELTA starter; 300 mm dia. (11-7/8") blade with 30 mm bore - 4,750 RPM rotation. --Equipped with: -- Shifting panel support grid; auxiliary support channel for tall & narrow parts. -- 12' Retractable center shelf w/adjustable flip down stop; repeat rip gauge with 5-11/12' cap. --Complete with: -- Lower roller panel support system with brakes; (4) each adjustable base & rear supports for freestanding installation.

STRIEBIG - OPTISAW II, ...Vertical Panel Saw Specifications: -- 6-1/4' x 13-3/4' Cap.; 3-1/8" cutting depth; 6.0 HP - 3,450 RPM - 220/440 V motor. -- 300 mm Dia. blade cap. with: 30 mm Arbor; 4,800 RPM blade speed. -- Manual vertical & horizontal movement of saw carriage. -- Automatically moving back support. -- Push button STAR-DELTA starter.Equipped with: -- Retractable center shelf. -- Adjustable flip down stops. -- Repeat rip gauge with: 23-1/2" Cap., lower roller supports for easy positioning of panels.Actual model is: 5192 A, Standard II.