UMP BP500A Briquette Press New System - Ready to ship!

5000 lb Scissor Lifts (3) Available 3 Phase and Single Phase

Hot melt engineered flooring line is still under power and available for inspection: - This consists of a hopper fed infeed conveyor with adjustable fence - 2011 12” Union Tool hot melt roll coater complete with spare applicator roll - Nordson Holt melt 55 gallon glue melter and pump - 16ft layup table - 8 Nip press with rubber rolls for making smooth top and rough face flooring, each roller is independently pressed, comes with several spare air cylinders. - Movable Manual chopsaw for cutting glued up boards into sections.

Unique 250 MC

It is a 2 saw re-rip with one moveable saw and an adjustable fence. Capacities: Minimum length = 8” Maximum length = 192” Minimum width = 1 ½” Maximum width = 6” Minimum thickness = 7/8” Maximum thickness = 1”

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

75 KVA 480 volt to 240 volt

Action Pac Mulch Bagging Line Per manufacturer: Seal 480 Bags per hour Can also fill bulk totes Purchased new in 2021. Never installed into production.

AdcoWest Sawmill Canter - REFURBISHED - Equipped with Keyknife chipping heads including power - (3) 40 HP Heads and (1) 20 HP (lower head) as specified by head manufacturer No wiring, switches, set works, or controls included but electric motors present are included. Feed through system as engineered by AdcoWest and operated by prior owner. (no infeed table included or feed through chain power) All other feed trough motors are included.

AEM 36" Sander

AEM 36" Sander 20 HP main motor Combination head

AER 5,000 CFM Dust System

6,000,000 BTU max output 400,000 BTU min output 94% thermal efficiency Natural gas fired never used…damaged in transit…cosmetic damage only

There are two drums and burners that will be sold as one package. They are ready for immediate removal: - 13x60 Stainless Steel Drum - Dual 70 million btu natural gas burners, max thermal output of 42.200.000 kj/h, discharge cyclone, multi-clones, fans with motors, stack, all relating ducting and steel structure. - These dryers are fired with natural gas or propane. Main cyclone at discharge of dryer has 3.66m diameter, secondary multicyclones (8/dryer) are 1.07m diameter each, stack is 37m above grade, Volumetric airflow rated 30.68 cubicmeter/second. Equipment plant drawing, manuals and blueprints available when system is purchased.

5 HP Mist Collector 460 volt 3 phase

Morbark Trailer Tipper

Shaw Almex Vacuum Press

Alpha Brush KS-LS Sander

Altendorf F45 Slider