We offer used equipment and sell to customers all over the world. Our focus is on high quality customer service and helping you find the equipment that you need so you can focus on your business or project. If we don’t have something in stock that you are looking for, just let us know and we can find it for you. Not sure what you need? Just give us
29 Results Found
These are super rare and they do not make them anymore. Cat engine runs like a top. 3 speed transmission works excellent. 5,383 original hours. Undercarriage at 80%. Full forestry package. No heat or A/C. Can be added easily enough. Serial# 5WW00194. We can assist with delivery if needed. We do take trades depending on what you have..Feel free to call us as well.
2016 CAT 564 5,600 hours, , set of tracks, exc. Rubber all around, Pre Heater, Heat /A/C, CB Radio, Cat power, Hydrostatic transmission, Sure Grip controls, Joystick steer, Super clean/1 owner, $229,500
2014 CAT 564, Set of tracks, 6,660 Hrs., Cat powered, Hydrostatic trans. shifts perfectly, 710 rubber, Heat, A/C, Pre Heater, Bypass 360 Bucket, Sure Grip controls, $189,500
Very nice working machine. Clean inside and out. 10,740 machine hours. Excellent undercarriage. 3056E Cat engine runs like a top. Rated at 161 HP. Heat & A/C. Reversing Fan. Fire suppression. Model PF-48 4 roller head works as it should. Good track power. All pumps are strong. Machine Serial# is PH00716. Head serial# is PH00718. Width is 8'6" and Height is 11'. We're located in the Western U.P. Please s feel free to call us. We can assist with delivery if needed and we do take trades depending on what you have. Thanks for looking!!
Meter reads 4,497 Hours. Excellent working 4 speed powershift transmission. 6068T Deere power, runs like a top! Rear rubber is 700/50-26. One rear tire is in pretty rough condition on the sidewall. Front rubber is 30.5L-32 rubber. Squirt boom. Heat and A/C. Joystick controls. Good set of tracks included with the sale. Clean inside and out. New paint and decals. New transmission filter and main transmission line and fittings. Fresh fluid. New shift solenoid. All windows and lights are good. Loader works as it should.
2005 Fabtek 546C, complete re-built Cat engine, new rear-end, new jib cylinder, new rotate motor on bucket, 700 rear rubber, 30.5x32 front We may take trades depending on what you have. We can help with shipping costs. Heat & A/C. Hydrostatic transmission, shifts great. New windows. New drive shaft. Recent full service of all fluids and filters. Just over 16,000 hours. Very well cared for and ready to work!!
2004 Fabtek FT133 2004 Fabtek 133 w/4-roller head, new U/C, Deere engine, 13,000 hours, $89,500 - REDUCED
Self propelled. Live Heel. Joystick controls. Deere engine. Only 4,500 hours. Condition is great and this machine is 100% woods ready. 60 Inch Hood Saw table included with the sale. Heat and A/C. Super clean inside and out. Articulation.
Super straight and clean skidder. Strong winch. Excellent running 4 cylinder Deere engine. Manual transmission. Excellent 23.1 x 26 rubber. 6,385 hours. Excellent interior. New paint and decals. Please feel free to give us a call. We can assist with delivery if needed. Thanks for looking! Brand new park brake installed and new front pivot axle as well.
Dual function grapple. 6068H Deere Engine. 30.5x32 rubber. Bear paw chains included. New paint and decals. Good tires. No Air Conditioning. Pins do have some play in them. 39,500 or best offer.
2006 John Deere 903G, Deere engine, FS-22 hotsaw head w/40% tilt,very good U/C, gauge reads 8800 hours, 33" triple bar pads
Only 1,527 original hours. Rotating cab. Super clean and straight inside and out. You don't find them like this! Electric tilt hood. 710/45/R26.5 Nokian tires all in excellent condition. Heat & A/C. Super grip bucket. 6068 Deere engine, no def fluid! BRAND NEW TRACKS INCLUDED!
2007 Deere 1110D, New eng. 3000 hrs ago, Tight loader & center section, Pre Heater, 1 set of tracks, Squirt boom w/G/36 grapple, New Hyd. Mtr. 13,000 hrs., $129,000
Very nice owner operated buncher here. 9,537 hours. Clean inside and out. Heat & A/C. 360 degree rotation head. Cummins power runs excellent! New teeth on cutting disk. 24 inch pads. Good undercarriage at roughly 80%. Quadco head. Model is QFH. Serial number is 21SC163 for head. Preheater. We do take trades depending on what you have. Hydraulics are very strong. Excellent track power. Please feel free to call us as well. We can also assist with trucking if needed. Thanks for looking!!
Nice working forwarder. 100% woods ready. Previously owner operated machine. Super straight and clean inside and out. You would be very hard pressed to find a nicer forwarder for the year. Hours are 16,666. Recent work done and we have the receipts which come up to just under $11,000 dollars. Heat & A/C. Benz engine runs like a top. Hydrostatic tranny works excellent. Fire suppression. Pre Heater. Grill guard and frame lock. CD Player. Front tires are 600/65-34 in 50% or better condition. Rear tires are 600/55-26.5 in similar condition to the front. Seat is like new yet. Nothing to be afraid of here. New paint and decals.
2015 Rottne F15C, one set of tracks, Tier 3 John Deere 6068 Engine, No def fluid!! 5,786 hours, Sure Grip Model 360 bucket, 3 speed Hydrostatic transmission, Heat, AC, Pre Heater, 710/45/26.5 rubber in excellent condition, Squirt boom, $249,500
2005 Timbco 415EX, Rolly II, 70% U/C. - REDUCED PRICE! Processor Manufacturer: RISLEY, Processor Model: ROLLY II
Owner operated buncher. Clean inside and out. Newly rebuilt engine. 8.3 Cummins rated at 215 HP. Leveling cab. Good undercarriage. Heat and A/C. 13,804 hours. 33 inch Timbco barsaw head. Serial# AT4C-1886-120700. Nice straight machine and has been well cared for by same family business for many years. Excellent hydraulic power and final drives are good as well. We may take a trade depending on what you have. Please give us a call!!!! We can also assist with trucking if needed. New paint and decals. Thanks for looking! 24 inch wide pads.
Good working skidder. 6068 Deere engine runs excellent. Transmission shifts as it should. Good working winch. Heat and A/C. 2 sets of Bearpaw chains included with the sale. Dual function grapple. Good rubber. This machine came out of the woods working daily. Woods ready!!
Nice working machine here. Fully serviced and ready to go to the woods! New joystick circuit board. New upper rollers. Couple rebuilt cylinder on good working 762C John Deere processing head. Joystick controls. Timberjack 3000 computer. Parker Hydraulics. Extendaboom. Heat & A/C. 5.9 Cummins power. Runs excellent. Good Undercarriage. 22,412 total hours. This is good working processor! Strong Hydraulics.