Tree 2UVR Vertical Milling Machine Incudes Elephant Vise Good Condition

Custom Ceiling / Flooring Table Table Size: 32' x 6'9" to 14'3" Table Operated by Both Push Button and Key Fob Controls Floor can be built manually on the table Clamping Stud Locators at 16" & 24"

Turner Machinery Company Resaw Good Condition

3000 CFM 5 HP 5-1/2” static pressure

40? deep X 87.5? wide capacity. The Maximum opening is 49.5? and the pods will extend 9.5? for a minimum opening of 40?. The press is rated to 100 PSI and has (1) pod short of 100% pod coverage. That being the center bags are staggered. There are spring loaded bed rollers to aid in loading and unloading. The top and bottom plates are dent free and no air leaks This fully functional machine has been fully cleaned and checked and is ready to work..

Tyler Kerfsaver XL Resaw 1-1/4" Blades 36" Diameter Bandwheels Includes: Feed system that can tilt to mill tapered siding

Tyrone-Berry Carriage Feed Drive SMA-225 60-hp Electric Motor Included

UMP BP500A Briquette Press New System - Ready to ship!

12'x42' Triple Pass Drum 20 MM BTU Webb Burner Burner feed bin Burner blowers Blower to pull shavings through drum Cyclone BMM 3-level Shaker Screen (2) Outfeed Conveyors Electrical controls

Heil 10'x40' Triple Pass Drum Dryer Trunions Drum is ready to load.

Heil 10.5' x 32' Triple Pass Drum Dryer 1. Jackson Harvester Burner 24 million BTU 2. Fuel Bin 3. Pipe and fan from fuel bin to burner 4. Air lock on dryer 5. 8 X 24 3 pass dryer 6. Trunnions 7. Fans to dryer 8. Pipe to cyclone 9. Cyclone 10. Pipe to fuel bin 11. Fan moving sawdust to fuel bin 12 Hog with 200 HP motor 13 Dust collection system

This system will be ready for removal around January 2025. Removal, transport and installation is available. System was totally rebuilt in 2024. - Heil 12’x40’ Triple Pass Rotary Drum dryer. Maximum water evaporation is 16 tons per hour. - 3MM-60MM BTU Natural gas burner. New controls, new gas train, controls are integrated to the whole system. - 12’X36’ Cyclone with stand. - Air lock for cyclone. - 250hp Fan for drum. - All ductwork is included and stainless steel. - (3) 30”x50’ Crescent top belt. UHMW wear plates under the belt. Bottom return roller. Self-cleaning rollers on drive and idle pulleys. - (1) 30”x20’ Crescent top belt. UHMW wear plates under the belt. Bottom return roller. Self-cleaning rollers on drive and idle pulleys. This belt will run in FWD or REV it would go under the airlock. - 40’X16” Leveling auger with frame. - System includes: All controls for the burner and drum. All electrical to run the system including HMI, Mod HMI mirror to 55” TV, camera system to monitor the entire drying operation. System can be run and monitored by 1-man.

Helle Scragg Mill End Dogging Carriage Sawcab Helle Vertical Edger Helle Power Panel Infeed Log Deck: 4-Strand, 20' Sawdust Drag Chain: 30' Rooftop Conveyor: 4-Strand, 20' Misc decks, rollers All electrical and controls.

Hemco Sorter Line System includes: - Unscrambler - Board Singulator - Even end roll case - 34 Sling Bays - 10 Slot Bays - Stacker Outfeed - Trim Saw

Hemple 10 Spindke Sander lots of sand paper rolls mincluded

Hemple 10 Spindke Sander lots of sand paper rolls mincluded

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

HewSaw SL250 Trio sawing line from 2005 This line has already been dismantled and loaded into containers. It is ready to ship! - Consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m - Feeding speed of the sawing line can be adjusted from 50 m/min to 150 m/min. Top diameter: 100–420 mm Maximum log diameter: 550 mm Cant height in Chipper Canter: 75–410 mm Cant width in Chipper Canter: 75–410 mm Cant height in Rip Saw: 63–310 mm Cant width in Rip Saw: 75–410 mm Saw kerf: 4.2–5.0 mm Chip length: 20–30 mm Sawline 1. Measuring conveyor 2. Log scanner 3. Log positioner 4. Chipper canter 5. Cant scanning conveyor 6. Cant scanner 7. Cant saw 8. Seperating conveyor EK2 9. Cross conveyor 10. Belt conveyor 11. Cant turner 12. Infeed conveyor 13. Rip saw 14. Belt conveyor 15. Belt conveyors under machines, for waste handling 16. All electric boxes