Carolina Used Machinery
Carolina Used Machinery
 704-929-9122
 828-773-2204

At Carolina Used Machinery we have only one goal, to offer our customers the very best selection, price and service on their used equipment transactions.

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 3
58 Results Found
Sort By 
Carolina-Used-Machinery
 704-929-9122
 828-773-2204
Action  Conveyor-Vibrating
$77,900

Action Equipment Vibrating Conveyor XHDB Dynamic Action 60 ft. 6”Long 60” wide 12”/9” deep For screening wood debris

 828-773-2204

 Call
Arasmith 54  Hogs and Wood Grinders
Call for Price

Arasmith Grinder Model: 34.54.HH507.1095 Believed to be a 1999 54" Wide Several Screens Included Vibra Pro Infeed Vibrating Conveyor (SN: 1597, Model HSR 361800FS-3/8MS 120 F - 7.5HP) Magnetic Conveyor Hammer Mill Blower Can Be Seperated

 828-773-2204

 Call
2013 Bandit 3500T  Brush Cutter and Land Clearing
$118,000

MLS Number 11255224 2013 Bandit 3500T Stump Grinder 2,900 Hours One owner New updated Bandit belt driven buck tooth grinder head. Done by Bandit. $40,000 Cat 325 undercarriage 9 liter 325 hp John Deere power unit Cab with heat and air Machine is set up to be a dedicated stump grinder will not run a mulcher head Dependable well maintained machine

 828-773-2204

 Call
2012 Bandit 3090  Wood Chipper - Mobile
$182,900

2012 Bandit 3090 Tree Chipper 24" Diameter Capacity 26" x 36" Opening Cummins 600 HP Only 700 Hrs New Drive New Pump New Hoses New Belly Plate New Auto Feed

 828-773-2204

 Call
2010 Bandit 4680T  Wood Chipper - Mobile
$480,000

MLS Number 11155310 2010 Bandit 4680T Chipper/Grinder 1194 hours Cat 1050 HP engine Has both chipping and grinding packages 75% UC Very little wear on drum, feed wheel, and infeed floor. Has 2" and 3" screens Well maintained by seller

 828-773-2204

 Call
Bandit 95  Wood Chipper - Mobile
$35,000

BANDIT BRUSH BANDIT MODEL 95 CHIPPER Hydraulic Dump Bed Rebuilt Deutz 300 Hours Low Use Machine

 828-773-2204

 Call
2006 Bandit Beast 3680  Mobile Wood Grinder
$290,000

2006 BANDIT BEAST 3680 HORIZONTAL GRINDER lots of new parts new drum bearings and new conveyors c15 cat motor 500 hp has(600 hrs on rebuild) new water pump radiator 3 sets of screens new Florida costal die unit new screens for coloring ready to grind or color

 Blowing Rock, NC
 828-773-2204

 Call
2002 Caterpillar 500 KW  GenSet
$35,000

2002 Caterpillar 500 KW Generator 850 Hours Low Voltage Output Two Available

 828-773-2204

 Call
Cresswood EF 50-100A  Hogs and Wood Grinders
$72,500

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

 828-773-2204

 Call
Cresswood EF-60  Hogs and Wood Grinders
$44,900

?Cresswood EF-60 Grinder 100 HP 60” Wide Feed Opening Includes 60”W Vibrating Conveyor (shaker table)

 828-773-2204

 Call
1991 Diamond Z SWG 1663  Tub Grinder
$102,500

MLS Number 11099745 1991 Diamond Z SWG 1663 Tub Grinder Stationary 500 HP electric primary motor for mill 16' Tub Manufactured in 1991 and installed in 1992 Single owner with only 3,800 original hours Grinder has been well maintained Voltage is 4160v or 2,200V

 828-773-2204

 Call
Dynamic CH585  Wood Chipper - Mobile
$66,500

Dynamic Cone Head CH585 Chipper SN: 585-5051 New Clutch Hour Meter Doesnt Work Currently On Ghe Job

 828-773-2204

 Call
1993 General Kinematics 48 Dual Knife  Screening System
$22,000

MLS Number 11044377 1993 General Kinematics 48" Dual Knife De-Stoner Serial number C-7305 40 HP 575 volt main drive 50 HP 575 single blower 35 TPH capacity separating rock from wood chips Conveyors in photo not included Buyer responsible for dismantling and loading

 828-773-2204

 Call
2001 HogZilla TC 1564-P  Tub Grinder
$225,000

HogZilla TC 1564-P Tub Grinder Product No. 4612 HogZilla TC 1564-P Tub Grinder 2001 3840 Hours 1200 HP Detroit V16 Engine Spare Computer New Shear Bars Several New Hammers and Bits Off The Road Pull Out Truck Included price: $225000 Machine Type: Forestry Tub Grinder Manufacturer: HogZilla Model: TC 1564-P Year: 2001 Machine Location: North Carolina

 828-773-2204

 Call
2019 Jackson Lumber Harvester  Drum Dryer
Call for Price

MLS Number 11156730 2019 Jackson Harvester Wood Drying System Lightly used complete wood drying system Three pass system 30' trommel dryer Trommel dryer and stack have been reconditioned Buyer responsible for rigging

 828-773-2204

 Call
Jeffrey 45 WB  Hogs and Wood Grinders
$30,000

MLS Number 10331908 Jeffrey 45 WB Wood Grinder Direct drive 125 HP electric motor 27” x 42” top feed opening Bottom discharge.

 828-773-2204

 Call
Jeffrey 45WB  Hogs and Wood Grinders
$50,000

Jeffery Wood Hog Model 45WB 200HP w/ Soft Start 42" x 25" Throat Hopper Vertical Feed 31' x 30" Infeed Conveyor 9' x 30" Belly Conveyor Feeds 23' x 24" Incline Conveyor 350 Amp Fuse Box All Electrical Included Currently Under Power IMT 16000 Crane Valby Grapple 5800 Capacity 50HP Electric Hydraulic Cooler

 Central, NC
 828-773-2204

 Call
Kason  Screening System
$18,500

Kason 72" Shaker Screener Model K72-1-SS Single Deck 2 HP Mounted on 36" Steel Base Came out Running

 828-773-2204

 Call
1998 Morbark 1000  Tub Grinder
$124,000

MLS Number 11099736 1998 Morbark 1000 Tub Grinder 3800 hours Good starter unit for mulch yard or a backup. Runs well and is in good shape for yea

 828-773-2204

 Call
2000 Morbark 1300  Tub Grinder
Call for Price

MLS Number 10335608 2000 Morbark 1300 Tub Grinder 7241 hours 860 HP engine Rebuilt transmission New paint Good used machine

 828-773-2204

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved