704-288-1904
Carolina Machinery Sales (CMS) works in the sawmill, pallet and woodworking industries. In addition to the buying and selling of used equipment, we work as brokers and take in machines on consignment. Give us a call today!
Industry
Woodworking
629 Results Found
704-288-1904
Call for Price
Table Configuration: • KOMO VR 512 Mach I CNC Router • 60 x 144" Cast aluminum machined vacuum table • Table has been designed for High Flow vacuum pump • Ideal for nested based manufacturing • Heavy Duty fixed Gantry Bridge • A-Frame style Gantry Support legs • Pop up part locating pins (set of three pins) Head Configuration: • 12 HP High Frequency 4-pole Router Spindle • Programmable spindle speeds from 9,000 - 18,000 RPM • 8-Position Dynamic tool changer with BT-30 tool holders • (6) Vertical drill spindles on 32 mm centers • (4) Horizontal boring spindles with 1 + 1opposing in the X-axis and 1 + 1opposing in the Y-axis Positioning: • All axes are positioned by AC Servo Drives • Heavy Duty Profiled machine rails and bearing trucks • Preloaded precision ball screws for positioning • Automatic Lubrication system to all bearings • Rapid travel speeds of 1,250 IPM on both the X and Y-axes • Travel speeds of 600 IPM on the Z-axis Controller: • FANUC 210i PC Front end Controller • Windows Operating system • RS-232 Serial interface • 3-axis simultaneous control • Feed rate override • Spindle speed override • Hand help pendant • Remote operating pedestal with vacuum and cycle start buttons, pop up pins, as well as emergency stop.
Call for Price
Kuka KR60-3 Robot System KR C4 Control System Kuka Programming Smart Pad Robot Enclosure (3) Heave duty conveyor racks
Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles
Call for Price
V2000 60 x96TS-1VL-ONS-OCE-06PS Transportation Simulator Performs both rotary and vertical motions Designed for testing larger crates up to 60-in. by 96-in
Call for Price
Gantry Clearance: 12? Z Axis Travel: 13? Table Size: 4’x8' Working Area: 49?x97? Rapid Speed: 1,800 IPM Cutting Speed: 1,000 IPM Spindle HP: 12HP Spindle Speed: 6,000 – 24,000 RPM Cutting Time: 50 Hours Electrical: 208-230V/ 3PH Equipped With: 12 HP HSD Spindle 8 Position ISO 30 ATC Yaskawa AC Servos Drive Motors 6 Zone Vacuum Table Planetary Gear Box Drive System Tooling Kit Helical Rack & Pinion X/Y Axis Ball Screw Z Axis 10 HP Stock Regenerative Blower Vacuum Pump Syntec Industrial Control System Controller: B+R PP65 Stepper Package Footprint: 78?x127? Approx. Shipping Weight: 3,500 Lbs
Call for Price
1- 5mm Boring and Inserting Unit with Vibratory Hopper 1-8mm Boring and Inserting Unit with Vibratory Hopper Power: 208v-220v, 3 Phase, 30 Amps 96? Maximum Work Zone 4 zone stops 3-Axis Control For Positioning Weight 6,000lbs Solid One-Piece Welded Tubular Steel Frame Footprint (L x W x H): 135? x 45? x 82? Shipping Dimensions (L x W x H): 42.3? x 49? x 43? Shipping Weight: 7500 lbs
Call for Price
Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!
Call for Price
Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim
Call for Price
Larick 220 is designed for use with flexible brush type sanding wheels. (2) counter rotating spindles with 1 HP motors 1" dia. x 6" arbors with 6" travel Variable speeds 100-1200 RPM 60" x 24" table 36" height...2" travel 220 volt single phase Less than 100 hours since purchased in February 2021
Call for Price
- Main motor: 30 HP, 220V/440V (prewired for 220V), 3-phase, 72.9A/36.4A - Elevation motor: 1/2 HP, 1.94A/0.97A - Hydraulic pressure: 1000 PSI - Maximum cutting capacity: 10" x 16" - Distance from blade to conveyor table: 1/4"–10" - Feed speed: 0–61 FPM - Saw blade size: 180" L x 1" W - Saw blade speed: 7300 FPM - Floor to table height: 40" - Infeed table: 106" L x 16" W - Infeed belt: 215-3/4" L x 15-1/4" W - Return table: 107-1/2" L x 18-1/2" W - Return belt: 215-3/4" L x 7-1/4" W - Wheel size: 28" dia. x 7/8" W - Dust port size: 2 x 4" - Overall size: 85" W x 108" D x 83-1/2" H - Approximate shipping weight: 4325 lbs.
Call for Price
Leadermac Hypermac LMC-630H Moulder 6-Head Machinewith Outboard Bearings MFG specs (to be confirmed): HEAD HP CUTTERHEAD SWING HOOD SIZE 1) 1st Bottom Head 20 HP 4.9” to 7.1” (125 – 180 mm) 5.9” (150 mm) 2) Right Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 3) Left Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 4) 1st Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 5) 2nd Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 6) 2nd Bottom Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) side heads are opposed. Directly Opposed Side Heads in lieu of staggered side heads including Air/Hydraulic Quick secure Position Locking System Easy set motorized positioning system for near side and top head Increased spindle speeds to 8000 RPM in lieu of standard 6000-RPM With 8000 rpm Spindles you will realize a 33% increase in productivity over std. 6,000 rpm Hydro-Loc Quick Change Outboard Bearings Timing belt (Poly Chain) Drives on 2 Top Heads & Last Bottom Head 2 part Sectional Pad Pressure Plates after 2nd Top Head with 2 separate pressures and fine adjustment to the outside shoe in lieu of single pressure plate Pneumatically operated Auto Feed Table Lubrication System utilizing Stand Alone Operators Control Console on HD wheels w/1.6.5 ft of Remote – Hand held Pendant Push Button Control (Jog Forward/Reverse Beam Up/Down) with 12 feet of power cord to help with setup Pneumatic Low Pressure Safety Control (if the air pressure drops below the accepted run level the moulder will shut down or will not operate)
Call for Price
Leadermac Moulder 12" Capacity 10-Heads: #1 10 HP, #2 25 HP, #3 25 HP, #4 25 HP, #5 25 HP, #6 30 HP, #7 30 HP, #8 30 HP, #9 30 HP, #10 15 HP 140 FPM with 15 HP feed motor ATS Heads on Top and Sides Second machine available for parts only: Spare castings, gearboxes, pendulums, control panel, spindles
Call for Price
Leadermac LMC-623H Moulder with Infeed Deck This system has not run in year and will need repair.
Call for Price
Leadermac LMC 418-S 4 head moulder 20-80 FPM feed spiral head on bottom 460 volt 3 phase
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
6,000,000 BTU max output 400,000 BTU min output 94% thermal efficiency Natural gas fired never used…damaged in transit…cosmetic damage only