Brewer 5-Head Resaw Return Belt

Brewer 3-Head Resaw Model # BR-3B8X12R

Brewer BR8112 Double Arbor Gang with Sizer 12" Wide Capacity 75 HP Top Arbor 75 HP Bottom Arbor 30 HP Sizer 480 V/3Ph Seller purchased this and never used it. Includes the following that was never installed: Controls and starters, VFD for infeed, rollers, bottom arbor, some new bearings,

Still under power 24' infeed deck 72" saw bar

LM Package Saw Gas Engine Rollers

V2000 60 x96TS-1VL-ONS-OCE-06PS Transportation Simulator Performs both rotary and vertical motions Designed for testing larger crates up to 60-in. by 96-in

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

Gantry Clearance: 12? Z Axis Travel: 13? Table Size: 4’x8' Working Area: 49?x97? Rapid Speed: 1,800 IPM Cutting Speed: 1,000 IPM Spindle HP: 12HP Spindle Speed: 6,000 – 24,000 RPM Cutting Time: 50 Hours Electrical: 208-230V/ 3PH Equipped With: 12 HP HSD Spindle 8 Position ISO 30 ATC Yaskawa AC Servos Drive Motors 6 Zone Vacuum Table Planetary Gear Box Drive System Tooling Kit Helical Rack & Pinion X/Y Axis Ball Screw Z Axis 10 HP Stock Regenerative Blower Vacuum Pump Syntec Industrial Control System Controller: B+R PP65 Stepper Package Footprint: 78?x127? Approx. Shipping Weight: 3,500 Lbs

1- 5mm Boring and Inserting Unit with Vibratory Hopper 1-8mm Boring and Inserting Unit with Vibratory Hopper Power: 208v-220v, 3 Phase, 30 Amps 96? Maximum Work Zone 4 zone stops 3-Axis Control For Positioning Weight 6,000lbs Solid One-Piece Welded Tubular Steel Frame Footprint (L x W x H): 135? x 45? x 82? Shipping Dimensions (L x W x H): 42.3? x 49? x 43? Shipping Weight: 7500 lbs

Larick 220 is designed for use with flexible brush type sanding wheels. (2) counter rotating spindles with 1 HP motors 1" dia. x 6" arbors with 6" travel Variable speeds 100-1200 RPM 60" x 24" table 36" height...2" travel 220 volt single phase Less than 100 hours since purchased in February 2021

Model # 01-1172-05-01 60” x 142” table size (2) available pricing is each no hydraulic units

- Main motor: 30 HP, 220V/440V (prewired for 220V), 3-phase, 72.9A/36.4A - Elevation motor: 1/2 HP, 1.94A/0.97A - Hydraulic pressure: 1000 PSI - Maximum cutting capacity: 10" x 16" - Distance from blade to conveyor table: 1/4"–10" - Feed speed: 0–61 FPM - Saw blade size: 180" L x 1" W - Saw blade speed: 7300 FPM - Floor to table height: 40" - Infeed table: 106" L x 16" W - Infeed belt: 215-3/4" L x 15-1/4" W - Return table: 107-1/2" L x 18-1/2" W - Return belt: 215-3/4" L x 7-1/4" W - Wheel size: 28" dia. x 7/8" W - Dust port size: 2 x 4" - Overall size: 85" W x 108" D x 83-1/2" H - Approximate shipping weight: 4325 lbs.

Leadermac Hypermac LMC-630H Moulder 6-Head Machinewith Outboard Bearings MFG specs (to be confirmed): HEAD HP CUTTERHEAD SWING HOOD SIZE 1) 1st Bottom Head 20 HP 4.9” to 7.1” (125 – 180 mm) 5.9” (150 mm) 2) Right Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 3) Left Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 4) 1st Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 5) 2nd Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 6) 2nd Bottom Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) side heads are opposed. Directly Opposed Side Heads in lieu of staggered side heads including Air/Hydraulic Quick secure Position Locking System Easy set motorized positioning system for near side and top head Increased spindle speeds to 8000 RPM in lieu of standard 6000-RPM With 8000 rpm Spindles you will realize a 33% increase in productivity over std. 6,000 rpm Hydro-Loc Quick Change Outboard Bearings Timing belt (Poly Chain) Drives on 2 Top Heads & Last Bottom Head 2 part Sectional Pad Pressure Plates after 2nd Top Head with 2 separate pressures and fine adjustment to the outside shoe in lieu of single pressure plate Pneumatically operated Auto Feed Table Lubrication System utilizing Stand Alone Operators Control Console on HD wheels w/1.6.5 ft of Remote – Hand held Pendant Push Button Control (Jog Forward/Reverse Beam Up/Down) with 12 feet of power cord to help with setup Pneumatic Low Pressure Safety Control (if the air pressure drops below the accepted run level the moulder will shut down or will not operate)

Leadermac LMC-623H Moulder with Infeed Deck This system has not run in year and will need repair.

Leadermac Moulder 12" Capacity 10-Heads: #1 10 HP, #2 25 HP, #3 25 HP, #4 25 HP, #5 25 HP, #6 30 HP, #7 30 HP, #8 30 HP, #9 30 HP, #10 15 HP 140 FPM with 15 HP feed motor ATS Heads on Top and Sides Second machine available for parts only: Spare castings, gearboxes, pendulums, control panel, spindles

Leadermac LMC 418-S 4 head moulder 20-80 FPM feed spiral head on bottom 460 volt 3 phase

Leadermac LMC 418S 4-Head Moulder Extra tooling included

Lico Rip System with 5-Moving Blades Includes: Infeed, tilt hoist, unscrambler, Lico infeed, 125 HP gang, outfeed tunnel, 75' sort chain Lateral Scanners High speed roller gang with (5) shifting blades: Up to 500 FPM Two Scanmeg scanners Singulating infeed Saw infeed fence Hogging blade to remove inside edging Outside edging falls off and into shredder New system upgrades in 2018

Rip Saw Model SDL 1200 Edging Conveyor Model UHY 1900