Joy 290 Compressor with just over 100 hours!

This system is part of a project that never took off. The machines are new, never installed: - (6) Kahl 39-1000 Pellet Mills - 200 kW (268 HP) Motors: Two are wired at 460v, four at 575v. The other 4 can be rewound for a fee. Manufacturer specs (to be confirmed): Equipment List 6 Pelleting press type flat die 39-1000 Consisting of: 575V, 60 Hz 110 V AC 24 V DC - Divided cast iron case provided with cooling fins in the gear zone - Venting port in pellet mill middle part - Dust and inlet hood with product distributor and a venting port - Main shaft with thrust and radial bearings - Pan grinder head with scrapers and pan grinder rollers made of flame hardened steel - Temperature measuring of the die - Spring assembly, stainless steel - Spacer rings - Discharge unit with special scrapers - Worm gear turning in oil bath, worm wheel made of special bronze, hardened worm - shaft - Fan pulley - Oil pump to lubricate the main bearings, with oil filter, pressure device and thermometer 6 Three phase induction motor For the drive - Voltage: 575V - Motor power: 200 kW at 1,800 RPM - Drive shaft 90x170mm - Protection class: IP65, motor type B3 - Bearing suitable for 18 kN @ x=136mm - Stainless steel nuts and bolts - 12 tension rails • Two pieces per motor 6 Drive accessories for the pelleting press Consisting of: - V-belt pulley - V-belts - V-belt guard, steel construction, lateral walls with special air guiding plates, - indispensable for pelleting press cooling - 6 Roller gap control, type Distamat - For continuous adjustment of the roller head via the hydraulic nut Consisting of: - Hydraulic system for the press - Valve control - Electronic elements for transforming the measuring signals - Output: 4 – 20 mA = 0-5 mm - 6 Central slip ring seal air cleaning - For protection of the pan grinder roller slip ring seals during operation of the press Consisting of: - Air distribution with piping and coupling - Hose with central air connection to the pressed air 6 Oil coolers for the press Designed as oil-to-air heat exchanger Consisting of: - Oil-to-air heat exchanger - Oil pump - Hose connections - Temperature controller - 6 Press outlet box 39-1000 - Stainless steel design Equipped with: - Reversing flap - Inspection opening - Control socket - Aspiration connection, venting port - Pile up indicator - 1 Spare roller head for the 39-1000 - Spare, for easy and quick exchange of the roller head - 6 Automatic press control, type EAPR - Allen Bradley - For automation of pelleting line - Enclosed design, wired ready for connection according to IP 65 Consisting of: - Control and monitoring of all drives and units belonging to the line - Load dependent control of the pelleting press - Min/Max current monitoring of the pelleting press - Slippage monitoring of the pelleting press - Throughput control (t/h) - Visualization of the line on a graphic operator panel - Preselection of the process parameters at the OP - Fault and alarm messages at the OP - Start/s

This mill will be refurbished before it is shipped out. Can be configured for any application. Pellet Mill Line: Refurbished Model 39-1000 Including: - - Conditioner - - Feeder - - Drive - - Outlet box - - Discharge device - - Knife assembly - - 250 HP motor - - Hydraulic System - - Complete Roller Head - - MCC complete with starters - - PLC complete with programming - - Used Die 6mm - - Steel pellet mill base

Year: 1999 Fully automated door lite cutting system for high volume production. Equipped with: Handler automatic door loader draws from two door stacks, – DL-NCA programmable automatic door lite cutter – Dual heads for quick change between steel and fiberglass, – EP-1 automatic edge prep machine bores for latch and mortises faceplate pocket.

The KENT USA KTM-3VKF knee-type milling machine combines proven designs with the latest advanced technology in engineering and over 35 years of manufacturing excellence. Reliability and performance make these a favorite among demanding job shops and in-house tool rooms. With best in class features and superior built quality, the KTM-3VKF knee mills are the new industry standard in high-performance vertical turret knee-type milling machine - R-8 spindle, 3 hp spindle motor, AC-Freq drive head - Digital spindle rpm display and LED spindle load indicator bar - 10” x 50” table size hardened and ground - T-slots ground parallel to table ways - automatic lubrication system - interlocked UL breaker switch on the electrical cabinet - standard tool/accessories and manual Options - KTM-3VKF- Options DRO-203 Newall DRO 2-axis 0.0002” resolution $2,450.00 DRO-INST $450.00 PFEED-X: Table x-axis power feed $650.00 KP-0620SHKIT X servo safety handle kit (2ea. Handles installed). Waiting for quote Not available manual machine PFEED-Y saddle (y-axis) power feed $780.00 KP-0620SHKIT Y servo safety handle kit Waiting for quote Not available on manual machine APD-MT air power drawbar unit (maxi-torque USA) $1,000.00 FCOOL-INT flood coolant system (internal reservoir) $750.00 CHIP-PAN chip pan $600.00 APD-MT-N30 air power drawbar nit maxi-torque for NMTB #30 spindles $1,000.00 An additional temporary $1000 surcharge for inbound ocean Frt is in effect $7,680.00

The KENT USA SGS-1230AHD Surface Grinder combines proven machine design with advanced technology in control and manufacturing. These precision and reliable 3-axis automatic surface grinders enhance productivity with intuitive easy to use operator controls and low maintenance. Kent USA grinders are one of the most globally trusted brands, with proven long-lasting dependable precision and performance with best in class customer service since 1979. Standard Accessories: - Grinding wheel and wheel flange - Wheel balancing base and arbor - Diamond table dresser base and tip - Leveling bolts and pads - Work light - Toolbox with tools - 12” x 28” electromagnetic chuck and control - Dust-suction coolant system - Overhead parallel dresser Options - SGS-1230AHD - Options Price Acu-Rite 203 Newall DP700 DRO package (2 axis, 0.0001” resolution) $3,680.00 DRO package installation $650.00 Upgrade to Paper filter magnetic separator coolant system $2,800.00 Static wheel balancer $750.00 Extra wheel flange $300.00 An additional temporary $2000 surcharge for Frt. Is in effect $8,180.00

Front Load Dry Kiln with Hawa Controls as pictured gas fired inside dimensions:120” x 60” x 115” high

This Kimwood Panel Master Sander is in good working/running condition and it is ready to load! - 48" Feed - Feed speeds up to 200 lineal feet per minute - (2) opposing heads - 250HP - (2) operator control panels - Many spare parts including sanding belts

34” capacity knife grinder

14@ x 16” inlet 16” Round inlet no motor

Table Configuration: • KOMO VR 512 Mach I CNC Router • 60 x 144" Cast aluminum machined vacuum table • Table has been designed for High Flow vacuum pump • Ideal for nested based manufacturing • Heavy Duty fixed Gantry Bridge • A-Frame style Gantry Support legs • Pop up part locating pins (set of three pins) Head Configuration: • 12 HP High Frequency 4-pole Router Spindle • Programmable spindle speeds from 9,000 - 18,000 RPM • 8-Position Dynamic tool changer with BT-30 tool holders • (6) Vertical drill spindles on 32 mm centers • (4) Horizontal boring spindles with 1 + 1opposing in the X-axis and 1 + 1opposing in the Y-axis Positioning: • All axes are positioned by AC Servo Drives • Heavy Duty Profiled machine rails and bearing trucks • Preloaded precision ball screws for positioning • Automatic Lubrication system to all bearings • Rapid travel speeds of 1,250 IPM on both the X and Y-axes • Travel speeds of 600 IPM on the Z-axis Controller: • FANUC 210i PC Front end Controller • Windows Operating system • RS-232 Serial interface • 3-axis simultaneous control • Feed rate override • Spindle speed override • Hand help pendant • Remote operating pedestal with vacuum and cycle start buttons, pop up pins, as well as emergency stop.

Komo VR508 CNC Router 60" x 120" Table 25 HP Sullair Vacuum Pump Dust Collector (10 or 15 HP - need to confirm) (2) Two main router heads with Quick Change (2) Vertical Drill Units (1) 8 HP 10" Saw Fanuc Control

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump

Krusi Krusimatic G2 Log Milling Machine - Capable of milling dovetails, lap joints, joinery, end cuts, key cuts and drill holes - Fully automated - Still installed and available for inspection

5000 lb Scissor Lifts (3) Available 3 Phase and Single Phase

Unique 250 MC

It is a 2 saw re-rip with one moveable saw and an adjustable fence. Capacities: Minimum length = 8” Maximum length = 192” Minimum width = 1 ½” Maximum width = 6” Minimum thickness = 7/8” Maximum thickness = 1”

Universal Single Notcher 10 HP Motor

Scragg Mill With Edger Cambio Debarker Precision Chipper Shaker Screen Just Removed From Production

2007 Weinig Powermat 400 6-Head Moulder 2007 Weinig R960 Profile Grinder Weinig Measuring Stand HSK heads Radial head controls More info coming!