These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the machine to produce twisting rope. Manufacturer specs (to be confirmed): - Type L.C.B. 600 - .75 kW feed motor - 1.5 kW drawing unit - 1.5 kW right cutter motor - 1.5 kW left cutter motor - Workpiece diameter: min 8 mm, max 60 mm - Workpiece length: infinite - Feed speed: 15-80 RPM - Spindle diameter: 18 mm - Includes (1) cutter on drawing unit used for rope moulding - 3-4" dust ports - Splitter machine to cut dowels in two - (4) different diameter cutters and dies

(2) Rigma Roll Coaters available Model RR-W4CCB 1350 Max capacity

CR 3553 profile sander 2 HP TEFC Motor Direct drive spindle which tilts 90° forward & 20° backward

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

This machine will be available around September 1 2020.

FX-H 33-/310 Front Loading Panel Saw

Schutte model 280.100 Hammer Mill Includes: (2) 125 HP Motors - new 480v and used 575v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand and soft start

2008 SCM Morbidelli Universal 3612

SCMI Olimpic K201 Edgebander

SCMI S630K Planer 10 HP Motor Straight Knives

SCMI Sliding Table Saw

SCMI Superset 23 5-Head moulder •5 head machine •9” x 5” capacity •Motorized thickness adjustment for top pressure beam and top horizontal spindle •Digital displays for final width and thickness. •All spindles belt driven to deliver 6000 rpm •First bottom head: 12Hp •Right and left vertical spindles: 12HP shared •Top horizontal head: 18Hp •Last Universal: 12HP •Variable speed: 13-79 ft/min with 4.8Hp feed motor •Electrical 230v 3ph ; 154amps •1 13/16” spindle diameters •2 meter long adjustable infeed table

SCMI Superset XL Moulder 480 V/3 PH

Routech Accord 40 NCT 3-axis CNC Router 3650 mm x 1620 mm nesting area 15 KW 24000 rpm router head Drill banks in the X and Y axis Panel loader as pictured (2) Becker 5.5 KW vacuum pumps Carousel type tool changer

Working Areas: X-Y Axes Dimensions (Depending on Machine Configuration) (Mm): 5510×1320 Axes: Vectorial Speed X-y Axes M/min: 56 (Prospace), 78 (Prospeed) Z Axis Panel Passage mm: 180 Routing Unit: Motor Power (Max.) Kw (Hp): 15 (20,5) Rotation Speed (Max.) Rpm: 24000 Available Tools on Tool Changer (Max.) Places: 24 Spindle: HSK63 Machine has a drill block that was never used. Still under power but ready to move.

SCMI S630 Planer Capacity 24” x approx. 10” Straight 4-knife cutterhead Sectional chipbreaker and sectional infeed roller Cutterhead motor: 12HP, 230v (currently wired)/460v, 3PH 39” long bed with (2) idler rollers 2 rubber coated outfeed rollers with air assist Motorized raise/lower Includes manuals Solid machine. Currently replacing all bearing and thoroughly cleaning down to the bolts. Operating Instructions, Parts manual, wiring diagram included. Extra set of knives included. Weighs 2000lbs+

Motor Horsepower 12 HP Working Width 630mm (24 3/4”) Working Height 3 – 300mm (1/8” – 11 3/4”) Max. Depth of Cut 8mm (5/16") Minimum Length of Stock 260mm (10 1/4”) Cutter Head Diameter 120mm (4 3/4") RPM 4500 No. of knives 105 Knife Dimensions 15mm x 15mm x 2.5mm Table Size 630mm x 1000mm (24.75” x 39.4”) Feed Speeds (Variable) 4 - 20 m/min (13 - 65 FPM) Infeed Roller Steel sectional, power driven Outfeed Roller (x 2) Rubber, power driven Dust Hood Diameter 150mm Noise Level (dB) 70 Overall Dimensions (L,W,H) 51" x 40" x 45” Shipping Weight 1230kg (2,710 lbs) Net Weight 1155 kg (2,550 lbs) Electrical Requirements 45 amps @ 230 volts Dust Extraction 980 CFM

Working height 120 mm working width 240 mm feed speed 6-36 fpm 6’6” straightening infeed

This machine needs some cleaning up. It is still used periodically in the current shop.

Combination Head Motor HP 18 HP Motor Type Single Speed Abrasive Belt Speed 18 mps Drum Size 120 mm Drum Type 85 Sh Rubber Platen Size 50 mm Abrasive Belt Length 60" 1st Working Unit Working Width 950 mm Number of Heads Available 1 Feed Motor .7 HP Feed Speed 15 or 30 fpm Maximum Work Piece Thickness 160 mm Minimum Work Piece Length 12.5" Abrasive Belt Size 37" X 60" Compressed Air Requirements 6 Bar (88 PSI) Dust Outlets 1 outlet @ 140 mm Exhaust Requirements 900 CFM Power Requirements 54 amps @ 230V Three Phase