Carolina Used Machinery
Carolina Used Machinery
 704-929-9122
 828-773-2204

At Carolina Used Machinery we have only one goal, to offer our customers the very best selection, price and service on their used equipment transactions.

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 4
64 Results Found
Sort By 
Carolina-Used-Machinery
 704-929-9122
 828-773-2204
1994 American Wood Dryers 2 Chamber  Dry Kiln
$140,000

MLS Number 10812980 1994 American Wood Dryers Dry Kiln 2 chamber package type dry kiln. Boiler room between the two chambers Very good condition. Requires low pressure steam (15 psi). 5 VFD controlled fans. Includes controls and boiler Capacity approximately 100,000 board feet of 4/4. Each chamber and boiler room is 36'Lx20'Hx32'D Dismantling cost responsibility of buyer

 828-773-2204

 Call
Arasmith 54  Hogs and Wood Grinders
$39,900

Arasmith Grinder Model: 34.54.HH507.1095 Believed to be a 1999 54" Wide Several Screens Included Vibra Pro Infeed Vibrating Conveyor (SN: 1597, Model HSR 361800FS-3/8MS 120 F - 7.5HP) Magnetic Conveyor Hammer Mill Blower Can Be Seperated

 828-773-2204

 Call
Baker Single  Notcher
$12,000

Baker Pallet Notcher 2020 or 2021 Single head 3 stringer Has hyd but was line shaft driven when used Used very little

 828-773-2204

 Call
Baker  Deduster
$8,995

BAKER M4I DEDUSTER Board Deduster

 828-773-2204

 Call
2019 Baker 2 Head C Model  Resaw-Band
$33,000

2019 Baker 2 Head C Model Resaw 480V Return belt with slide

 828-773-2204

 Call
2019 Baker 20 Inch  Chop Saw
$8,500

MLS Number 12708386 2019 Baker 20" Chop Saw Air actuated with foot pedal 10 HP 480V 10' infeed and out feed Includes a new 20" spare blade

 828-773-2204

 Call
Baker Single Head  Resaw-Band
$7,500

Baker Single Head Band Resaw With Return

 828-773-2204

 Call
Bob Hanna Double head  Notcher
$40,000

Bob Hanna Double Head Notcher -The notcher has been in production -Replaced electrical -Replaced Bearings and anything that was needed to make the machine run flawlessly -Production rate is 1 notched stringer per second -Hard to find and extremely reliable

 828-773-2204

 Call

Call for Price

Bob Hanna  Chamfer
Call for Price

Bob Hannah Board Chamfer

 828-773-2204

 Call
Brewco 2 Head  Resaw-Band
$15,500

Brewco 2 Head resaw Was in production until mid January Works great More photos coming soon

 828-773-2204

 Call
2007 Brewco B1600  Resaw-Band
$125,000

BREWCO B1600 GRADE RESAW SYSTEM 2007 Product No. 9508458 Standard Run Around Plus Custom Cab Machine Type: Resaw/Grade System Manufacturer: Brewco Model: B1600 Year: 2007 Machine Location: South

 828-773-2204

 Call
2002 Caterpillar 500 KW  GenSet
$35,000

2002 Caterpillar 500 KW Generator 850 Hours Low Voltage Output Two Available

 828-773-2204

 Call
2008 Caterpillar DP45K2  Forklift
$24,000

2008 Caterpillar DP45K2 Forklift 3077 hours 7000 pounds capacity 16475 pounds chassis weight 42" forks 94" lowered height 130" max fork height Diesel Cascade rotator 3 hydraulic functions Drive tires 80% Steer tires 25%, chunked

 828-773-2204

 Call
Caterpillar V120  Forklift
$9,995

Cat V120 Forklift 12k lb capacity 18,700 lb operating weight Gasoline engine Enclosed cab All 6 tires are good Needs brakes Has small hydraulic leak underneath Runs and lifts

 828-773-2204

 Call
2011 Clarkes Industries  Dust Collection System
$68,000

MLS Number 12231702 2011 Clarke's Industries Bag House ? Explosion doors ? Abort gate at outfeed ? Abort gate at infeed ? Backdraft damper at infeed ? Spark detectors on infeed and outfeed lines ? Airlock ? Backdraft Damper on dust outfeed line ? Deluge System This baghouse is fed from a fan that has suction from Edger, 6”-10”-12”-20” Ukiah (chip/saw) and 20” sawbox. The sawdust from the discharge line under the airlock of the baghouse is sucked into Discharge blower (See Item#2). The dust outfeed line at the middle of baghouse, which discharges the dust fines during the cleaning cycle of bags, returns the fines to the baghouse fan. The Baghouse supplies air back into the building. This baghouse is fed from a fan with following specs: OEM & Model: Clarke’s Industries, Model MH-11, Serial 11OCWUBI3923 Driver: TECO 350 HP, 1785 RPM, 5009C Frame Motor Capacity: 66000 CFM Spark Detection Control System OEM/Model: Clarke’s Industries, Pyroguard CXC-2 Buyer responsible for dismantling.

 BC, BC
 828-773-2204

 Call
Cooks Saw Grade Lumber  Resaw-Band
$26,900

MLS Number 10679774 Cook Grade Lumber Resaw 30 HP Will saw 16" wide No return 1 1/4" to 2" blades

 828-773-2204

 Call
Cooper Machine   O.H. End Dogging  Scragg Mill
$265,000

MLS Number 11413038 Cooper Overhead End Dogging Scragg With Debarker And Gang Edger Transfer Chain Conveyor x 60’, H82,1-7.5 HP 480V gear drive 54" Cut Off Saw, 20 HP 480V motor, hyd stop gates, 20 HP hyd pack 4 strand x 12' long Debarker In Feed Deck, 5 HP 480V gear drive, H78 16” wide x 19’ long log haul belt conveyor (driven from debarker in feed tire drive) Cambio 24" Debarker, 75 HP 480V drive, spiked in/out feed rolls 20 HP 480V drive 3’ wide x 36’ long hour glass rolls transfer, 7.5 HP 480V gear drive 5-strand Scragg in feed deck x 20', H82, hyd log stop loader, 7.5 HP 480V gear drive Cooper Overhead Scragg Mill, 30 HP 480V 150 gal hyd package, variable speed cable drum feed works with pantograph arm Log positioning rolls on infeed w/ double overhead dogging system, 48” dia. saw husk(125 HP 480V each saw), setworks control 2-18” wide 2-position slab and side board belt conveyors, operators control cab w/ controls, camera and monitor for centering log 8-16’ length capacity, maximum log dia. 22”, largest square cant 12” x 12”, smallest square cant 4” x 4” 5-strand lower camel back landing transfer x 9’-6” long, 4-strand hyd lift transfer to gang edger and cant center bypass Center bypass rolls and belt conveyor to edger out feed landing transfer 10” mainland gang edger w/ 200 HP 480V drive,34” inserted tooth saws with 5/16” kerf(24 spare saws with collars), 2-2-2-4 spacing 6” x 50” mainland board edger w/ 150 HP 480V electric drive, 24” inserted tooth saws with 5/16” kerf, 8”-4”-4”-10”-6” pockets, 7-individual actuated self tailing belt conveyor out feed c/w splitters Camel back transfer,4-strand x 27-1/2’ long, H78B, 5 HP 480V gear drive 2-Saw Trimmer, 4-strand x 10’ long, 16’-4” between 20” dia. saws,10HP 480V drive on feed works and saws, 16” wide x 28’ long out feed belt conveyor, 5HP 480V gear drive 4-strand x 26’ long H78 camel back transfer w/ 5HP 480V gear drive

 828-773-2204

 Call
Cresswood EF 50-100A  Hogs and Wood Grinders
$72,500

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

 828-773-2204

 Call
Cresswood EF-60  Hogs and Wood Grinders
$44,900

?Cresswood EF-60 Grinder 100 HP 60” Wide Feed Opening Includes 60”W Vibrating Conveyor (shaker table)

 828-773-2204

 Call
Diehl MR 90  Gang Rip Saw
Call for Price

Diehl model MR-90 Gang Rip Saw Twelve ( 12 ) inch saw arbor width capacity- Roll feed 50 HP 3600 RPM arbor motor -direct coupled wired 480 volts, 3 phase- new motor bearings 2 HP variable speed feed motor 50 to 150 FPM feed speed-variable Four powered top feed rolls- Excellant feed roll gears 12 inch arbor with one (1) sleeve with spacers Adjustable rip fence Serial number : 66M-1668 Cleaned , checked , and painted

 828-773-2204

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved