The seller of this Pneumafil dust collection system has confirmed that it is in great working/running condition and ready to be loaded! - 150HP - Round duct enters the colletor at 48" diameter

This is crated, ready to go! The price includes the machine only, options are available upon request. 12 month warranty The semi-automatic pallet nailing machine is an ideal tool to produce various types and sizes of pallets on blocks and stringers. Its construction allows for fast and easy changeovers. Only one operator is needed, and it reaches an output of 210-230 pallets per 8-hour shift (depending on the operator skills and work organization). - Two nail guns with different size nails are suspended on two spring balancers for better tool handling. (Nail guns are an optional add-on) - Pneumatic block/stringer holders and pallet lifters ensures high quality and easy handling. Benefits: • Easy to use: one operator can build 210 - 230 pallets within 8 hours • Compact design: total footprint 3.3 m2 (35.5 ft2) • Universal: adjustable worktop allows production of stringer pallets on 2, 3, 4, or 5 stringers and block pallets (including EUR pallets) up to 9 blocks • Efficient: quickly switch to any size pallet • Pneumatic clamp: easily centers stringers or blocks • Pneumatic lift: raises pallet to minimize operator lifting • Overhead roller track: nail guns can move freely during work • Bottom template: template to build pallet legs • Adjustable steel clinch plates: galvanized and hardened steel plates for clinching nails • Unique: diagonal table adjustment reduces work by 50%; option to assemble CP1, CP2, CP3, CP4, CP5 pallets; only 2 Allen keys required to adjust the table Technical Specifications: • Weight: 970 lb (440 kg) • Operating pressure: up to 8 bar (116psi) • Material: structural steel Pallet Dimensions: • Width: 31.5" - 74.8" (800 - 1900 mm) • Lenght: up to 51.2" (1300 mm) External dimensions: • Worktop width: 88.6" (2250 mm) • Table width comprising rail mounting system for balancers: 122.9" (3122 mm) • Worktop height: 64.1" (1627 mm) • Total height including rail mounting system for balancers: 101.6" (2581 mm)

Pneumatico Block Nailer Hardly used - ready to ship!

Ponsse Buffalo Dual Harvester H53 Head New CPU and Wire Harness to boom New trans coupler drive New spare tire and wheel (2) Sets of tracks (80% and 30%)

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Manufacturers Specifications: Spindle Arbor Size: 1? Spindle Travel: 3? Table Top Size: 30? x 28? Motor HP: 5 Electrical: 230 3 ohase

TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE

1 HP tenoner Approx. 2HPsaw Approx 28" x 16" table

Powermatic OES9138 Oscillating Edge Sander Includes: (5) Sander belts

Powermatic Model 100 12" Planer 3 Phase power

Powermatic Model 221 Planer

Prater 18" Hammer Mill 40 HP Motor Hammers in good shape New screen

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Precision 55 screener, was working when pulled out of production.

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision 10'x20 Screen 3-Decks: 3/4” top deck, 1/4” middle deck screen

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

Precision Disc Scalping Screen Model PDS648 48” wide x approx 8’ long 6 shafts and the discs are stitch welded on

Precision 58" Chip Pac 6-Knives 72" Cyclone H-Type blower with dual load out chutes 6'x6' Screen 25' Vibrating Infeed with transition chute to chipper with fiberglass section and MDI metal detector

Precision P72HX Rosser Head Debarker AC in cab 3-Strand Infeed Deck Stop and Load 50 HP Motor Includes: Bark Conveyor