Specifications: - Working Width: 15 - 230 mm (19/32 to 9-1/16 inches) - Working Height: 6 - 150 mm (1/4 to 5-29/32 inches) - Spindle Speed: 6,000 RPM - Spindle Dia: 40 mm - Clamping Length of horiz. and universal spindles: 235 mm - Clamping Length of vertical spindles: 160 mm - Feed Speed (variable): 6-24 m/min (19-80 fpm) - Diameter of Feed Roller: 140 mm (5-1/2 inches) - Diameter of Table Rollers: 100 mm (4 inches) - Width of feed rollers: Shaft mounted to 9 inches - Width of rollers opposite left spindle: Stackable to 6 inch Head Power: - First head: 10 HP - Second head: 7.5 HP - Third head: 7.5 HP - Fourth head: 15 HP - Fifth head: 10 HP Additional notes: - Driven roller outfeed table: Smooth Steel - Driven table before first bottom spindle: Serrated Steel - Top Chipbreaker shoes: Dual receding (spring), Smooth - Manual lubrication pump - Tables and fences: Hardened Smooth Chrome Total Weight unskidded: 8,375 lbs.

2022 Kiln-Direct Piggy Back Kiln New, Never Used 1999 53' Trailer

This Kimwood Panel Master Sander is in good working/running condition and it is ready to load! - 48" Feed - Feed speeds up to 200 lineal feet per minute - (2) opposing heads - 250HP - (2) operator control panels - Many spare parts including sanding belts

14@ x 16” inlet 16” Round inlet no motor

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump

Komo VR508 CNC Router 60" x 120" Table 25 HP Sullair Vacuum Pump Dust Collector (10 or 15 HP - need to confirm) (2) Two main router heads with Quick Change (2) Vertical Drill Units (1) 8 HP 10" Saw Fanuc Control

Kuka KR60-3 Robot System KR C4 Control System Kuka Programming Smart Pad Robot Enclosure (3) Heavy duty conveyor racks

Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

1- 5mm Boring and Inserting Unit with Vibratory Hopper 1-8mm Boring and Inserting Unit with Vibratory Hopper Power: 208v-220v, 3 Phase, 30 Amps 96? Maximum Work Zone 4 zone stops 3-Axis Control For Positioning Weight 6,000lbs Solid One-Piece Welded Tubular Steel Frame Footprint (L x W x H): 135? x 45? x 82? Shipping Dimensions (L x W x H): 42.3? x 49? x 43? Shipping Weight: 7500 lbs

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

LAMB 23x27 inch opening grinder with 150 HP motor, 1 3/8” screen and starter control. 460 volt 3-phase

Model # 01-1172-05-01 60” x 142” table size (1) available no hydraulic units or hand control

Leadermac Moulder 12" Capacity 10-Heads: #1 10 HP, #2 25 HP, #3 25 HP, #4 25 HP, #5 25 HP, #6 30 HP, #7 30 HP, #8 30 HP, #9 30 HP, #10 15 HP 140 FPM with 15 HP feed motor ATS Heads on Top and Sides Second machine available for parts only: Spare castings, gearboxes, pendulums, control panel, spindles

Leadermac LMC-623H Moulder with Infeed Deck This system has not run in year and will need repair.

Leadermac LMC 418-S 4 head moulder 20-80 FPM feed spiral head on bottom 460 volt 3 phase

Lico Rip System with 5-Moving Blades Includes: Infeed, tilt hoist, unscrambler, Lico infeed, 125 HP gang, outfeed tunnel, 75' sort chain Lateral Scanners High speed roller gang with (5) shifting blades: Up to 500 FPM Two Scanmeg scanners Singulating infeed Saw infeed fence Hogging blade to remove inside edging Outside edging falls off and into shredder New system upgrades in 2018

Year: 2006 Working Width: 25mm to 230mm (1" to 9") Working Thickness: 8mm to 120mm (0.31" to 4.72") Bottom Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Top Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 7.5kW (10 HP) Side Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Configuration: Bottom, Side, Side, Top, Top, Bottom Feed Motor: 4kW (5.5 HP) Elevation Motor: 0.75kW (1 HP)

Lobo 6-Head Moulder 9" Wide capacity

GB-CIS Single-end 575V / 3 Ph / 60 Hz 5” wide rubber pad conveyor Equipped with industrial motor for full power cutting and sanding capacity

Loewer Discmaster 6TD Brush Sander Vacuum Bed