Holzher 1265S Vertical Panel Saw

Overall Length: 19.37' Workpiece thickness min./max (inch): 1.77? Edging thickness(inch): 0.01-0.12? Edging height max (inch): 1.97? Cut edging length min. (inch): 13.78? Workpiece with min. 9inch): 2.36? Workpiece length min. (inch): 7.09? Feed Speed (m/min). 8 Pre-milling cutter unit (m3/h): 900 Flush trim: 280 scraper unit: 280 static underpressure: – pre-milling cutter unit: 1490 flush trim unit:1650 Compressed Air (bar): 6 Features: The SPRINT 1317 series is equipped as standard with the 1906M cartridge glue application system -Fast change of glue -Ready to start in 3.5 minutes -One of a kind – the 1905 MULTI-SYSTEM -Advanced Glue Application System – for a secure joint -Profile trimming at the press of a button HOLZ-HER Control System – high standards safeguard it for the future ¦ Powerful PLC control for rational set-up and operation. ¦ User friendly interface – all information in plain text

Holz-her edgebander This machine is still under power and available for inspection.

Holz-her Cut 85 Panel Saw; under power until 8/21 model 6210

Holzher Ergebender

Holz-her Vertical 1265 Vertical Panel Saw

Holzma HPP250R/32/32 Panel Saw System has been professionally dismantled and is ready to load!

Holzma OPT.HpPS81/38 Panel Saw

Holzma Optimat Rear Load Panel Saw, Model: HPL 11/43/16 Year: 2006 4 Front Air Floatation Tables 169” Cutting Length & Pull Back 4.9 Blade Projection 18 H.P. Blade Motor 3 H.P Scoring Blade Motor Variable Saw Carriage Speed 32-410 FPM 10-125 MPM Constant Return Lift Table 230 Volts, 3 Phase, 60 Cycle Operation

Holzma HPL11 Rear Load Panel Saw Still under power. Ready to be removed the end of January 2024

- Model No HPP 250 - Year of manufacture 2007 - Cutting length 3200 mm - Pusher stroke 3200 mm - Saw blade projection 80 mm - Saw Diameter 350 mm - Main Motor 9.2 kW - Scoring Unit yes D=200mm - Scoring Motor 1.1 kW - Single sided side-aligner - Number of grippers-6 - Continuously variable feed - Graphical cutting pattern - Air pressure required 6 bar - Total air requirements 150 NL/min - V min. velocity at ducts approx. 25 m/s - Negative pressure min. 1200 Pa - Suction capacity 3800 m?/h - Duct for channel connection 1 pce 160 mm - Duct for pressure beam connection 1 pce 140 mm

Homag Centateq N300 CNC Router 5x10 Table Offload conveyor Schmaltz overhead gantry system

Homag D-200 Drill & Dowel Inserter

Homag Drillteq V200 Model Optimat BHX 055

Homag SWT 100 series includes the following features: Height Adjustment System – 100 Series Conveyor bed is adjusted by four (4) large diameter dual supported threaded spindles • Calibration sanding • Veneer sanding • Fine sanding of solid wood • One machine for multiple sanding jobs • Easy to use and quick setup times • Automatic Star Delta starting • Maintenance-free electrical main motor braking • Electronic abrasive belt oscillation with photo eyes • Pneumatic tensioning of abrasive belt • Safety switch-off of machine during faulty operation • Rubberized pressure rollers • Workpiece thickness: 3 mm to 160 mm (1/8" to 6") • Working width: 1100 mm (43") • Abrasive belt width: 1120 mm (44") • Abrasive belt length: 1900 mm (75") • Abrasive belt changing side: left Conveyor Drive System Variable frequency-controlled feed speeds of 2.5 – 13 m/min. (18 – 42 ft/min.) with automatic conveyor belt tracking and rubber drive roller Touch Screen Display and Control ECO Mode Automatic machine stop with advance warning function for energy saving during idle time of the machine. Head 1: R Head - Steel Profiled Contact Roller Sanding Unit This sanding head features a 140mm (5.5”) diameter profiled steel contact roller with automatic positioning of the contact roller upon selection with integrated grit compensation. The steel contact roller is ideal for calibration, providing optimal calibration sanding results: Features & Details: HOMAG SANDTEQ W-124 RC (continued) • 15.6" graphically supported color touch screen • LCD-TFT color screen with 800 x 600 resolution • Metric or decimal inch input (3 decimal places) • 125 program memory • Automatic machine control • One-button start (Star Delta) • Sequential motor starting • Plain text error messaging at the operator terminal • Program backup via USB stick possible • Controls air or segmented pad options (only on models such feature) • Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Maintenance-free electrical motor braking (no wearable parts) • Grit compensation and automatic positioning for calibration • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation • Contact Roller (Steel): 140 mm (5.5”) • Drive motor: 17.4 kW (23 hp) • Belt speed: 18 mps (59 fps) • Dust outlet size: 160 mm (6.5") Head 2: C-Head – Combination Head Sanding Unit This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled rubber roller is ideal for light calibration or finish sanding while the segmented pad provides performance versatility depending on the application: EPS Electro-Pneumatic Segmented Pad System (Head 2) This head is equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 35 mm pad resolu

- Min. panel height 0.47 inch - Max. panel height 1.57 inch - Min. edge thickness 0.01 inch - Max. edge thickness 0.24 inch - Max. forward feed speed 82.02 ft/min - Top pressure with rubber belt - No. Panel Sizing / Milling units 2 Pre-milling unit - Lamps to preheat the side of the panel - Edge coil magazine - Gluing system - glue pot for EVA hot melt glue - premelter for EVA hot melt glue - QA65 - Roller set to press the edge - no. pressure roller 7 - with positioning by NC No. Edge Processing Units 6 First Processing Unit - End trimming Constructor model HL81 - no. motors 2 - with positioning by NC Second Processing Unit - top and bottom rough trimming - no. motors 2 - with positioning by NC Third Processing Unit - Multi Function trimming and corner rounding - Constructor model - FK11 - no. motors 2 - with positioning by NC Fourth Processing unit - edge scraping - with positioning by NC Fifth Processing Unit - glue scraping - with positioning by NC Sixth Processing Unit - buffing - no. motors 2 Spray unit Control system Power Touch

Manufacturer’s Specifications - For banding edges of up to 3 mm and workpieces of up to 40 mm (60 mm - 1130 FC | 1130 AT) - Glue applied directly onto the workpiece to ensure constant application (i.a. for processing of PUR-glue). - Two-motor end-trimming unit for optimum cutting results - Contour trimming unit for rounding corners - Freely configurable post-processing for a high level of flexibility - Zero joints - airTec unit for a perfect zero joint finish

Homag Espana CH-03/32/32-PLUS Panel Saw Still under power and available for inspection. 230/480 V

Homag BST 500

As Taken From Service: Includes return conveyor