Pats Heavy Equipment
 906-475-8582

We offer used equipment and sell to customers all over the world. Our focus is on high quality customer service and helping you find the equipment that you need so you can focus on your business or project. If we don’t have something in stock that you are looking for, just let us know and we can find it for you. Not sure what you need? Just give us

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
30 Results Found
Sort By 
Pats-Heavy-Equipment
 906-475-8582
2016 John Deere 1110E  Forwarder
$269,500

2016 John Deere 1110E, One owner, Very well maintained, Clean inside and out, Only 5,700 hours, New Deere engine with only 100 hours, 2 yr. warranty on engine and yes it's transferable, 6068T Deere power, Hydrostatic transmission, New computer hard drive with more memory storage, Pro heater, Excellent 710 Nokian rubber, $269,500

 Greenland, MI
 906-475-8582

 Call
1996 John Deere 750 LCP  Dozer
$39,500

1996 John Deere 750 LGP, Good running dozer, forestry package, Enclosed cab, 6068 Deere engine, 6,968 hours, Good undercarriage, Rear hydraulics, Hydrostatic transmission works great, New alternator, LGP, $39,500

 Greenland, MI
 906-475-8582

 Call
2014 John Deere 703JH  Harvesters and Processors
$189,500

2014 John Deere 703JH, Excellent processor, One owner/woods ready, Excellent running Deere engine, Just over 8,200 original hours, Very clean inside and out, Original paint still in great condition, Very good undercarriage, 622B Waratah processing head with topping saw, Head is in good condition, Everything works as it should, Timbermate computer, Sure Grip controls, Preheater. A/C and Heat, The machine is very tight and has been very well maintained, $189,500

 Greenland, MI
 906-475-8582

 Call
2015 Ponsse Ergo 8W  Harvesters and Processors
$349,500

2015 Ponsse Ergo 8W, Ready to cut wood, Just over 8,200 hours, Mercedes Benz rated at 310 HP runs like a top and sips fuel, This is the easiest to service Ponsse on the market, Hydrostatic transmission, 710 rubber in great condition all around, H7 Processing head, C44 Crane, Preheater, A/C & Heat, Grill guard, $349,500

 Greenland, MI
 906-475-8582

 Call
2002 Ponsse Ergo 6W  Harvesters and Processors
$79,500

2002 Ponsse Ergo 6W, Crane and head have been updated to a 2010 H7, Serial number for the machine is 050188, Tires are at roughly 65 to 70%, Runs good and shifts good, 2 speed hydrostatic transmission, Preheater, Heat and A/C, Serial Number: 050188 $79,500

 Greenland, MI
 906-475-8582

 Call
2015 Rottne F15C  Forwarder
$219,500

2015 Rottne F15C, one set of tracks, Tier 3 John Deere 6068 Engine, No def fluid!! 6,100 hours, Sure Grip Model 360 bucket, 3 speed Hydrostatic transmission, Heat, AC, Pre Heater, 710/45/26.5 rubber in excellent condition, Squirt boom, $219,500

 Greenland, MI
 906-475-8582

 Call
2005 Timbco TN425D  Harvesters and Processors
$109,500

2005 Timbco TN425D, Very solid owner operated low hour machine, 5,486 hours, New injection pumps, New injectors, New oil cooler, New A/C pump, One new final, other is good, New saw bearings, New radiator and oil cooler one year ago, Heat and A/C, Unit came directly out of the woods from the owner working everyday, Double grousers, Good Undercarriage, This machine is woods ready! 8.3 Cummins runs excellent, $109,500

 Greenland, MI
 906-475-8582

 Call
2000 Timbco 425D  Harvesters and Processors
$109,500

2000 Timbco 425D, Owner operated machine, working daily and is ready to cut wood, Leveling cab, Reman 6068T Deere engine, Good strong undercarriage, Log Max 7000 Head in very good condition, Serial number for head is 1616, Machine hours are 15,690, Heat and A/C, Hydrostatic 2 speed, U/C 80%, $109,500

 Greenland, MI
 906-475-8582

 Call
2002 Timbco 820E  Forwarder
$109,500

2002 TIMBCO 820E, Good working machine, new 8.3 Cummins w/remainder of 1 yr. warranty, 25,217 hours, House bearing is good and tight, A/C and Heat, Hydrostatic shifts good, Update computer, Pro Heater, 360 degree bypass bucket, used in a wood yard, new paint and decals, $109,500

 Greenland, MI
 906-475-8582

 Call
2010 TimberPro TL725B  Harvesters and Processors
$139,500

2010 TimberPro TL725B, Good machine, Only 10,364 original hours, Heat & A/C, Dasa 4 computer with Rolly II head, Head does have topping saw capability, Motor is there for the topping saw, Head overall is in good condition, Some play in the grab arms, Undercarriage is at roughly 50%, 8.3 Cummins Eng., $139,500

 Greenland, MI
 906-475-8582

 Call
2006 TimberPro TF810  Forwarder
$149,500

Very well maintained machine. Clean inside and out. 8.3 Cummins runs like a top. Rebuilt injection pump, new center section, new computer, new throttle assembly, and new charge pump. Rubber size is 700/50/26.5 and in good working condition. Roughly 40 to 50% on each tire. Pre heater. Hydrostatic drive. Heat and A/C. Sure grip controls. Ready to go to work. We do take trades depending on what you have. Please feel free to call us anytime. We can also assist with shipping and financing if needed. Thanks for looking! Just over 11,000 hours.

 Greenland, MI
 906-475-8582

 Call
2015 TimberPro TL725B  Harvesters and Processors
$189,500

2015 TimberPro TL725B, 11,480 Hours, 8.3 Cummins, Tier 3 Enging, No Def!, Rolly Head, $189,500

 Greenland, MI
 906-475-8582

 Call
2009 Valmet 415FX  Feller Buncher
$109,500

2009 Valmet 415FX 8,825 Hrs., Cummins 6.7 6 cyl. engine. 20” Quadco Head w/brand new saw disc just installed, Fixed Quadco head, Heat, A/C, Excellent U/C, new upper rollers being installed, 2 spd. Trans. works as it should, Preheater, New paint and decals, No welding on boom and it's very tight, working daily $109,500

 Greenland, MI
 906-475-8582

 Call
2008 Valmet 415EX  Feller Buncher
$119,000

2008 Valmet 415EX, very rare, Very clean machine inside and out, Heat & A/C, Espar heater, Good U/C, 13,281 hours, New motor installed by Roland Machinery 200 hours ago, New paint and decals, 18" Quadco 360 rotation hotsaw head, $119,000

 Greenland, MI
 906-475-8582

 Call
2005 Valmet 840.2  Forwarder
$89,500

2005 Valmet 840.2, Good working forwarder, Everything functions as it should, Nice running 6 cylinder Sisu engine, Preheater, Heat and A/C, Just over 13,700 hours, Hydrostatic transmission shifts very well, Nice clean cab, Bunks are straight, Loader is tight, Squirt boom, Tires are at roughly 45 to 50%, Front tire size 600/65R34's, Bogeys are 600/55-26.5, $89,500

 Greenland, MI
 906-475-8582

 Call
1999 Valmet 644  Forwarder
$49,500

1999 Valmet 644, Very clean inside and out, New center section, Tight loader, Heat & A/C, Very good 23.1x26 tires, Squirt boom, 360 rotation bypass bucket, 8 ton capacity, 3.9 Cummins engine runs very strong, Newer joysticks, 3 speed powershift trans., $49,500

 Greenland, MI
 906-475-8582

 Call
1997 Valmet 646  Forwarder
$49,500

1997 Valmet 646, Nice straight forwarder, 3.9 Cummins runs like a top, 3 speed powershift transmission shifts as it should, 12 ton machine, Heat and A/C, 28Lx26 front rubber at roughly 45%, 700 rear rubber averaging 40 to 45% as well, Squirt boom, Bunks are nice and straight, $49,500

 Greenland, MI
 906-475-8582

 Call
2000 Caterpillar 517  Skidder
$145,000

These are super rare and they do not make them anymore. Cat engine runs like a top. 3 speed transmission works excellent. 5,383 original hours. Undercarriage at 80%. Full forestry package. No heat or A/C. Can be added easily enough. Serial# 5WW00194. We can assist with delivery if needed. We do take trades depending on what you have..Feel free to call us as well.

 Greenland, MI
 906-475-8582

 Call
2016 Caterpillar 564  Forwarder
$199,500

2016 CAT 564 5,600 hours, , set of tracks, exc. Rubber all around, Pre Heater, Heat /A/C, CB Radio, Cat power, Hydrostatic transmission, Sure Grip controls, Joystick steer, Super clean/1 owner, $199,500

 Greenland, MI
 906-475-8582

 Call
2013 Caterpillar 501  Harvesters and Processors
$159,500

2013 CAT 501, Good working unit, Clean inside and out, Strong running Cat engine, Good undercarriage, Heat, A/C, and Preheater, Seat is in excellent condition, Good metal all around, this machine has not been abused, 9,198 hours, 2 speed travel works as it should, $159,500

 Greenland, MI
 906-475-8582

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved